TANDBERG Videoconferencing System Hoja de información del producto
ENGLISH
Software version B3 and above
D12501-03
This document is not to be reproduced in whole or in part
without permission in writing from:
Short User Manual
- english
TANDBERG Videoconferencing SystemGeneral use
2
Contents
General use ........................................................................................ 3
Start-up screen ................................................................................................ 3
Making and ending calls .................................................................................. 4
Directory .......................................................................................................... 6
Do Not Disturb / Sleep Mode ........................................................................... 7
Adjusting volume ............................................................................................. 7
Microphone on/off ............................................................................................ 7
View outgoing video (selfview) ........................................................................ 7
Controlling the Main Camera ........................................................................... 8
Selecting video sources .................................................................................. 8
Presets............................................................................................................ 8
Duo Video * ..................................................................................................... 9
MultiSite (MCU)* ............................................................................................ 10
MCU functions ............................................................................................... 12
Installation ........................................................................................ 13
Precautions ................................................................................................... 13
Unpacking ..................................................................................................... 13
Connecting cables - 2500/6000..................................................................... 14
System configuration..................................................................................... 15
IMPORTANT:PLEASE READ
THIS SECTION CAREFULLY
FOR OPTIMAL SYSTEM SET-
UP.
TANDBERG Videoconferencing System General use
3
ENGLISH
Your system should be in standby mode. When in standby mode, pressing any key or picking up the remote
control will wake up the system. An incoming call will also wake up the system. If the system does not respond,
make sure the system is switched on.
The system’s most commonly used functions are accessible directly from the remote control.
Quick keys
The three buttons on top of the remote control refer to the blocks at the bottom of the
screen. The text inside the blocks will change depending on which menu is selected.
The three Quick keys have different colors.
Preset keys
Activate pre-stored camera positions.
Video source keys
Activate connected video sources.
Camera control and menu navigation keys
Frequently used keys allowing you to control your own camera and the far end camera,
control your volume, select and move self-view, switch your microphone off and navigate
in the menu system.
Dialing keys / Preset keys
Used to make a call. The twelve number keys, (0-9), #, * operate in the same way as
on a modern push-button telephone. These buttons are also used when entering a name
into a text field.
General use
Start-up screen
After a user-definable boot-up logo is shown, the following start-up screen is shown. This screen should provide
you with the most important system information.
TANDBERG Videoconferencing SystemGeneral use
4
Answer a call
To answer a call, press CONNECT.
Manual answer of a call is needed if the autoanswer facility is switched off.
End a call
To end a call, press DISCONNECT.
Correcting keying mistakes
To delete the last digit (or character) entered, press DELETE.
connect
disconnect
delete
Making and ending calls
Making a call
To make a call, enter the number or the IP-address of the unit you wish to call using the Dialing keys
and press CONNECT.
To make a call via a LAN, enter an IP-address by using a * as the ‘dot’ in the IP-address, e.g. 123*3*0*12 will be
interpreted as 123.3.0.12. If a gatekeeper is present, you may place IP-calls using “telephone-style” numbers (an
E.164 alias), according to the numbering plan implemented in the gatekeeper. The dialed number will then be
translated into an IP-address by the gatekeeper.
connect
Net: Auto Quality: Auto
ENDING ACALL
SWITCHING OFF THE MONITOR(S) WILL NOT DISCONNECT
ACALL. TODISCONNECT ACALL YOU SHOULD PRESS THE
DISCONNECT KEY.
TIP
TANDBERG Videoconferencing System General use
5
ENGLISH
Selecting / setting default number of channels
The default call quality setting ‘Auto’ will be used if no specific
quality is selected.
To select quality (bandwidth):
• Press the ‘Quality’ Quick Key when you are in the dial menu. The
Quality menu will then be displayed:
• Move the indicator to the desired bandwidth, then press
the ‘Select’ Quick Key.
• You may also press the ‘Set as Default’ Quick Key in
order to make the selected bandwidth the default
bandwidth for subsequent calls.
Selecting / setting default network
To select a specific network, press ‘Net’ when you are in
the dial menu.
