Texas Instruments TMDX654IDKEVM Manual de usuario

AM65x/DRA80xM

Industrial Development Kit

Manufactured by Mistral Solutions Pvt. LTD. • www.mistralsolutions.com

Welcome to the AM65x/DRA80xM Industrial Development Kit (IDK) Quick Start Guide. This guide is

designed to help you through the initial setup of the board. This IDK allows you to experience industrial

applications which showcase the AM65x/DRA80xM Quad-Core Cortex®–A53, Dual-Core Cortex-R5F,

gigabit PRU-ICSS (real-time industrial communications subsystem), and more. The IDK contains

the following:

Hardware

• AM6548/DRA804M Quad Core Cortex®-A53

function equivalent processor

• IDK Application card

• 2-lane PCIe SerDes card

• 4GB DDR4 with ECC

• On board 16 GB eMMC

• On board 512Mb OSPI Flash

Printed Documents

• AM65x/DRA80xM IDK Quick Start Guide

(this document)

Miscellaneous

• 1 SD card

• 1 USB 2.0 cable

• 1 Ethernet cable

Not included in box

The following hardware is not included in the box and must be procured separately:

1. Power supply. Use one of the following power supply options for powering up the IDK. Pick a

power supply with all the applicable regional product regulatory/safety certication requirements such

as UL, CSA, VDE, CCC, PSE, etc.

The DIN connector power supply is recommended to provide enough power for applications that make

use of the PCIe interface.

2. 1280 x 800 LCD Display Accessory Kit. The LCD is optional and can be purchased separately

using TI part number TMDSLCD1EVM.

Connector Speciﬁcations Examples

Power DIN, 4 Pin +24VDC, 5A Output (Max) CUI Inc. SDI120-24-U-P51

Barrel Plug, 2.5mm I.D. x

5.5mm O.D. x 9.5mm

+24VDC, positive center, 2.71A

Output (Max)

CUI Inc. SDI65-24-UD-P6

Optional: If you have purchased the LCD Accessory

Kit, assemble the LCD onto the IDK following the

instructions included with the LCD Accessory Kit.

Connect a power supply (not included) to the DIN

connector or power jack on the IDK and plug it in to

an AC power source. Do not connect both, only one

power supply must be connected.

Insert the SD card into the IDK. Alternatively, download

and install the latest Processor SDK-RTOS from

http://www.ti.com/tool/processor-sdk-am65x, create

a bootable SD card and insert it into the IDK.

Connect the supplied USB debug cable to the USB

connector labeled “UART” on the board. Connect the

other end to your PC. Then open a serial console on

your PC such as Teraterm. Please note that you may

need to download and install an FTDI driver from

http://www.ftdichip.com/FTDrivers.htm.

Default setup (TI-RTOS boot from SD card)

For more information on AM65x processors, including:

•User Guide •Software •How To •Design Files

Please visit www.ti.com/am65x

For support questions, please contact: [email protected] or www.ti.com/e2e

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to

obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software

performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Trademarks in this issue: The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.

Printed in U.S.A.

SPRW324b

Note: This IDK is designed for optional use with a removable

CR2032 UL recognized lithium battery (not supplied). Always

use the CR2032VP Energizer 3V Lithium coin cell battery or

similar CR2032 UL recognized battery with Nominal Voltage

3.0 Volts, Capacity 235mAh

TI Processor SDK software development guides are available at:

Linux: www.ti.com/processor_sdk_linux

TI-RTOS: www.ti.com/processor_sdk_rtos

Android: www.ti.com/processor_sdk_android

7Note that this IDK comes with a coin battery holder.

A coin battery is not necessary for normal operation

of the IDK.

5 6

Optional: If you plan to use Code Composer Studio

(CCS) IDE to control the IDK, you must use another

USB cable connected to the USB connector labeled

“XDS110_USB” on the board. Refer to

http://software-dl.ti.com/processor-sdk-rtos/esd/docs/

latest/rtos/How_to_Guides.html#host for details about

CCS setup.

Turn on the IDK by sliding the toggle switch to the right.

To turn off, slide the toggle switch the left.

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you

permission to use these resources only for development of an application that uses the TI products described in the resource. Other

reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third

party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,

damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on

ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable

warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Microcontrolador de Texas Instruments

Texas Instruments

Texas Instruments MSP430F67621 Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de programación

Texas Instruments

Texas Instruments REF70EVM Manual de usuario

Texas Instruments

Texas Instruments TPS65941120-Q1 Manual de usuario

Texas Instruments

Texas Instruments Hercules RM57L Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Texas Instruments

Texas Instruments CC2510 Manual de programación

Texas Instruments

Texas Instruments Chipcon Products CC1110DK Manual de usuario

Texas Instruments

Texas Instruments LP-MSPM0L1306 Manual de usuario

Texas Instruments

Texas Instruments Piccolo F280049 Manual de usuario

Texas Instruments

Texas Instruments TMS320 2806 Series Manual del producto

Texas Instruments

Texas Instruments SWRU351 Manual de usuario

Texas Instruments

Texas Instruments TLC2543 Manual de usuario

Texas Instruments

Texas Instruments TM4C1294NCPDT Manual de usuario

Texas Instruments

Texas Instruments MSP430F643 Series Manual de usuario

Texas Instruments

Texas Instruments TMS320C6000 DSP Guía

Texas Instruments

Texas Instruments eZ430-Chronos Manual de usuario

Texas Instruments

Texas Instruments MSP430F6735 Manual de usuario

Texas Instruments

Texas Instruments ADS1298RECG-FE Manual de usuario

Texas Instruments

Texas Instruments CC2430ZDK Manual de usuario

Texas Instruments

Texas Instruments RM46L852 Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

Texas Instruments

Texas Instruments MSP430F6745 Manual de usuario

Texas Instruments

Texas Instruments CC3100 SimpleLink Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario

Silicon Laboratories

Silicon Laboratories C8051F800 Manual de usuario

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manual de usuario

Mikroe

Mikroe click Proximity 2 Manual de usuario