Tinkerine Studio Ditto Pro Manual de usuario
USER MANUAL
Congratulations on becoming the owner
of a brand new Ditto™Pro 3D printer.
This user manual will assist you with the
unboxing and initial setup of the printer,
and provide guidance on general
maintenance and troubleshooting
procedures. So welcome to the
Tinkerine family, we hope you will enjoy
using the Ditto™Pro as much as we do.
Welcome.
Table of Contents
1
SAFETY WARNINGS
2
WARRANTY
3
SPECIFICATIONS
4
PRINTER OVERVIEW
5
UNBOXING
6
FILAMENT INSTALLATION
8
PRINT BED INSTALLATION
9
PRINT BED CALIBRATION AND STARTING A PRINT
10
TINKERINE SUITE SOFTWARE INSTALLATION
12
BED LEVELING GUIDE
11
IMPORTING AND PRINTING A MODEL
13
SLICING SETTINGS
14
EXPORTING A FILE
15
MODEL ROTATION
16
MODEL SCALING
18
MEASURING FILAMENT DIAMETER
23
UPDATING PRINTER FIRMWARE
24
TROUBLESHOOTING
26
PRINTER CARE MAINTENANCE
29
HOTEND REPLACEMENT
33
GLOSSARY
42
SLICING SETTINGS EXPLAINED
20
Safety Warnings
The Ditto™Pro 3D printer prints with molten plastic which emits a slight odor
during operation. Setup the Ditto™Pro 3D printer in a well-ventilated environment.
VENTILATION
The Ditto™Pro contains delicate electronic components and sensors. Handle with care.
The Ditto™Pro 3D printer is not user serviceable.
FRAGILE
2
The Ditto™Pro 3D printer hotend heats up to high temperatures during operation.
Allow the hotend to properly cool down before reaching in your hand.
HOT SURFACE
Hot Surface.
Allow to cool before servicing.
The Ditto™Pro 3D printer contains multiple moving parts that can cause injuries.
Do not reach inside the Ditto™Pro 3D printer during operation.
MOVING PARTS
Pinch Point.
Keep hands and fingers clear.
There is a risk of shock. Contact a certied technician to service your Ditto™Pro 3D printer.
In case of emergency disconnect the power cable from the socket.
SHOCK
Electric Shock Hazard.
This equipment is to be serviced
by trained personnel only.
Do not look directly at any operating LED’s.
BRIGHT LIGHTS
Warranty
3
STANDARD WARRANTY
Tinkerine Studios, LTD warrants the equipment and accessories comprising the Ditto™Pro 3D Printer will be free from
defects in material and workmanship for one (1) year from the date of customer purchase. Original serial number must
appear on product. Removal of serial numbers will void this warranty and any equipment and accessories that have been
altered or modied in any way and are not as originally purchased will void this warranty.
Tinkerine will at its option repair, replace or refund the purchase price of any accessories, supplies or equipment found to be
defective under this warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE.
In the event of breach of this expressed warranty, or any other warranty, whether expressed or implied, Tinkerine liability
shall be limited to the remedy provided by the preceding paragraph. IN NO EVENT WILL TINKERINE BE LIABLE FOR ANY
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, NOR WILL TINKERINE EVER BE LIABLE FOR BREACH OF
WARRANTY, WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF THE
MERCHANTABILITY OR FITNESS, IN AN AMOUNT GREATER THAN THE PURCHASE PRICE OF THE PRODUCTS
DESCRIBED BY THIS EXPRESSED WARRANTY. No agent, distributor, salesperson, wholesaler or retail dealer has authority
to bind Tinkerine to any other afrmation, representation or warranty concerning these goods.
TECHNICAL SUPPORT
For technical assistance, please contact the Tinkerine Technical Support team:
• Phone: 1-604-288-8778
DISCLAIMER
While every precaution has been taken in preparation of this document, Tinkerine assumes no liability to any party for any
loss or damage caused by errors or omissions or by statements resulting from negligence, accident, or any other cause.
Tinkerine further assumes no liability arising out of the application or use of any product or system described, herein; nor
any liability for incidental or consequential damages arising from the use of this document. Tinkerine disclaims all warranties
of merchantability or tness for a particular purpose. Tinkerine reserves the right to make changes without further notice to
any product or system herein to improve reliability, function, or design.
Safety Warnings
4
Dimensions 37 x 39 x 43.6 cm (14.6 x 15.4 x 17.2 in)
Weight 10 kg (22.0 lb)
Physical
Build Volume 22 x 16.5 x 22 cm (8.7 x 6.5 x 8.7 in)
Filament Diameter 1.75 mm
Layer Resolution 50-300 microns (0.05-0.3 mm)
Material PLA
Nozzle Diameter 0.35mm
Technology Fused Filament Fabrication (FFF)
Printing
File Type STL, OBJ
Os Compatibility Windows, Mac
Software Tinkerine Suite
Software
Connectivity USB (rmware), SD Card (printing)
Consumption ~15W (idle), ~70W (operational)
Electronics RAMPS 1.4, AT mega 2560,
A4988 Stepper Drivers,
Power Input AC 100-240VAC, 50-60 Hz, 1.0A
Power Output DC 12V, 15A
Operational Temp 5 C ~ 35 C
Electrical
Body Aluminum composite
Build Platform Glass (adhesive material required)
Linear Motion Linear bearings, bronze bushings
Motor 1.8° step angle, 1/16 micro-stepping
Mechanical
Ditto™Pro 3D Printer
Printer Overview
5
Print Cooling Fan
Print Bed
Hotend
Filament Guide Tube
SD Card Reader Control Dial
Control Menu
Spool Holder
Power Switch
Power Socket
USB Port
BACK
FRONT
Unboxing
6
Peel back aps and remove compartment lid.1
2Remove printer accessories from compartment.
Ditto™Pro Printer Filament Spool
Remove foam bracket and remove the printer and lament.
3
Place the printer on a rm at surface.
Requires accessible power outlet.
5
Remove the printer and lament from the box.
4
SD Card
USB Cable
Power Cable
Print Bed Clips x4
Glass Print Bed
Hex Wrench
Unboxing
Powering On
7
Insert the female end into the power socket located on the back of the printer.2
Make sure the power switch on the printer is in the Off position ( O ).
1
Insert the male end of the power cord into an electrical socket.
3
Turn on the printer by ipping the power switch to the On position ( I ).
4
Use extra caution when cutting off the zip ties to
prevent damage to the motion belts or wires.
Using a pair of scissors, cut away the two zip ties that are securing the extruder in place, and remove
the printer certication card.
6
DPR1234567
John Doe
Filament Installation
8
If you are having trouble feeding the lament into
the lament guide tube, pull the lament out and
trim the tip of the lament with a pair of scissors.
Thread the lament through the guide tube and insert
it into the extruder. You’ll need to push down on the
tensioner button to open up a gap.
Once the lament is inserted all the way down into the
hotend, insert the guide tube into the top of the
extruder cap.
Extend the lament guide tube from the retracted position.
1
Remove the lament spool from
the packaging and place it on
the spool holder.
2
Take the end of the lament from the spool and
insert it into the guide tube.
3
54
Otros manuales para Ditto Pro
4
Tabla de contenidos
Otros manuales de Impresora 3D de Tinkerine Studio
Tinkerine Studio
Tinkerine Studio Ditto Pro Manual de usuario
Tinkerine Studio
Tinkerine Studio Ditto Pro Manual de usuario
Tinkerine Studio
Tinkerine Studio Ditto Pro Manual de lista de piezas
Tinkerine Studio
Tinkerine Studio DittoPro-R Manual de lista de piezas
Tinkerine Studio
Tinkerine Studio LITTO Manual de usuario
Tinkerine Studio
Tinkerine Studio Ditto Manual de usuario
Tinkerine Studio
Tinkerine Studio Ditto Pro Manual de usuario
