TierTime UP300D Manual de usuario

Tiertime UP300D

User Manual

www.tiertime.com

Index

☼Marked topics are essential contents that highly recommended for first time users.

Tiertime UP300D.................................................................................................................... 1

User Manual............................................................................................................................ 1

1. Safety and Printing Environment.........................................................................................4

1.1 Safety Precautions........................................................................................................................4

1.2 Printing Environment..................................................................................................................5

1.3 One Year Warr anty..................................................................................................................... 5

1.4 Compliance................................................................................................................................... 5

2. Unboxing............................................................................................................................... 6

2.1 Unboxing the UP300D................................................................................................................. 6

2.2 What’s in the box......................................................................................................................... 7

3.1 Main Par ts of UP300D.................................................................................................................8

4. Printer Installation................................................................................................................ 9

4.1 Install the Pr int Board.................................................................................................................9

4.2. Install Software UP Studio 3.0................................................................................................. 10

4.3 Update the Touchscreen Firmwar e.......................................................................................... 10

5. Prepare UP300D for Printing.............................................................................................11

5.1 USB Connection......................................................................................................................... 11

5.2 Auto Calibration........................................................................................................................ 12

Auto Calibr ation from Touchscreen.............................................................................................. 12

5.3 Load Filament............................................................................................................................ 13

6. First Print............................................................................................................................ 16

6.1. Slicing......................................................................................................................................... 16

6.2 Connect and Send Pr int Job to Printer....................................................................................20

6.3 Remove the Printed model........................................................................................................ 21

7. Printer Calibration.............................................................................................................. 22

7.1 Nozzle Height Measur ement..................................................................................................... 22

7.1 Set Nozzle Height through Touchscreen, please r efer to page xxx........................................23

7.2 Setup Nozzle Height Value thr ough Wand (computer hosted)..............................................23

7.3 Matr ix Leveling (9-Point Compensation)................................................................................ 25

7.3.1 Auto Matr ix Leveling through touchscreen, r efer to page xxxx.........................................26

7.3.2 Auto Matrix Leveling thr ough Wand (computer hosted)................................................... 26

7.4 Manual calibr ation.....................................................................................................................27

7.6 Dimensional Calibration............................................................................................................32

7. Wand - the Printer Hosting Software................................................................................. 53

7.1 Wand Inter face ......................................................................................................................... 53

7.2. Printer Calibr ation................................................................................................................... 54

7.4 Ethernet Connection.................................................................................................................. 55

7.6 Wi-Fi Connection....................................................................................................................... 56

8. Touchscreen Introduction...................................................................................................58

8.1 Printer Status Bar ...................................................................................................................... 58

5.2 Mater ial.......................................................................................................................................60

8.2 Print.............................................................................................................................................62

8.3 Calibrate..................................................................................................................................... 65

8.4 Information.................................................................................................................................66

8.5 Config.......................................................................................................................................... 67

8.5 Network Connection.................................................................................................................. 68

8.6 Wi-Fi Networ k Connection and Settings:................................................................................70

9. Initialize.........................................................................................................................................72

10. Print Boards.......................................................................................................................73

10.1 Perf Glass Board...................................................................................................................... 73

10.2 Flex Glass Board...................................................................................................................... 73

10.3 Glass Surface............................................................................................................................ 73

11. Extruders........................................................................................................................... 74

11.1 Convergence Dual Extr uder................................................................................................... 74

11.2 Single Extr usion Print Heads..................................................................................................75

12. Maintenance...................................................................................................................... 76

8.1 Clean the Waste Tray................................................................................................................ 78

8.2 Dual Filtration System...............................................................................................................78

12. Specification...................................................................................................................... 80

13. Customer Service...............................................................................................................81

1. Safety and Printing Environment

1.1 Safety Precautions

1. The UP300D 3D printer requires the power adapter provided by the original

manufacturer, otherwise the machine could be damaged or even cause fire. Keep

the power adapter away from water and out of high temperature environments.

2.During printing, the temperature of the nozzle of the printer could reach 300°C and

the temperature of the print platform could be over 100°C. Do not touch these parts

with your bare hands when the printer is in the operation mode, not even with the

heat resistant gloves included in the accessories, as the temperature could damage

the gloves and injure your hands.

3. During printing, the print head and other mechanical parts move at high speed.

Touching these parts while they are moving could cause injuries.

4. Wear goggles when removing the supporting material from models or detaching

models from the build plates.

5. When printing with plastic filaments, the process could generate slight and, for

some people, annoying odor. It is recommended to run the printer in a well ventilated

environment. We also suggest to keep the printer in an environment with a stable

temperature as unwanted cooling could cause adverse effects to the print quality.

6. When using the “Extrude” function, make sure there is enough space between the

print head nozzle and the build platform. 50mm is recommended, otherwise the

nozzle could be blocked.

7. Fasten moving parts. Tie back loose hair, secure loose clothing and keep all

printer doors closed during operation.

8. Do not leave the printer unattended during operation. Watch to make sure the first

a few layers adhere correctly.

9. Adult Supervision: Adult supervision is required in the presence of children. Small

printed parts are a choking hazard, and always keep sharp tools away from children.

1.2 Printing Environment

As the slight odor could be generated during printing, keep the printer in a well

ventilated environment. The UP300D's ideal working temperature is between 15°C

and 30°C with a relative humidity between 20–50%. Printing at temperatures out of

this range could cause adverse effects to the printing process and print quality.

1.3 One Year Warranty

Tiertime and its authorized resellers warrant to the original purchaser that this

product is free from defects in material and workmanship. Tiertime or its resellers will

for one year, at its option, repair or replace at no charge for parts and labor from the

date you purchased the product from Tiertime or a reseller. Print heads, Nozzles and

Print Boards are warranted for ninety (90) days.

• Tiertime reserves the right to determine the validity of all warranty claims.

• Warranty is voided if the product serial number has been altered or removed.

• Warranty is voided if the product has been misused or damaged or if evidence is

present that the product was altered, modified, or serviced by unauthorized service

people.

For the detailed Warranty and Service Level Agreement, please visit our website

https://www.tiertime.com.

1.4 Compliance

FCC

RoHS

2. Unboxing

2.1 Unboxing the UP300D

1. Cut open the tape on the top of the cardboard box, and open the box from the top.

2. Take out the two boards on the top foam, and remove the top foam.

3. Remove the plastic cover and the square shaped foam wrapping around the

machine.

4. Lift the printer out of the cardboard box using two handles on both sides of the

printer, and place it on a flat surface.

5. Open the Top Lid and remove all the tights and foams inside the printer. There are

six tights in the machine.

6. Open the Front Door, and take out the two foams and two extruders beneath the

build platform. As figures show below:

7. Take out the roll of filament, the accessory box and the power cord at the bottom

of the cardboard box.

8. Put all the foams back to the box, and keep the box for the future use.

2.2 What’s in the box

The Convergence dual extruder is installed on the UP300D.

1. Accessory box

One ABS Type single extruder

One USB Cable

One Pliers

One Scarper

One Nozzle Wrench: 8mm

One Nozzle Wrench: 10mm

One Pair of Gloves

One SD Card Reader

One SD Card

One Calibration Card

One Nozzle Height Detector

Two PTFE Tube: Shorter one for PLA Extruder; Longer one for TPU Extruder

Three Allen Keys: 2mm, 2.5mm, 3mm

Three Nozzles: 0.2mm, 0.4mm, 0.6mm

2. In the UP300DD box

One roll of 500g PLA Filament

One roll of 500g Water Soluble Support Filament

One Flex Glass Board

One Perf Glass Board

One Power Adapter

One Power Cord

Notice: All accessories may subject to change without prior notice. If anything is

missing, please contact your local distributor, or Tiertime’s global technical support

center, which can be reached via [email protected].Introduction

3.1 Main Parts of UP300D

1. Dual Filter

2. Build Platform

3. Waste Tray

4. Front Door

5. Touchscreen

6. Front USB Port

7. Top Lid

8. Right Side Handle

9. Filament Bay

10. Power Switch

11. Ethernet Socket

12. USB Port

13. Power Socket

Y- Axis

X-Axis

Z-Axis

Build Platform

Extruder Mount

4. Printer Installation

4.1 Install the Print Board

1. Find the “perforated print board”.

2. Open the front door.

3. Slide the board onto the build platform and make sure to push the board all the

way to the back.

4. Close the front door.

4.4 Connect the Power Cable

1. Plug in the power on the back of the UP300D

2. Plug the other end of the cable into a wall outlet.

4.2. Install Software UP Studio 3.0

To operate the UP300D, you need to install the UP Studio 3.0 software on your

computer. Although UP Studio 2.X can also work with UP300D, it does not support

dual extrusion function and is obsoleted.

You can download the installation files of UP studio software from the following url:

https://www.tiertime.com/downloads/software

System Requirements:

Supported Operating Systems:

Windows 7 (SP1) or higher (64 bit only)

Mac OS 10.10 or higher

Hardware requirements:

Open GL 2.0

At least 4GB of RAM

Installation

Make sure you download the correct version of software based on your computer’s

configuration.

4.3 Update the Touchscreen Firmware

We regularly update the Tiertime 3D printer’s touchscreen program. It is important to

make sure your UP300D’s touchscreen system is up-to-date before the first use and

pay attention to the upgrade announcement for touchscreen system in the future.

1. Download the UP300D Touchscreen Upgrade Program from

https://www.tiertime.com/touchscreen-upgrade-program/

2. Save the file to the root directory of the USB drive which comes with the UP300D,

and make sure the file is named as “UP300D_x.x.x_update.tt” (Case sensitive), x.x.x

being the version number.

3. Insert the USB drive to the USB socket under the touch screen, and turn on the

printer. Wait until the printer is fully ready, go to Information Page, and press the

“Upgrade” button. Follow the instructions on the touchscreen afterwards.

4. Keep the USB drive handy for the future use.

Otros manuales para UP300D

Tabla de contenidos

Otros manuales de Impresora 3D de TierTime

TierTime

TierTime UP BOX Manual de usuario

TierTime

TierTime UP mini Manual de usuario

TierTime

TierTime UP Plus 2 Manual de usuario

TierTime

TierTime UP BOX+ Manual de usuario

TierTime

TierTime UP BOX Manual de instalación y operación

TierTime

TierTime UP Mini 2 ES Manual de usuario

TierTime

TierTime UP600 Manual de usuario

TierTime

TierTime UP mini 3 Manual de usuario

TierTime

TierTime UP BOX Manual de usuario

TierTime

TierTime UP mini 2 Guía de configuración

TierTime

TierTime Filament Dryer PRO Manual de usuario

TierTime

TierTime UP300D Manual de usuario

TierTime

TierTime UP300 Manual de usuario

TierTime

TierTime UP300 Manual de usuario

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario