Teltonika TMT250 Manual de usuario
https://wiki.teltonika-gps.com/view/TMT250_First_Start
TMT250 First Start
Main Page > Autonomous Trackers > TMT250 > TMT250 First Start
Contents
1 How to insert micro SIM card and connect the battery
1.1 Correct Battery Connection
1.2 PC Connection (Windows)
1.3 How to install USB drivers (Windows)
1.4 Configuration (Windows)
1.5 Quick SMS configuration
1.6 Precautions
How to insert micro SIM card and connect the battery
Unscrew 4 screws counterclockwise.1.
Remove the cover.2.
Insert Micro-SIM card as shown. Make sure that Micro-SIM card cut-off corner is pointing3.
forward to slot.
Connect the battery as shown to the device.4.
Attach device cover back and screw in all 4 screws.5.
Device is ready to be used.6.
NOTE: In order to prevent device's cover from mechanical damage it is recommended to use
screwdriver, which is included in the package.
Correct Battery Connection
PC Connection (Windows)
Connect device to computer using Magnetic USB cable or Bluetooth connection:1.
Using Magnetic USB cable
You will need to install USB drivers, see "How to install USB drivers
(Windows)"
Using Bluetooth
TMT250 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then
select Add Bluetooth or other device > Bluetooth. Choose your device named –
“TMT250_last_7_imei_digits”, without LE in the end. Enter default password
5555, press Connect and then select Done.
You are now ready to use the device on your computer.2.
How to install USB drivers (Windows)
Please download COM port drivers from here.1.
Extract and run TeltonikaCOMDriver.exe.2.
Click Next in driver installation window.3.
In the following window click Install button.4.
Setup will continue installing the driver and eventually the confirmation window will appear.5.
Click Finish to complete the setup.
Configuration (Windows)
At first TMT250 device will have default factory settings set. These settings should be changed
according to the user's needs.
Main configuration can be performed via Teltonika Configurator software. Get the latest TMT250
Configurator version from here. Configurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements
Operatin
g system
MS .NET
Framework version Version Link
•
Windows
Vista
•
Windows
7
•
Windows
8.1
•
Windows
10
MS .NET Framework
4.6.2
32 and
64 bit
.NET
Fram
ewor
k
Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe.
After launch software language can be changed by clicking in the right bottom corner:
Configuration process begins by pressing on connected device:
After connection to Configurator Status window will be displayed:
Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc.
TMT250 has one user editable profile, which can be loaded and saved to the device. After any
modification of configuration the changes need to be saved to device using Save to device button.
Main buttons offer following functionality:
Load from device – loads configuration from device.1.
Save to device – saves configuration to device.2.
Load from file – loads configuration from file.3.
Save to file – saves configuration to file.4.
Update firmware – updates firmware on device.5.
Read records – read records from device.6.
Reboot device – restarts device.7.
Reset configuration – sets device configuration to default.8.
Most important configurator section is GPRS – where all your server and GPRS settings can be
configured and Data Acquisition – where data acquiring parameters can be configured. More
details about TMT250 configuration using Configurator can be found here.
Quick SMS configuration
Default configuration has optimal parameters present to ensure best performance of track quality
and data usage.
Quickly set up your device by sending this SMS command to it:
" setparam
2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
GPRS settings:
2001 – APN
2002 – APN username (if there are no APN username, empty field should be left)
2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
2004 – Domain
2005 – Port
2006 – Data sending protocol (0 – TCP, 1 – UDP)
Note: Before SMS text, two space symbols should be inserted.
After successful SMS configuration, TMT250 device will synchronize time and update records to
configured server. Time intervals and default I/O elements can be changed by using Teltonika
Configurator or SMS parameters.
Precautions
Operate the device in suitable conditions
Do not use the device where mobile connectivity is forbidden.
Road safety first
Comply with local traffic laws, always hold your hands on a steering wheel when using a device.
Your safety is of utmost importance when you drive.
Interference
All wireless devices are sensitive to electromagnetic interference, as a result wireless devices
affect the performance of each other.
Limit the use of device in hospitals
Please follow all restrictions. Turn off the device in the vicinity of medical devices when
required.
Limit the use of device in vehicles
Please follow all restrictions. Wireless devices can interfere with other electronic equipment in
vehicles.
Be cautious near flammable materials and liquids
Charging precautions
SELV LPS chargers, personal computers or laptops that device will be connected to must comply
with the requirements of IEC 60950:2005 standard.
Use only original batteries
Using uncertified manufacturer or different type batteries may cause an explosion.
Use batteries safely
Protect batteries from moisture. Place them in a cool and dry place when storing. Avoid
extensive operation at high temperatures. Do not attempt charging battery directly from the
electrical mains. All utilised batteries shall comply with IEC 62133.
Power supplies
Power supply circuits used to charge the device connection must have safeguards, which prevent
power leakage, short circuits or incorrect electrical grounding. Any used switches ought to be
installed in a readily accessible location. Power must be uninterrupted and the distance between
the contacts must be 3 mm or larger.
Remove device safely
Device must be disconnected from computer or charger by unplugging the magnetic USB cable
from the device.
Other
In order to prevent device from mechanical damage it is advisable to transport it in a
shock–resistant packaging. If device stopped working properly regardless of the settings only a
qualified specialist can help. It is recommended to contact your local seller or your UAB
Teltonika manager in such a case.
Use the right screwdriver
In order to prevent device's cover from mechanical damage it is recommended to use
screwdriver, which is included in the package. Do not use electrical screwdrivers.
https://teltonika-mobility.com/product/mini-tracker-easy/
Otros manuales para TMT250
9
Tabla de contenidos
Otros manuales de GPS de Teltonika
Teltonika
Teltonika FMP100 Manual de usuario
Teltonika
Teltonika FMB125 Guía de instalación
Teltonika
Teltonika FMB001 Guía de instalación
Teltonika
Teltonika FM6300 Guía de instalación y uso
Teltonika
Teltonika FM3612 Manual de usuario
Teltonika
Teltonika GH4000 Manual de usuario
Teltonika
Teltonika FMB003 Guía de instalación
Teltonika
Teltonika FMM125 Manual de usuario
Teltonika
Teltonika FMC00A Guía de instalación
Teltonika
Teltonika FMC130 Guía de instalación
Teltonika
Teltonika FM1100 Manual de usuario
Teltonika
Teltonika FM1110 Manual de usuario
Teltonika
Teltonika Telematics FMC880 Guía de instalación
Teltonika
Teltonika FMB920 Guía de instalación
Teltonika
Teltonika MH2000 Manual
Teltonika
Teltonika FMB900 Guía de instalación y uso
Teltonika
Teltonika FMB910 Guía de instalación
Teltonika
Teltonika FMB122 Guía de instalación
Teltonika
Teltonika FM3200 Manual de usuario
Teltonika
Teltonika AT1000 Manual de usuario
