Texas Instruments TMS570 Manual de usuario

The platform bar and Code Composer Studio are trademarks of Texas Instruments. All other trademarks are the

Quick Start Guide: TMS570

Microcontroller Development Kit

TMS570 Microcontroller Development Kit Features:

- 337p BGA TMS570LS20216 MCU

- CPU Card and I/O Base Board

- On Board USB XDS100v2 JTAG

- Ambient Light & Temp Sensors

- 3 CAN Transceivers

- 2 FlexRay Transceivers

- 1 LIN Tranceiver

- On Board SCI to USB Serial

- Color Touch Screen LCD

- NHET and GIO LEDs

- 1 RS485 Transceiver

- Multiple Sensor Interfaces

Board Conﬁdence Test & Demo Features:

- Temperature and Ambient Light Sensor Bar Graph Demo

- SD-Card ID and Size Identiﬁcation

- Memory Test for on board RAM, FRAM and EEPROM

- Input Sensor Voltage Display

Temperature and Ambient Light Demo

The full MDK user guide may be viewed at:

http://www.keil.com/support/man/docs/mcbtms570

User Interface

The TMS570 Microcontroller Development Kit (MDK) is ideal for evaluating and starting development with the TMS570 family of

devices. It is comprised of a CPU card and an I/O base board. The kit contains on board XDS100v2 JTAG emulation along with

access to several key communication and peripheral interfaces.

Board Conﬁdence Test & Demo: The TMS570 Microcontroller Development Kit (MDK) Conﬁdence Test &

Demo Application allows veriﬁcation most functions of the CPU and I/O board’s functionality. It also provides a

demonstration of some of the kit’s functionality. This application comes pre-programmed into the TMS570 ﬂash

memory and will automatically run when the +12V DC power supply is connected to the kit. The demonstration

is controlled using the menus on the board’s LCD. The application is included on the MDK DVD and can re-

programmed at a later time.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

337p (BGA)

TMS570LS20216 MCU

Light Temperature

USB mini-B: XDS100v2

JTAG SCI to USB

+12V DC Power Input

MIPI

DCAN3

DCAN2

DCAN1

LIN2

20 pin JTAG

RS485

FlexRay

LCD Touch Screen

Micro SD

Sensor Interface

GIO & NHET LEDs

Pressure Sensor

Medical

Push Buttons

Relay Solenoid Drivers

Quick Start Guide:

TMS570 Microcontroller Development Kit Demos

Install the TMS570 MCU Development Kit Software. A full install is required to ensure that all demo

features of the MCU Development Kit are available.

Plug in the +12V power supply into the MDK CPU card and connect the USB mini-B cable

between the MDK CPU card and a USB port on the PC. The PC will recognize the MDK board

as an XDS100v2 JTAG Emulator and a USB Serial port. NOTE: The board conﬁdence test

comes pre-programmed in the TMS570 ﬂash memory and will be overwritten by the Safety

MCU Demo program.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

Start the TMS570 Safety Demo Software. In Windows XP the software will be available in

‘Start->All Programs->Texas Instruments->TMS570 Safety MCU Demos.

Launch any of the TMS570 Demos from the launch pad. Internet access is required to view

the device documentation. Code Composer Studio must be installed to view the microcontroller

source code.

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not

considered by TI to be a ﬁnished end product ﬁt for general consumer use. Persons handling the product(s) must have electronics training and

observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-,

marketing-, and/or manufacturing related protective considerations, including product safety and environmental measures typically found in end

products that incorporate such semiconductor components or circuit boards.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemniﬁes TI from all claims arising

from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate

precautions with regard to electrostatic discharge. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL

BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. TI assumes no liability for applications

assistance, customer product design, software performance, or infringement of patents or services described herein.

USB mini-B

+12V

Otros manuales de Microcontrolador de Texas Instruments

Texas Instruments

Texas Instruments Delfino TMS320F28377D controlCARD Manual técnico

Texas Instruments

Texas Instruments SimpleLink CC2650 Manual de usuario

Texas Instruments

Texas Instruments SimpleLink MSP432P4111 Manual de usuario

Texas Instruments

Texas Instruments CC2520EM Manual de usuario

Texas Instruments

Texas Instruments TMS320F28004 Series Manual de usuario

Texas Instruments

Texas Instruments TAS5132DDV6EVM Manual de usuario

Texas Instruments

Texas Instruments TMS570LS Manual de usuario

Texas Instruments

Texas Instruments MSP430F6726 Manual de usuario

Texas Instruments

Texas Instruments TPS65910 EVM Manual de usuario

Texas Instruments

Texas Instruments SimpleLink CC3200 Wi-Fi Manual

Texas Instruments

Texas Instruments Errata MSP430FG6426 Manual de usuario

Texas Instruments

Texas Instruments TPS65941120-Q1 Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

Texas Instruments

Texas Instruments SimpleLink CC2652RB Manual de usuario

Texas Instruments

Texas Instruments MSP430F6735A Manual de usuario

Texas Instruments

Texas Instruments RM46 Manual de usuario

Texas Instruments

Texas Instruments MSP430F67481 Manual de usuario

Texas Instruments

Texas Instruments MSP430F6777 Manual de usuario

Texas Instruments

Texas Instruments TLC2543 Manual de usuario

Texas Instruments

Texas Instruments MSPM0L1306 Manual de usuario

Texas Instruments

Texas Instruments ADC12DJ3200CVAL Manual de usuario

Texas Instruments

Texas Instruments SWRU351 Manual de usuario

Texas Instruments

Texas Instruments Errata MSP430F6736A Manual de usuario

Texas Instruments

Texas Instruments TMS320F28004x Manual del producto

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario

Silicon Laboratories

Silicon Laboratories C8051F800 Manual de usuario

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manual de usuario

Mikroe

Mikroe click Proximity 2 Manual de usuario