TYPE OF CALLS
TANDBERG 6000/8000:
Auto 384kbps on ISDN/768kbps on LAN
Max * 768kbps on ISDN-BRI
* 1472/1920kbps (23/30Ch)
on ISDN-PRI (T1/E1)
* 3Mbps(1920kbps) on LAN
TANDBERG 550/880/1000/2500:
Auto 384kbps on ISDN/768kbps on LAN
Max 384kbps on ISDN/768kbps on LAN
TANDBERG 6000/8000 only:
3072 3072 kbps (3Mbps, LAN only)
2560 2560 kbps (2,5Mbps, LAN only)
1920 1920 kbps (2Mbps, 30B)
1472 1472 kbps (23B)
1152 1152 kbps (18B)
All products:
768 768 kbps (12B)
512 512 kbps (8B)
384 384 kbps (6B)
320 320 kbps (5B)
256 256 kbps (4B)
192 192 kbps (3B)
128 128 kbps (2B)(Bonding/H.221)
64 64 kbps (1B)(H.221)
H0 1xH0 (384 kbps) (PRI only)
Teleph Telephone Call
SOME SOFTWARE VERSIONS AND NETWORKS
DO NOT SUPPORT ALL CHANNEL SELECTIONS.
TANDBERG Videoconferencing SystemGeneral use
6
Add New Entry
When selecting ‘Add New Entry’, an empty directory entry is displayed:
Enter ‘Name’ and ‘Number’. Specify also ‘Net’ and ‘Quality’ if needed.
Edit Entry
To edit an entry, highlight the entry you want to edit and press ‘Edit Entry’. Edit the entry and select ‘Save’ to
return to the Directory menu.
Delete Entry
To delete an entry, highlight the entry and press DELETE.
To find an entry, key in the first letter, for example T, and scroll with the up/down arrows.
THE LEFT/RIGHT ARROWS WILL MOVE ONE PAGE UP/DOWN.
To dial the selected number press CONNECT. To edit the selected number before dialing, press OK.
Directory
The directory is a local phone book that stores up to 99 directory entries and the last number dialed.
Press DIRECTORY to bring up the following menu:
directory
connect
TIP
TANDBERG Videoconferencing System General use
7
ENGLISH
Adjusting volume
Press
V
OLUME
to adjust the volume level. An on-screen indicator will show the current level.
+
-
selfview
move pip
mic off
Microphone on/off
To mute your microphone, press MIC OFF. An on screen indicator will appear.
Press MIC OFF to activate the microphone again.
View outgoing video (selfview)
Press the S
ELFVIEW
key to view your outgoing video.
Press MOVE PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
switch it off.
Do Not Disturb / Sleep Mode
Press ‘Standby’ when not in a call to activate the Quick Menu.
When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy
tone when calling this unit. A status line will indicate when Do Not Disturb is active.
When Sleep Mode is activated, the monitors will be black. The system will still accept incoming calls.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
Add MultiSite*
When selecting ‘MultiSite’, an empty MultiSite directory entry is displayed:
Enter the MultiSite meeting name. Select ‘Add Site’ to add a site to the meeting by searching for point-to-point
entries in the directory list. Select ‘Quality’ to override the suggested bandwidth per site.
* - Optional feature and not available on all systems.
TANDBERG Videoconferencing SystemGeneral use
8
Presets
The preset buttons enable you to pre-store up to ten different camera positions.
Selecting presets
To select a preset, use the keys P1 P2 P3 or press P until the on-screen indicator ‘Preset 0-9’appears and use
0-9 to activate P0-P9 presets. To exit ‘Preset’ mode, press OK.
P1-P3 are the same presets as when pressing Pand then a number key 1-3.
Storing presets
To store the current camera position, audio and video source:
• Press STORE once and wait for the on-screen indicator to appear.
• Then press one of the keys P1 P2 P3 or a number key 0-9.
store
P
1
P
2
P
3
Selecting video sources
Press: to select a video source.
doc cam
main cam
vcr pc
aux
OK
zoom
Controlling the Main Camera
Moving / zooming camera
To control the Main Camera use the keys below:
for pan/tilt and for zooming.
TANDBERG Videoconferencing System General use
9
ENGLISH
Duo Video *
Duo Video is useful if you want to display live video from your document camera or another camera in addition to
live video of yourself.
Add Duo Video
• Press any other video source than used on the main connection during a call. This will open Duo Video directly
if the far end supports the automatic Duo Video functionality.
• To use the manual Duo Video functionality, press CONNECT during a call. This will bring up the following menu:
• Select ‘Add Duo Video’. The following menu will be displayed:
• Select video source to transmit on Duo Video.
• Press CONNECT to add Duo Video.
* - Optional feature and not available on all systems.
End a Duo Video call
To end a Duo Video call, press DISCONNECT. Select if you want to disconnect only the Duo Video
connection or the whole connection.
disconnect
Controlling camera, changing video source, presets in a Duo Video call
The main monitor will always display incoming video. The 2nd monitor will display outgoing video.
Pressing SELFVIEW will toggle Duo Video full screen / Main source in PIP and vice versa.
Pressing MOVE PIP will move PIP only on the 2nd monitor.
Controlling the camera, changing video source, using presets will affect the video source currently displayed in full
screen mode.
If both connections are selected to display the same video source, Duo Video will be closed.
TANDBERG Videoconferencing SystemGeneral use
10
• Press ‘Add Site’ to bring up the MultiSite dial menu.
• Enter the number to call.
• Press CONNECT
connect
• Press CONNECT to bring up the following menu:
Adding an extra site - dial out
First establish a normal point-to-point call.
MultiSite (MCU)*
The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish
meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile). The video calls
in a conference must be connected using the same bandwidth. It is possible to have telephone meetings with up
to 5 participants. A conference can consist of any combination of ISDN/LAN sites.
* - Optional feature.
Establishing MultiSite meetings using Directory
It is possible to pre-define meetings using Directory. All sites will then be connected automatically instead of
having to add one by one site.
• Press DIRECTORY.
• Highlight a MultiSite entry and press CONNECT.
See ‘Directory’ section for further information.
Tabla de contenidos
Otros manuales de Sistema de conferencias de TANDBERG
TANDBERG
TANDBERG 770 MXP Manual de usuario
TANDBERG
TANDBERG 880 Manual de usuario
TANDBERG
TANDBERG 3000 MXP Profile Manual de usuario
TANDBERG
TANDBERG Media Processing System MPS 800 Manual de usuario
TANDBERG
TANDBERG 3000 MXP Profile Manual de usuario
TANDBERG
TANDBERG MEDIAP2 Manual de usuario
TANDBERG
TANDBERG 3000 MXP Profile Manual de usuario
TANDBERG
TANDBERG Edge D13922.06 Instrucciones de montaje
TANDBERG
TANDBERG E20 Manual de servicio
TANDBERG
TANDBERG MPS 200 Manual de servicio
TANDBERG
TANDBERG F1 D13353.02 Manual de usuario
TANDBERG
TANDBERG Vision 5000 Manual de usuario
TANDBERG
TANDBERG 3000 MXP Profile Manual de usuario
TANDBERG
TANDBERG 8000 MXP Manual de usuario
TANDBERG
TANDBERG 8000 MXP Instrucciones de montaje
TANDBERG
TANDBERG 1000 Manual de usuario
TANDBERG
TANDBERG Codec C90 D14128.02 Guía de configuración rápida
TANDBERG
TANDBERG 1000 Manual de usuario
TANDBERG
TANDBERG Telepresence T3 Manual de usuario
TANDBERG
TANDBERG MPS Manual de usuario
Manuales populares de Sistema de conferencias de otras marcas
Kramer
Kramer VIA GO Manual de usuario
AVT
AVT MAGIC AC1 Go Manual de usuario
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manual de usuario
Sony
Sony PCS-I150 Manual de usuario
Middle Atlantic Products
Middle Atlantic Products VTC Series Manual de usuario
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guía
