Totevision LCD-640 Manual de usuario

FRONT VIEW

BACK VIEW

BOTTOM VIEW

UP: Press this button to increase or decrease the value of the adjustment

functions.

DOWN: Press this button to increase or decrease the value of the adjustment

functions.

ENTER: Press this button for menu adjusting, selecting the menu you want with

“UP”or “DOWN”, then press this button again to enter the selected menu.

ON/OFF:Press this button to turn on the power.

Press and hold for more than 2 seconds to turn the power off.

Under power on condition, this button acts as input mode selector switch.

(VGA/ S-Video/Video).

VGA IN

S-VIDEO IN

VIDEO IN

DC 12V

OnScreen Display for Video Input

Video Main OSD Menu Figure

--- Press “ENTER” button to activate theOSD main as

shown on screen.

--- Press “UP” or“DOWN” button again to select theOSD

menu menu.

1. Brightness

---Press “ENTER” button to enter this mode.

---Press “UP” or“DOWN” button to select the desired

adjustment item.

*Brightness:Adjust the brightness of the panel.

*Contrast :Adjust the white color level of the image.

*Back Light :Adjust the back level of the panel.

*Recall:When you run the function, the monitor will be

setting to last status of the saving value.

*Exit:Return to last menu.

2. Video Quality

---Press“ENTER” button to enter this mode.

---Press“UP” or“DOWN” buttonto select the desired

adjustment item

* Brightness:Adjust the brightness of the panel

*Contrast:Adjust the white color level of the image.

*Gain: Adjust image to be the best.

*Saturation: Adjust the color saturation of the image.

*Hue:Adjust the color hue of the image.

*Sharpness:Adjust the image from weak to sharp.

*Recall: When you run the function, the will be setting to

last.

*Exit: Return to last menu.

Brightness

Contrast

Back Light

Recall

Exit

Video Quality

Brightness

Contrast

Gain

Saturation

Hue

Sharpness

Recall

Exit

3. OSD Function

---Press “ENTER”button to enter this mode.

---Press “UP”or “DOWN”button to select the desired

adjustment item.

*H Position:Adjust the horizontal position of theOSD

menu.

*V Position: Adjust the vertical position of the OSD menu.

*Language: N/A

*Display Func.: The method of OSD display.

*Recall:When you run thefunction, the monitor will be

setting to last.

*Exit:Return to last menu.

4. Image

---Press“ENTER” button to enter this mode.

---Press“UP” or“DOWN” button to select the desired

adjustment item.

*Video System:NTSC /PAL /SECAM /NTSC 4.43 /Auto

*Dithering:N/A

*Select Input:Press to select inputs VGA/S-Video/Video

*UP/DOWN: Normal /Reverse

*Right /Left: Normal /Reverse

*Exit : Return to last menu

5. Recall

---Press“ENTER” button to enter this mode.

---Press“UP” or“DOWN” button to select the desired

adjustment item.

*RecallAll:When you run the function, the monitor will be

setting to last.

*Exit:Return to last menu.

6. Exit Menu

OSD Function

H Position

V Position

Language

Display Func

Recall

Exit

Image

Video System

Dithering

Select Input

Up/Down

Right/Left

Exit

Recall

Recall All

Exit

Exit Menu

OnScreen Display for VGAInput

VGA Main OSD Menu Figure

---Press “ENTER” buttonto activate theOSD mainmenu as

shown on the screen.

---Press“UP” or“DOWN” button again to select the OSD

menu.

1.Auto Config

---Press“ENTER” button to enter this mode.

---Press“UP” or“DOWN” button to select the desiredad

adjustment item.

*Auto Config:Select “YES” to make the monitor have the

best efficiency.

*Exit:Return to last menu.

2. Position

---Press“ENTER” button to enter this mode

---Press“UP” or“DOWN” button to select the desired

adjustment item.

*H Position:Adjust the horizontal position of the image.

*V Position:Adjust the vertical position of the image.

*Auto Position:Select “YES” to auto adjust the vertical

and horizontal position.

* Exit:Return to last menu.

3. Brightness

---Press“ENTER” button to enter this mode.

---Press “UP” or“DOWN” button to select the desired

Adjustment item.

*Brightness:Adjust the brightness of the panel.

*Contrast:Adjust the white color level of the image.

*Back Light: Adjust the back light bule intensity.

*Recall:When you run the function, the monitor will be

setting to last status of the saving value.

*Exit: Returnto last menu.

Auto Config

Exit

Position

H Position

V Position

Auto Position

Exit

Brightness

Contrast

Back Light

Recall

Exit

4. Clock

---Press“ENTER” button to enter this mode

---Press “UP” or“DOWN” button to select the desired

adjustment item.

*Clock:Adjust video sampling clock.

*Phase:Adjust the noise of the image.

*Recall:When you run the function, the monitor will be

setting to last status of the saving value.

*Exit:Return to last meun.

5. Color

---Press“ENTER” button to enter this mode

---Press“UP” or“DOWN” button to select the desired

adjustment item.

*Color 9300 °K:Setcolor temperature of the image to

9300 °K

*Color 5500 °K:Setcolor temperature of the image to

5500 °K

*Balance Color:Adjust the color balance.

*User Color:Setthe RGB color of the image by oneself

define.

*Auto Balance: Automatic adjustment of thebalance.

*Adjust Color:Press “ENTER” button to enter color

adjustment. Press “UP” or“DOWN” button to adjust

R/G/B Color level and off set.

6. OSD Function

---Press“ENTER” button to enter this mode.

---Press “UP” or“DOWN” button to select the desired

adjustment item.

*H Position:Adjust the horizontal position of theOSD menu.

*V Position:Adjust the vertical position of OSD menu.

*Language:N/A

*Display Func.: The method of OSD display.

*Recall:When you run thefunction, the monitor will be

setting to last.

*Exit:Return to last menu.

Clock

Phase

Recall

Exit

Color

Color 9300°K

Color 5500°K

Balance Color

User Color

Auto Balance

Adjust Color

OSD Function

H Position

V Position

Language

Display Func

Recall

Exit

Clock

Phase

Recall

Exit

7. Image

---Press“ENTER” button to enter this mode.

---Press“UP” or“DOWN” button to select the desired

adjustment item.

*Mode Select:Change DOS mode resolution

640 x 400or 720 x 350 or 720 x 400

*Dithering:N/A

*Select Input:Press to select inputs VGA / S-video /Video

*UP /DOWN: Normal /Reverse

* Right /Left:Normal /Reverse

*Exit: Return to last menu.

8.Information

VGA Condition

Resolution and Frequency

9. Recall

---Press“ENTER” buttonto enter this mode

---Press“UP” or“DOWN” to select the desired

adjustment item

*RecallAll:Set default value to original setting

*Exit:Return to last menu

10. Exit Menu

Exit Menu

Information

Recall

Recall All

Exit

Image

Mode Select

Dithering

Select Input

Up/Down

Right/Left

Exit

Specifications

ModelNo.: LCD-640D

Screen Size:6.4”(Diagonal)x 2

Display Resolution:640 (H) x 480 (V)

PixelPitch (mm): 0.203 (H) x 0.203 (V)

ActiveArea (mm):129.6 (H) x 97.44 (V)

LCD Profile Ratio:4:3

Color Configuration:R.G. B.Vertical Stripe

Brightness Rating:300 Nittyp

InputSignal:NTSC / PAL (DUAL.CAPABLITY) / SECAM /

NTSC4.43

Number ofPixels: 262,144 Dots

ViewingAngle: Left & Right 55 Degree

Down 30 Degree

Top 10 Degree

PixelConfiguration:Stripe

Video Input Signal Level:1V p-p (Positive)/ 75 ohm

Operating Temperature:0℃~+60℃

Storage Temperature:-20℃~+70℃

DC Power Supply:DC 12V In(From Power Supply)

Power Consumption:<9 W

Connectors: DC-In, RCA Video, S-Video, D-SUB

Response:30ms/Rising Time, 50ms/Falling Time

Dimensions: 291.0 (H) X 214.0 (W) x 37.9 (D) mm

Package Contents

A. Dual 6.4”TFT LCD Module with Rack

B. AC Adapter x 2

C. RCA Cable x 2

D. S-Video Cable x 2

E. D-SUB Cable x 2

Otros manuales para LCD-640

Tabla de contenidos

Otros manuales de Monitor de Totevision

Totevision

Totevision LCD-1900V Manual de usuario

Totevision

Totevision LCD-566T Manual de usuario

Totevision

Totevision LCD-703HD1 Manual de usuario

Totevision

Totevision LCD-1700VRZ Manual de usuario

Totevision

Totevision LCD-702 Manual de usuario

Totevision

Totevision LCD-410 Manual de usuario

Totevision

Totevision LCD-1700VR Manual de usuario

Totevision

Totevision LCD-5200HD Manual de usuario

Totevision

Totevision LCD-561R Manual de usuario

Totevision

Totevision LCD-703HD Manual de usuario

Totevision

Totevision LCD-841D Manual de usuario

Totevision

Totevision LCD-641V Manual de usuario

Totevision

Totevision LCD-2007HD Manual de usuario

Totevision

Totevision LCD-1048HDM Manual de usuario

Totevision

Totevision LCD-1700TS Manual de usuario

Totevision

Totevision LCD-4700HD Manual de usuario

Totevision

Totevision LCD-400X4 Manual de usuario

Totevision

Totevision LCD-1047HD Manual de usuario

Totevision

Totevision LCD-643 Manual de usuario

Totevision

Totevision LCD-1044T Manual de usuario

Totevision

Totevision LCD-1700V Manual de usuario

Totevision

Totevision LCD-1510V Manual de usuario

Totevision

Totevision LCD-410 Manual de usuario

Totevision

Totevision LCD-1901HD Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación