Tektronix 80C14 Manual de usuario

80C14

Optical Sampling Module

ZZZ

User Manual

*P071295500*

071-2955-00

80C14

Optical Sampling Module

ZZZ

User Manual

www.tektronix.com

071-2955-00

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Warranty

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of three

(3) years from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at

its option, either will repair the defective product without charge for parts and labor, or will provide a replacement

in exchange for the defective product. Parts, modules and replacement products used by Tektronix for warranty

work may be new or reconditioned to like new performance. All replaced parts, modules and products become

the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of

the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible

for packaging and shipping the defective product to the service center designated by Tektronix, with shipping

charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within

the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping

charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage

resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product;

b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage

or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modiﬁed or

integrated with other products when the effect of such modiﬁcation or integration increases the time or difﬁculty

of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY

OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE

AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.

TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

[W4 – 15AUG04]

Table of Contents

General Safety Summary ......................................................................................... iv

Environmental Considerations ................................................................................... vi

Preface............................................................................................................. vii

Speciﬁcations................................................................................................. vii

Manual Structure............................................................................................. vii

Related Documentation ..................................................................................... viii

Getting Started ..... .................. ........................................ .................. ..................... 1

Instrument Requirements ..................................................................................... 1

Module Features ............................................................................................... 1

Options and Accessories...................................................................................... 3

Installation...................................................................................................... 4

Operating Basics.................................................................................................... 7

Usage............................................................................................................ 7

System Interaction............................................................................................. 8

Front Panel Controls........................................................................................... 9

Commands from the Main Instrument Front Panel ....................................................... 10

Programmer Interface Commands .......................................................................... 12

User Adjustments............................................................................................. 12

Optimizing Measurement Accuracy........................................................................ 12

Cleaning ....................................................................................................... 16

Reference........................................................................................................... 19

Wavelength, Filter, and Bandwidth Selection . .............. .............. .............. .................. 19

Clock Recovery ............................................................................................... 19

Optical Bandwidth............................................................................................ 19

Glossary

Index

80C14 Optical Sampling Module User Manual i

Table of Contents

List of Figures

Figure 1: Module compartments.................................................................................. 5

Figure 2: Connecting optical cables correctly................................................................... 7

Figure 3: 80C14 optical module front panel..................................................................... 9

Figure 4: Vertical Setup dialog boxes (DSA8200)............................................................. 11

ii 80C14 Optical Sampling Module User Manual

Table of Contents

List of Tables

Table 1: 80C14 module features.................................................................................. 2

Table 2: Standard accessories..................................................................................... 3

Table 3: Available 80C14 options ................................................................................ 3

Table 4: Optional accessories ..................................................................................... 3

80C14 Optical Sampling Module User Manual iii

General Safety Summary

General SafetySummary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

While using this product, you may need to access other parts of a larger system.

Read the safety sections of the other component manuals for warnings and

cautions related to operating the system.

To Avoid Fire or Personal

Injury

Ground the product. This product is indirectly grounded through the grounding

conductor of the mainframe power cord. To avoid electric shock, the grounding

conductor must be connected to earth ground. Before making connections to

the input or output terminals of the product, ensure that the product is properly

grounded.

Observe all terminal ratings. To avoid ﬁre or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

The inputs are not rated for connection to mains or Category II, III, or IV circuits.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum ratingofthatterminal.

Do not operate without covers. Do not operate this product with covers or panels

removed.

Do not operate with suspected failures. If you suspect that there is damage to this

product, have it inspected by qualiﬁed service personnel.

Avoid exposed circuitry. Do not touch exposed connections and components when

power is present.

Wear eye protection. Wear eye protection if exposure to high-intensity rays or

laser radiation exists.

Do not operate in wet/damp conditions.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.

Provide proper ventilation. Refer to the manual's installation instructions for details

on installing the product so it has proper ventilation.

iv 80C14 Optical Sampling Module User Manual

Tabla de contenidos

Otros manuales de Unidad de control de Tektronix

Tektronix

Tektronix VX4521 Manual de usuario

Tektronix

Tektronix VX4287 Manual de usuario

Tektronix

Tektronix 80E07 Manual de usuario

Tektronix

Tektronix KEITHLEY 4225-RPM Manual de usuario

Tektronix

Tektronix DAS MTIF Manual de usuario

Tektronix

Tektronix 80A01 Manual de usuario

Tektronix

Tektronix TM 506 Manual de usuario

Tektronix

Tektronix ECO8000 Series Manual de usuario

Tektronix

Tektronix TM 5003 Manual de usuario

Tektronix

Tektronix TDS3FFT Manual de usuario

Tektronix

Tektronix 73A-270 Manual de usuario

Tektronix

Tektronix ECO422D Manual de uso y cuidado

Tektronix

Tektronix VX4240 Manual de usuario

Tektronix

Tektronix TM 503 Manual de usuario

Tektronix

Tektronix 7A21N Manual de usuario

Tektronix

Tektronix 80E02 Manual de usuario

Tektronix

Tektronix VX4286 Manual de usuario

Tektronix

Tektronix 73A-851 Manual de usuario

Tektronix

Tektronix ECO170A Manual de usuario

Tektronix

Tektronix TDS3SDI Manual de uso y cuidado

Tektronix

Tektronix 80A05 Manual de usuario

Tektronix

Tektronix VX4237 Manual de usuario

Tektronix

Tektronix VX4790A Manual de usuario

Tektronix

Tektronix TM 501 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario