Tuff Tonneaus 144 Guía de instalación

TONNEAU FITTING INSTRUCTION

Ford PX Ranger Single Cab (with head board)

Nov 2011-May 2013

Part number: 144

Package includes

 1 X Tonneau cover  4 x Bar Brackets (300474)

 2 x Tonneau Support Bar (300516)  40 x Rivets (300482)

 3 x luminium Rope Track-403mm long ea.  1 x Lock Bracket

 1 x Support Bar Sheath  24 x Rope Buttons (300473)

 1 x Fitting Instructions  4 x Dowel

 1 x Warranty Card  2 x 100mm angle pieces (S-0047)

2 | P a g e

Table of Contents

1. TONNE U COVER FITTING .............................................................................................................. 3

1.1 B SIC TOOL REQUIRED ................................................................................................................. 3

1.2 TONNE U COVER INST LL TION PROCEDURE ............................................................................ 3

2. TONNO LOCK ................................................................................................................................... 5

2.1 B SIC TOOL REQUIRED ................................................................................................................. 5

2.2 TONNO LOCK CONTENTS .............................................................................................................. 5

2.3 FITTING TONNO LOCK ................................................................................................................... 5

3. MULTI-FIT SUPPORT B R ................................................................................................................ 6

2.1 B SIC TOOL REQUIRED ................................................................................................................. 6

2.2 MULTI-FIT SUPPORT B R CONTENTS ........................................................................................... 6

2.3 FITTING MULTI-FIT B R ................................................................................................................ 6

3 | P a g e

1.1.

1. TONNEAU COVER FITTING

TONNEAU COVER FITTINGTONNEAU COVER FITTING

TONNEAU COVER FITTING

NOTE

Read entire instructions prior to start.

1.1 BASIC TOOL REQUIRED

1.1 BASIC TOOL REQUIRED1.1 BASIC TOOL REQUIRED

1.1 BASIC TOOL REQUIRED

Drill, 4mm Drill Bit, Rivet Gun, Marking Pencil / Pen

1.2 TONNEAU COVER INSTALLATION

1.2 TONNEAU COVER INSTALLATION 1.2 TONNEAU COVER INSTALLATION

1.2 TONNEAU COVER INSTALLATION PROCEDURE

PROCEDUREPROCEDURE

PROCEDURE

1 Fit the pieces of angle to the outside edge of the head board making sure the top

flat edge of the angle is at the same height as the top lip of the head board Drill two

4mm holes in each piece of angle, silicone behind is, then rivet into place

2 Using two pieces of dowel, join the 3 aluminium rope tracks together Place the

other 2 pieces of dowel in the ends of the now joined rope track

3 Rest the aluminium rope track on the pieces of angle already fixed in place, and

push forward to the vertical face of the head board See Figure 1

4 Using a 4 5 mm drill bit, drill 6 holes 50mm from the end of each of the aluminium

rope tracks into the front of tub

5 Once all the holes have been drilled, remove the dowelling pieces Squeeze silicon

along the back of the rope tracks and pop rivet into place

6 To fit bar brackets measure 750mm and 1500mm back from the inside front edge at

the top of the tub and place them as shown in Figure 2 (5mm down from top edge

of tub) Drill and rivet using two large rivets for each Bar Bracket Install support bar

according to supplied instructions

7 To fit round body hooks to the tail gate, measure 465mm up from the bottom edge

of the tail gate and line up each hook individually to each bunji loop starting with the

two either side of the tailgate handle and working your way to the outside, drill and

rivet buttons alternating from side to side

8 To fit round body hooks to the sides of the tub measure 155mm down from the

inside edge and line up each hook individually to each bunji loop Start with the two

rear bunjis and work your way around to the front, drill and rivet buttons alternating

from side to side

4 | P a g e

Figure 2: Placement of

bar bracket

750mm &

1500mm

Figure 1: Placement of

aluminium rope track.

Ensure channel is above

the tub’s top edge.

5 | P a g e

2.2.

2. TONNO LOCK

TONNO LOCKTONNO LOCK

TONNO LOCK

The Tonno Lock is now a standard feature included with all

Tuff Tonneaus. The Tonno Lock is situated at the front of

the tonneau cover, so as not to impede the accessibility of

the Tuff Tonneau.

Fitting the lock is simple and only requires a small

attachment on the inside edge of the tub behind the cab.

Together with a padlock, it provides you with an extremely

effective theft deterrent. The Tonno Lock is designed to suit

all utes and prevent thieves stealing your Tuff Tonneau, so you can continue to rely on the Tuff

Tonneaus’ name to give you what you want in a tonneau cover.

2.1

2.1 2.1

2.1 BASIC TOOL REQUIRED

BASIC TOOL REQUIREDBASIC TOOL REQUIRED

BASIC TOOL REQUIRED

Rivet gun, Drill, Torch, and Marking Pencil/Pen.

You will need to buy a small Padlock- make sure the padlock will go through the hole on the Tonno lock.

2.2

2.2 2.2

2.2 TONNO LOCK CONTENTS

TONNO LOCK CONTENTSTONNO LOCK CONTENTS

TONNO LOCK CONTENTS

- 2 X 4MM luminium rivets

- 1 x Tonno Lock bracket

2.3

2.3 2.3

2.3 FITTING TONNO LOCK

FITTING TONNO LOCKFITTING TONNO LOCK

FITTING TONNO LOCK

1. ttach the black lock bracket to the bracket on the tonneau with your padlock, and fit the tarp.

2. Getting under the tarp with a torch, place the lock bracket against the body and mark holes with a

pen.

3. Remove tonneau and drill the marks with a 4 mm drill bit, place the lock bracket in position and

rivet.

6 | P a g e

3.3.

3. MULTI

MULTIMULTI

MULTI-

-FIT SUPPORT BAR

FIT SUPPORT BARFIT SUPPORT BAR

FIT SUPPORT BAR

The Tuff Tonneau Multi - Fit Support Bar is designed to fit

almost all Utes on the Market, from Suburu Brumbys to

Cab Chassis aluminium trays.

Part No: B R DJ

2.1

2.1 2.1

2.1 BASIC TOOL REQUIRED

BASIC TOOL REQUIREDBASIC TOOL REQUIRED

BASIC TOOL REQUIRED

Drill, 4mm drill bit

2.2

2.2 2.2

2.2 MU

MUMU

MULTI

LTILTI

LTI-

-FIT SUPPORT BAR

FIT SUPPORT BARFIT SUPPORT BAR

FIT SUPPORT BAR

CONTENTS

CONTENTSCONTENTS

CONTENTS

- 1 x hollow bar centrepiece - 2 x grub screws

- 2 x solid bar end piece - 1 x Tonneau bar sheath

2.3

2.3 2.3

2.3 FITTING

FITTING FITTING

FITTING MULTI

MULTIMULTI

MULTI-

-FIT BAR

FIT BARFIT BAR

FIT BAR

1. Insert solid bar pieces into either end of hollow tube. djust bar so it fits between bar bracket

holders with the holes facing to the ground (so the grub screws don’t rub against the tonneau),

as shown above and then with a white pencil make a mark through the small holes of the

hollow bar onto the solid ends. This is where you will drill a hole to the depth of about 1-2mm

(do not go any further)

2. Join the pieces back together and screw grub screws through the hollow bar into the holes that

you drilled.

Make sure you o not over tighten the grub screws

. Then place the

tonneau sheath over the bar to stop the bar wearing against the tonneau. Refit the bar. You

may kink the bar in the middle to give it some extra height to assist with water runoff.

Warning if you o not fit the tonneau sheath over the bar, the tonneau cover will quickly wear

through which is not covere by warranty.

Your Tuff Tonneau is now ready for work.

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Tuff Tonneaus

Tuff Tonneaus

Tuff Tonneaus 501 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 10634 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 141 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 524 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 521 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 211SB Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 431SB Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 10812 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 341 Manual de usuario

Tuff Tonneaus

Tuff Tonneaus Ford PX Ranger Space Cab Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 11303 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 10522 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 411 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 325 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 10018 Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 507 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 325NSB Manual de usuario

Tuff Tonneaus

Tuff Tonneaus Bunji Ute Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 431SB Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 660 Manual de usuario

Tuff Tonneaus

Tuff Tonneaus 142 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 251 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 510 Guía de instalación

Tuff Tonneaus

Tuff Tonneaus 413 Guía de instalación

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario