TRENDnet TV-IP262P Manual de usuario
TRENDnet User’s Guide Cover Page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
i
Contents
Product Overview....................................................................................2
Package Contents......................................................................................................2
Features....................................................................................................................2
Product Hardware Features.......................................................................................3
Application Diagram..................................................................................................4
Installation...............................................................................................5
HardwareInstallation............................................................................................5
CameraInstallation...............................................................................................6
Starting IPSetup.......................................................................................9
Configuration.........................................................................................12
ViewingCameraBasic Function................................................................................12
Configuring the Camera Setting...............................................................................13
SmartWizard...........................................................................................................14
Basic........................................................................................................................15
Network..................................................................................................................17
Video& Audio.........................................................................................................20
EventServer............................................................................................................23
MotionDetect.........................................................................................................26
EventConfig............................................................................................................27
Tools.......................................................................................................................29
SD Card...................................................................................................................29
DeviceInfo..............................................................................................................31
How to setup/access the camera behind a Router................................32
Technical Specifications.........................................................................35
Troubleshooting.....................................................................................36
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
2
Product Overview
TV-IP262P
Package Contents
TV-IP262P
Multi-Language Quick Installation Guide
CD-ROM (Utility&User’sGuide)
Network cable (1.5m / 5ft)
Power adapter (12V DC, 1.5A)
Camera mounting kit
If any package contents aremissing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features
The Megapixel PoE Dome Internet Camera (model TV-IP262P) is an indoor, enterprise
class surveillance camera capable of transmitting H.264 video at up to 1280 x 1024
resolution. View and manage the tamper resistant domeIP camera from any computer
with an internet connection.
Manually pan the camera side-to-side350 degrees and tilt it up-and-down 70degrees to
fix its final viewing position. No need to install this camera near a power source, power
and data are received through a single Ethernet cable using Power over Ethernet (PoE)
technology. View this camera on your mobile device with TRENDnet’s free mobile App*.
Manage up to 32 TRENDnet cameras with the included complimentary camera
management software**. Define up tothreemotion detection windowswithemail
alert, image snapshot, and continuous recording triggers. Scheduled recording sessions
and define video storage location with Samba client support. Multiple video streaming
support for H.264, MPEG-4,and MJPEG compression types. Other features include two-
way audio support (mic and speaker sold separately), date/time text overlay, mask
overlay to conceal sensitive areas, and image flip capabilities for upside down
installations. Integrated cabling allows for easy wall/ceilingmounting and the off-white
IP camera housing blends into most environments.
* TRENDnet’s Mobile APP supports iPhone®, iPad®, iPod® Touch and
Android. Search for SecurView Mobile from iTunes® or Google Play™.
For future updates, please check www.trendnet.com/App
for details.
** Monitoring multiple cameras may required a high performance CPU
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
3
Product Hardware Features
Rear Panel View
Power : Connect theprovided AC power adapter to supply power to the
camera.
SD Card Slot: Insert a memory card for expansion of storage.
Ethernet Cable Connector: Connect the provided network cable (RJ-45 type)
-The connector supports Power over Ethernet standard, enabling the camera
to be powered by the Ethernet.
Mic In: Connect an external microphone.
Line Out: Connects an external active speaker.
Reset: Press and hold the reset button for five seconds to reset the camera to
factory default settings.
Front Panel View
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
4
Inside Component
LED indicators
-Power: Indicate the camera is powered on with the steady amber
light.
-Link: Indicate the camera’s network connectivity with the flashing
green light.
Application Diagram
Unscrew four screwsto
disassemble the Dome
cover.
Lens assembly with
the adjustable base
LED indicators
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
5
Installation
Hardware Installation
The camera can be mounted to the ceiling surface directly by following the steps below:
1. Remove the Dome cover by unscrewing the four screws.
2. Use the includeddrill template to drill three mounting holes on the desire location
and hammer the plastic anchors into the holes.
3. Secured the camera to the location with three screws.
4. Before put the Dome cover back, adjust the lens assembly by the following steps:
Tilt the camera lens to a proper position by loosing the screws () and then
swinging the adjustable base ().
Rotate the camera lens by turning the base pedestal () in either clockwise or
anti-clockwise direction.
Adjust the lens focus by turning the lens ring slowly () in either clockwise or
anti-clockwise direction.
NOTE:You can reviewthe image quality fromthe Web browserwhen you complete the
installation. If the image quality is poor, you haveto disassemble the Dome cover to
adjust the lens focus until the desired image appears clearly.
5. Put the Dome cover back and secure with four screws.
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
6
Camera Installation
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate
the Auto-Run program.
2. lick the Install Camera.
3. Write down the MACID of the camera
4. Connect one end of the power adapter into the Power Connector, then click on
Next. Please click Next if you are using the PoE injector or switch.
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
7
5. Connect one end of the Ethernet (Network) Cable to the camera’s Ethernet
Port, and then connect the other end of the Ethernet cable to the router’s LAN
Port.
6. Wait while camerais searching.
7. The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than one
camera in the same Network, you will need to identify the camera by the MAC
ID.
8. Type in the Password. The password is “admin” by default. If you would like to
change camera’s password,check the Change Password now.
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
8
9. Type in the new and confirm the new password by entering the password
twice.
10. Click TV-IP262Pto access to the camera webpage.
11. Click Finish to exit the program or click Home return to the main screen.
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP262P
9
Starting IPSetup
The camera comes with a conveniently utility, IPSetup,which isincludedin the
Installation CD-ROM, allowing you to search the camera on your network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate
the Auto-Run program.
2. Click the IPSetup from the Auto-Runmenu screen. Then the IPSetup Wizard
will appear. Click Install to install the utility.
3. When the Completing theIPSetup Setup Wizard appears, click Finish.
Otros manuales para TV-IP262P
2
Tabla de contenidos
Otros manuales de Cámara de seguridad de TRENDnet
TRENDnet
TRENDnet SecurView TV-M7110WK Manual de usuario
TRENDnet
TRENDnet TV-IP420P Manual de usuario
TRENDnet
TRENDnet TV-IP1315PI Manual de usuario
TRENDnet
TRENDnet TV-IP343PI Manual de usuario
TRENDnet
TRENDnet TV-IP345PI Manual de usuario
TRENDnet
TRENDnet TV-IP201 Manual de usuario
TRENDnet
TRENDnet TV-IP310PI Manual de usuario
TRENDnet
TRENDnet TV-IP313PI Manual de usuario
TRENDnet
TRENDnet TV-IP315PI Manual de usuario
TRENDnet
TRENDnet TV-IP400 Manual de usuario
TRENDnet
TRENDnet TV-IP400 Manual de usuario
TRENDnet
TRENDnet TV-IP751WIC Manual de usuario
TRENDnet
TRENDnet TV-IP100-N Manual de usuario
TRENDnet
TRENDnet TV-IP310PI Manual de usuario
TRENDnet
TRENDnet TV-IP862IC Manual de usuario
TRENDnet
TRENDnet TV-IP212W - Wireless Internet Camera Server Manual de usuario
TRENDnet
TRENDnet TV-IP201 Manual de usuario
TRENDnet
TRENDnet TV-IP262PI Manual de usuario
TRENDnet
TRENDnet TV-IP322P Manual de usuario
TRENDnet
TRENDnet TV-IP400 Manual de usuario
