Texas Instruments OMAP35x Manual de usuario

May 22, 2009

OMAP35x EVM

Getting Started Guide

V02.01.01

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue any

product or service without notice. Customers should obtain the latest relevant information before placing orders and

should verify that such information is current and complete. All products are sold subject to TI's terms and conditions

of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance

with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by government requirements, testing of all parameters of each

product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their

products and applications using TI components. To minimize the risks associated with customer products and

applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

which TI products or services are used. Information published by TI regarding third-party products or services does

not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such

information may require a license from a third party under the patents or other intellectual property of the third party,

or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information

with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered

documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and is an

unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products

Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Security www.ti.com/security

Low Power

Wireless

www.ti.com/lpw Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,

DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI

to be a finished end-product fit for general consumer use. Persons handling the

product(s) must have electronics training and observe good engineering practice

standards. As such, the goods being provided are not intended to be complete in terms

of required design-, marketing-, and/or manufacturing-related protective considerations,

including product safety and environmental measures typically found in end products

that incorporate such semiconductor components or circuit boards. This evaluation

board/kit does not fall within the scope of the European Union directives regarding

electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC,

CE or UL, and therefore may not meet the technical requirements of these directives or

other related directives.

Should this evaluation board/kit not meet the specifications indicated in the User's

Guide, the board/kit may be returned within 30 days from the date of delivery for a full

refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY

SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the

goods. Further, the user indemnifies TI from all claims arising from the handling or use

of the goods. Due to the open construction of the product, it is the user's responsibility

to take any and all appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER

PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our

arrangement with the user is not exclusive.

TI assumes no liability for applications assistance, customer product design,

software performance, or infringement of patents or services described herein.

Please read the User's Guide and, specifically, the Warnings and Restrictions notice in

the User's Guide prior to handling the product. This notice contains important safety

information about temperatures and voltages. For additional information on TI's

environmental and/or safety programs, please contact the TI application engineer or

visit www.ti.com/esh.

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

No license is granted under any patent right or other intellectual property right of TI

covering or relating to any machine, process, or combination in which such TI products

or services might be or are used.

Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265

FCC Warning

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,

DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI

to be a finished end-product fit for general consumer use. It generates, uses, and can

radiate radio frequency energy and has not been tested for compliance with the limits of

computing devices pursuant to part 15 of FCC rules, which are designed to provide

reasonable protection against radio frequency interference. Operation of this equipment

in other environments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may be

required to correct this interference.

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

Preface

About This Guide

The OMAP35x EVM is an evaluation platform that showcases the OMAP

architecture and lets users evaluate the power and performance of OMAP as

a flexible general purpose platform.

This guide gives you overview information about the board and the software

provided with the board. It is intended to be used as an introductory

document for the EVM. Other documents provide more in-depth information.

See the EVM documentation section of the release notes for a complete list

of documents that have been included with the product.

Notational Conventions

This document uses the following conventions:

Program listings, program examples, and interactive displays are shown in a mono-spaced

font. Examples use bold for emphasis, and interactive displays use bold to distinguish commands that

you enter from items that the system displays (such as prompts, command output, error messages, etc.).

Square brackets ( [ and ] ) identify an optional parameter. If you use an optional parameter, you

specify the information within the brackets. Unless the square brackets are in a bold typeface, do not

enter the brackets themselves.

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

Trademarks

The Texas Instruments logo and Texas Instruments are registered trademarks of Texas

Instruments. Trademarks of Texas Instruments include: TI, OMAP, the OMAP logo, XDS, Code

Composer, Code Composer Studio, Probe Point, Code Explorer, DSP/BIOS, RTDX, Online DSP

Lab, OMAP, TMS320, TMS320C54x, TMS320C55x, TMS320C62x, TMS320C64x, TMS320C67x,

TMS320C5000, and TMS320C6000.

MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Linux is a registered trademark of Linus Torvalds.

CodeSourcery and CodeSourcery’s Sourcery G++ are trademarks or registered trademarks of

CodeSourcery, Inc.

Solaris, SunOS, and Java are trademarks or registered trademarks of Sun Microsystems, Inc.

All other brand, product names, and service names are trademarks or registered trademarks of their

respective companies or organizations.

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

Revision History:

Rev No. Changes Date

1.0 Beta Release March 15, 2008

1.1

Addition of Micron POP Support,

Replace SignXloaderTool w/ signGP,

Updates for new Serial Download Utility,

Move Release notes to separate document,

Addition of new libraries (Freetype, jpeg, png, zlib)

May 13, 2008

1.2 Updated the document for review comments

Added “Booting the New Linux Kernel” Section July 10, 2008

1.3 Updated for PSP LSP Release v1.0.2 Nov 13, 2008

1.4 Updated for PSP LSP Release v02.01.00 Mar 17, 2009

1.5 Updated the directory tree Apr 22, 2009

1.6 Updated for the 02.01.01 release May 12,2009

1.7 Updated nfs bootargs May 22,2009

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

Table of contents

Overview...............................................................................................................................................10

1.1

What’s in the kit?......................................................................................................................10

1.2

Identifying Board Variations .....................................................................................................11

1.3

What’s on the board? ...............................................................................................................14

1.4

OMAP3503 SDK Contents.......................................................................................................15

1.5

What’s next? ............................................................................................................................18

1.6

Updates & Further information.................................................................................................19

EVM Hardware Setup...........................................................................................................................20

2.1

Main Board SW4......................................................................................................................21

2.2

Processor Module SW1 ...........................................................................................................22

2.3

J8..............................................................................................................................................22

2.4

UART1 .....................................................................................................................................22

2.5

Ethernet....................................................................................................................................22

2.6

Audio Out .................................................................................................................................22

2.7

Audio In ....................................................................................................................................23

2.8

Power Selection Switch ...........................................................................................................23

2.9

Power Cable.............................................................................................................................23

Running the Demo Software ................................................................................................................24

3.1

Setup Terminal Program ..........................................................................................................25

3.1.1

HyperTerminal Setup .............................................................................................................25

3.1.2

TeraTerm Setup.....................................................................................................................25

3.1.3

Minicom Setup .......................................................................................................................25

3.2

Running the Basic Demo .........................................................................................................27

3.3

Performing an Audio Record and Playback.............................................................................27

3.4

Performing a Touch Screen Test .............................................................................................27

Software Setup .....................................................................................................................................28

4.1

Requirements...........................................................................................................................28

4.2

Installing the Software..............................................................................................................28

4.3

Installing the Toolchain ............................................................................................................29

4.3.1

Setting up the Toolchain ........................................................................................................31

Updating the Flash Image ....................................................................................................................32

5.1

Requirements...........................................................................................................................32

5.2

Preparing to Install ...................................................................................................................32

5.3

Downloading U-boot via the UART Downloader......................................................................33

5.4

Using U-boot to update the Flash Memory ..............................................................................35

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

5.4.1

Setup the TFTP Server..........................................................................................................35

5.4.2

Running the Re-flash Procedure ...........................................................................................36

Rebuilding the Software .......................................................................................................................38

6.1

Rebuilding U-boot ....................................................................................................................38

6.2

Rebuilding the Linux Kernel .....................................................................................................39

6.3

Rebuilding the Initial NAND X-loader.......................................................................................39

6.4

Rebuilding the Target-side UART Loader................................................................................40

6.5

Rebuilding the NFS Image.......................................................................................................40

6.6

Rebuilding the Full Ramdisk Image .........................................................................................41

6.7

Rebuilding the JFFS2 File-System Image ...............................................................................42

EVM Operation.....................................................................................................................................43

7.1

Using Telnet .............................................................................................................................43

7.2

Booting the New Linux Kernel..................................................................................................43

7.2.1

Checking the TFTP server setup in the Linux development PC............................................43

7.2.2

Using TFTP to boot the New Linux Kernel ............................................................................44

7.2.3

Flashing the New Linux Kernel ..............................................................................................44

7.3

Changing Options in U-boot.....................................................................................................45

7.4

Exporting an NFS Root File-System ........................................................................................46

Document OMAP35x EVM Getting Started Guide V02.01.01 Rev 1.7

Document Number Date May 22 2009

1 Overview

This Chapter introduces the OMAP35x EVM and OMAP3503 Software Development Kit.

1.1 What’s in the kit?

The kit comes with the following hardware pieces:

•OMAP35x™ Evaluation Module Target Board

oIncludes dual-mode touch screen LCD display and stylus

•USB cable

•Serial Cable

•Universal Power supply and power cords

The kit comes with the following printed documentation:

•OMAP35x™ Evaluation Module Beta Installation and Registration Instructions

•OMAP3503 EVM Setup Guide

•Mistral OMAP3503 EVM Hardware User’s Guide

•OMAP3503 EVM Getting Started Guide (this document)

The kit comes with the following software CDs:

•OMAP3503 Software Development Kit (SDK) 1 CD-ROM

•Sourcery G++™ evaluation tools from CodeSourcery 1 CD-ROM

Installation and use of the Software Development Kit is described in this document. This document

assumes the use of the LITE version of CodeSourcery tools. This version is an unrestricted command

line toolchain available free of charge from the CodeSourcery web site (see section 4.3 “Installing the

Toolchain”).

Alternatively, a full featured IDE 30 Day time limited version of Sourcery G++ is provided. To install and

use the evaluation version of CodeSourcery Sourcery G++ product, please see the information available

on the provided CD.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments ADS64XX EVM Manual de usuario

Texas Instruments

Texas Instruments MCF8316A Manual de usuario

Texas Instruments

Texas Instruments ADS1285EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments MSP432E411Y-BGAEVM Manual de usuario

Texas Instruments

Texas Instruments TLV3601EVM Manual de usuario

Texas Instruments

Texas Instruments DRV425EVM Manual de usuario

Texas Instruments

Texas Instruments ADS131E08 Manual de usuario

Texas Instruments

Texas Instruments DAC7568EVM Manual de usuario

Texas Instruments

Texas Instruments MSP430FR57 Series Manual de usuario

Texas Instruments

Texas Instruments ADS9120EVM-PDK Manual de usuario

Texas Instruments

Texas Instruments UCC14131EVM-070 Manual de usuario

Texas Instruments

Texas Instruments 2N7001TEVM Manual de usuario

Texas Instruments

Texas Instruments BoosterPack BOOSTXL-IOLINKM-8 EVM Manual de usuario

Texas Instruments

Texas Instruments TIDA-050026-23881 Guía

Texas Instruments

Texas Instruments DRV8889-Q1EVM Manual de usuario

Texas Instruments

Texas Instruments TPS61165EVM-283 Manual de usuario

Texas Instruments

Texas Instruments BQ25173-Q1 Manual de usuario

Texas Instruments

Texas Instruments BOOST-LDC3114EVM Manual de usuario

Texas Instruments

Texas Instruments LDC1000 Manual de usuario

Texas Instruments

Texas Instruments TPS1H000-Q1 EVM Manual de usuario

Texas Instruments

Texas Instruments TPA2025D1 Manual de usuario

Texas Instruments

Texas Instruments DAC7811EVM Manual de usuario

Texas Instruments

Texas Instruments TPS25740EVM-741 Manual de usuario

Texas Instruments

Texas Instruments ADC366 EVM Series Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario