Tektronix TDS200 Series Manual de usuario

Instructions

TDS 200-Series

Extension Modules

070-9565-04

This document supports TDS 200-Series firmware

version 1.06 and greater, TDS2HM firmware all

versions, TDS2CM firmware version 1.04 and

greater, and TDS2MM firmware version 1.00 and

greater. Refer to Read Me First on page 1 for

more information.

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Printed in the U.S.A.

Tektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

WARRANTY SUMMARY

(TDS2HM, TDS2CM, and TDS2MM Extension Modules)

Tektronix warrants that the products that it manufactures and sells will be free from defects

in materials and workmanship for a period of three (3) years from the date of shipment

from an authorized Tektronix distributor. If a product proves defective within the

respective period, Tektronix will provide repair or replacement as described in the

complete warranty statement.

To arrange for service or obtain a copy of the complete warranty statement, please contact

your nearest Tektronix sales and service office.

EXCEPT AS PROVIDED IN THIS SUMMARY OR THE APPLICABLE WARRANTY

STATEMENT, TEKTRONIX MAKES NO WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO

EVENT SHALL TEKTRONIX BE LIABLE FOR INDIRECT, SPECIAL OR

CONSEQUENTIAL DAMAGES.

TDS 200-Series Extension Module Instructions i

Table of Contents

General Safety Summary ii. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preface iv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conventions iv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command Entry v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contacting Tektronix vi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Getting Started 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dependencies 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Removing and Installing Modules 3. . . . . . . . . . . . . . . . . . . . . . .

Checking Module Installation 6. . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting Module Installation 6. . . . . . . . . . . . . . . . . . . . .

TDS2HM Hard Copy Module 7. . . . . . . . . . . . . . . . . . . . . . . .

Hard Copy Setup 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Testing the Hard Copy Port 9. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Printing an Oscilloscope Screen 9. . . . . . . . . . . . . . . . . . . . . . . .

TDS2CM Communications Module 10. . . . . . . . . . . . . . . . . . . .

RS-232 Setup 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GPIB Setup 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TDS2MM Measurement Module 27. . . . . . . . . . . . . . . . . . . . . .

Changed Math Operations 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signal Measurements 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the FFT 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix A: Certifications and Compliances 42. . . . . . . . . . . .

Appendix B: Comparing GPIB and RS-232 43. . . . . . . . . . . . .

Appendix C: Manuals 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ii TDS 200-Series Extension Module Instructions

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it. To avoid

potential hazards, use the product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the

system. Read the General Safety Summary in other system manuals

for warnings and cautions related to operating the system.

Injury Precautions

Avoid Electric Overload. To avoid electric shock or fire hazard, do not

apply a voltage to a terminal that is outside the range specified for

that terminal.

Do Not Operate Without Covers. To avoid electric shock or fire hazard,

do not operate this product with covers or panels removed.

Do Not Operate in Wet/Damp Conditions. To avoid electric shock, do not

operate this product in wet or damp conditions.

Do Not Operate in an Explosive Atmosphere. To avoid injury or fire

hazard, do not operate this product in an explosive atmosphere.

General Safety Summary

TDS 200-Series Extension Module Instructions iii

Product Damage Precautions

Do Not Operate With Suspected Failures. If you suspect there is damage

to this product, have it inspected by qualified service personnel.

Safety Terms and Symbols

Terms in This Manual. These terms may appear in this manual:

CAUTION. Caution statements identify conditions or practices that

could result in damage to this product or other property.

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you

read the marking.

WARNING indicates an injury hazard not immediately accessible as

you read the marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. These symbols may appear on the product:

ProtectiveGround

(Earth)Terminal ATTENTION

Refer to Manual Double

Insulated

DANGER

High Voltage

iv TDS 200-Series Extension Module Instructions

Preface

These instructions describe how to install, set up, and test the

TDS2CM, TDS2HM, and TDS2MM Extension modules. This

manual presumes that you understand how to operate the TDS

200-Series oscilloscope.

Conventions

This manual uses the following conventions:

Labeled oscilloscope panel buttons are shown in the manual in all

uppercase letters. For example: UTILITY, HARDCOPY.

On-screen menu items are shown in the manual with the first

letter of each menu word in upper case. For example: Options,

Recall Factory.

A list of panel buttons, separated by the symbol, represents the

order in which to push the listed buttons. For example,

UTILITY Options RS-232 means that you first push the

UTILITY panel button, then push the side menu button to the

right of the Options menu item, and then push the side menu

button to the right of the RS-232 menu item.

Preface

TDS 200-Series Extension Module Instructions v

Command Entry

Follow these general rules when entering oscilloscope commands

over the RS-232 or GPIB bus:

You can enter commands in upper or lower case.

You can abbreviate many oscilloscope commands. These

abbreviations are shown in uppercase letters. For example, the

command ACQuire:NUMAVg can be entered simply as

ACQ:NUMAV or acq:numav.

You can precede any command with white space characters.

White space characters include any combination of the ASCII

control characters 00 through 09 and 0B through 20 hexadecimal

(0 through 9 and 11 through 32 decimal).

The oscilloscope ignores commands that consist of just a

combination of white space characters and line feeds.

Preface

vi TDS 200-Series Extension Module Instructions

Contacting Tektronix

Product

Support For application-oriented questions about a Tektronix

measurement product, call toll free in North

America:

1-800-TEK-WIDE (1-800-835-9433 ext. 2400)

6:00 a.m. – 5:00 p.m. Pacific time

Or contact us by e-mail:

[email protected]

For product support outside of North America,

contact your local Tektronix distributor or sales

office.

Service

Support Contact your local Tektronix distributor or sales

office. Or visit our web site for a listing of

worldwide service locations.

http://www.tek.com/measurement

For other

information In North America:

1-800-TEK-WIDE (1-800-835-9433)

An operator will direct your call.

To write us Tektronix, Inc.

P.O. Box 1000

Wilsonville, OR 97070-1000

Otros manuales para TDS200 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Tektronix

Tektronix

Tektronix TM 502A Manual de usuario

Tektronix

Tektronix TDS3TRG Manual de usuario

Tektronix

Tektronix ECO170A Manual de usuario

Tektronix

Tektronix 3B5 Manual de usuario

Tektronix

Tektronix 80E07 Manual de usuario

Tektronix

Tektronix VX4237 Manual de usuario

Tektronix

Tektronix 73A-270 Manual de usuario

Tektronix

Tektronix VX4790A Manual de usuario

Tektronix

Tektronix KEITHLEY 7700 Manual de usuario

Tektronix

Tektronix TM 506A Manual de usuario

Tektronix

Tektronix 80A05 Manual de usuario

Tektronix

Tektronix 7D11 Manual de usuario

Tektronix

Tektronix TM 515 Manual de usuario

Tektronix

Tektronix ECO8000 Series Manual de usuario

Tektronix

Tektronix TM 5006 Manual de usuario

Tektronix

Tektronix 7B70 Manual de usuario

Tektronix

Tektronix 80A02 Manual de usuario

Tektronix

Tektronix DAS MTIF Manual de usuario

Tektronix

Tektronix TM 503 Manual de usuario

Tektronix

Tektronix TDS3TMT Manual de usuario

Tektronix

Tektronix KEITHLEY 4225-RPM Manual de usuario

Tektronix

Tektronix TLA7PG2 Manual de usuario

Tektronix

Tektronix VX4286 Manual de usuario

Tektronix

Tektronix TM 501 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario