Uniden App Cam Spotlight Manual de usuario

App Cam

Spotlight

INSTRUCTIONS

Damages caused by non-compliance with this Owner’s Manual will void

the warranty! We will not assume any liability for damages to items or

persons caused by improper handling or non-compliance with the safety

notices! Any warranty claim will be null and void in such cases.

• Do not drop, puncture or disassemble the camera. This camera is not

waterproof. DO NOT expose the camera to water or moisture.

• Never tug on the power cords. Use the plug to unplug it from the outlet.

• Do not expose the camera to high temperature or leave it in direct

sunlight. Doing so, may damage the camera or cause temporary

camera malfunction.

• Use the devices with care. Avoid pressing hard on the camera body.

• For your own safety, avoid using the camera or power off the camera

when there is a storm or lightning.

• Disconnect the power adaptor during long periods between usage.

Use only the accessories and power adaptors supplied by Uniden.

WIRELESS DEVICES OPERATING RANGE

Ensure the signal reception is acceptable between the camera(s) and the

WiFi router. If necessary, reduce the distance between them to improve

overall system performance. As local internet environments may vary,

your device may indicate that the camera is disconnected or may display

a black screen. If this occurs, refresh the app.

Important Safety precautions

CONTENTS

INSTRUCTIONS �� 2

CONTENTS �� 3

OVERVIEW� �� 4

Features ................................................................................... 4

WHAT’S IN THE BOX? �� 5

GETTING TO KNOW YOUR APP CAM SPOTLIGHT �� 6

INSTALLATION �� 7

General Placement Considerations ......................................... 7

Installing the Camera ................................................................7

INITIAL CAMERA SETUP �� 8

Prerequisites ............................................................................8

Option 1: Smart Cong Connection ..........................................8

Option 2: Access Point Connection ........................................ 11

LIVE VIEW ��17

Event List Details ..................................................................... 18

ADVANCED SETTINGS�� 19

CAMERA POWER LED INDICATOR �� 22

TROUBLESHOOTING �� 23

SPECIFICATIONS �� 24

WARRANTY �� 25

OVERVIEW

Uniden’s App Cam Spotlight camera works with your smartphone to

create a powerful home security network. No PC interface is needed

to view video on your smartphone or wireless devices. The wireless App

Cam Solo offers superior quality video with true colour. It is suitable for

day or night time use.

Features

App Cam Spotlight

• No PC required

• WiFi connection to router

• P2P connection

• Records HD 720P

• Motion recording to built-in storage

• Built-in 32GB storage

• High definition video

• Two-way audio

• IR cut filter switch

• Night vision range up to 12 metres

• Built-in microphone and speaker

Camera Power

Adaptor* Quick Start Guide

Screws and

anchors

App Cam

Spotlight

• Image may vary slightly from the actual product.

• If any item is missing or damaged, contact your place of purchase immediately. Never use damaged

products!

• Need help? Get answers at our website:

www.uniden.com.au for Australian model.

All trademarks are registered trademarks of their respective owners.



In the Box

Model App Cam Spotlight

QSG 1

Power Adapter 1

Mounting Screw Kit 1



WHAT’S INSIDE THE BOX



Front View

Side View

GETTING TO KNOW YOUR APP CAM SPOTLIGHT

• The cameras included are weatherproof and have an IP64 weather

rating. Water can be sprayed on them and they will still work;

however, the cameras cannot be submerged underwater.

• Although the cameras can be exposed to the rain splashes, it is

recommended that, if they are used outdoors, they be mounted

under some type of cover like a patio overhang or eave. As rainwater

drops start to dry on the camera glass, it can create spots that will

reflect the light from the infrared LEDs used for night vision, thus

causing lower quality video.

• Also, as dust, grime, and cobwebs accumulate on the camera glass,

they can reflect light from the infrared LED and might lower video

quality. Periodically, clean the lens glass with a soft cloth.

General Placement Considerations

Consider the following when placing the camera:

• Avoid having a direct light source in view of the camera. This

includes street lights, ceiling or floor lamps, spotlights in the

driveway, etc.

• The cameras are equipped with built-in infra-red LEDs so you can

use night vision for 24-hour surveillance. The LEDs automatically

activate at night and the picture viewed turns to black and white. The

night viewing range is up to 12 meters. Avoid pointing the camera

lens directly at clear glass; the night vision LEDs will cause a blurred

image.

Installing the Camera

When you are positioning the camera, it is recommended to connect the

camera to the router first.

1. Install the antennas (if needed), position the camera where you want it

2. Hold the base of the camera stand where you want to mount it and

mark the location of the screw holes.

3. Use the included screws and anchors to attach the base to the wall or

ceiling.

4. Tug gently on the stand to make sure it is securely in place.

5. Connect one end of a AC adaptor to the camera’s power pigtail and

plug the other end into a standard indoor power outlet.

6. Adjust the camera viewing position, if needed.

INSTALLATION

Prerequisites

• You must have an available Wi-Fi-enabled Smartphone (Android or

iOS smartphone).

• The App Cam Spotlight and your mobile device must within the same

Wi-Fi network range for initial setup (ideally within 3m from the router).

• Wi-Fi router connection is 2.4GHz and password if any.

1. Search and download the Uniden LightCam App from the App Store

for iOS devices or Play Store for Android devices.

2. Connect the camera with supplied power adapter. Connect the

power adapter to power outlet and switch it on.

• The LED will start with a solid green then after 10 seconds it will

switch off. Approximately 15 seconds later, it will begin flashing

green meaning the boot up is complete.

There are two options to connect the camera with

smartphone : Smart Config connection and Access

Point connection.

Option 1: Smart Config Connection (simpler)

1. Make sure your smartphone is connected to a 2.4GHz enabled Wi-Fi

router network which the camera is going to use.

2. Make sure the power LED of the camera is in fast flash mode.

3. Open the LightCam app.

4. Tap ‘+’ at the top right corner and select ‘Smart Config’.



INITIAL CAMERA SETUP

5. Enter the local Wi-Fi router password on the pop-up then tap next.

6. Enter the camera default password: ‘000000’ then tap “save” to

complete the connection.

7. Once the camera is connected to the Wi-Fi router successfully, please

make sure the status is ‘connected’. If the network is not stable, the

camera will lost connection, please press and pull down the screen,

the connection will refresh automatically.



8. Tap the camera icon and you will be prompt to modify the camera

password to a more secure password.

9. Please input 8-16 characters with a mix of alphabetic characters and

numbers and tap “save” to save your new password.

10. Tap the snapshot view for view video stream. If the network is not

stable, the camera will lost connection, please press and pull down

the screen, the connection will refresh automatically.



Tabla de contenidos

Otros manuales de Cámara de seguridad de Uniden

Uniden

Uniden UDW10055 Guía del usuario

Uniden

Uniden UDR444 Manual de usuario

Uniden

Uniden App Cam Solo 4G PT Manual de usuario

Uniden

Uniden App Cam Spotlight+ Manual de usuario

Uniden

Uniden GNC 701 Manual de usuario

Uniden

Uniden UDR444 Manual de usuario

Uniden

Uniden Guardian GC45 Manual de usuario

Uniden

Uniden App Cam Floodlight Manual de usuario

Uniden

Uniden APPCAM PAN/TILT Manual de usuario

Uniden

Uniden AppCam 50HD Manual de usuario

Uniden

Uniden LightCam 35HD Manual de usuario

Uniden

Uniden App Cam Solo+ Manual de usuario

Uniden

Uniden Guardian App Cam Solo Manual de usuario

Uniden

Uniden AppCam Solo 2 Manual de usuario

Uniden

Uniden UWS1100 Manual de usuario

Uniden

Uniden 4KTPD-MVF Manual de usuario

Uniden

Uniden UDR444 Manual de usuario

Uniden

Uniden UDRC58HD Manual de usuario

Uniden

Uniden SOLO+ Manual de usuario

Uniden

Uniden APPCAM23A Manual de usuario

Uniden

Uniden NVR - 8 Manual de usuario

Uniden

Uniden AppCam 25HD Manual de usuario

Uniden

Uniden Guardian GC45 Manual de usuario

Uniden

Uniden GC43 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario