SureCall Fusion2Go 2.0 Manual de usuario

Fusion2Go 2.0™

Vehicle Voice and 4G Data Signal Booster

User Guide

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

Table of Contents

Thank you for purchasing SureCall’s Fusion2Go 2.0 cell phone signal booster kit. Fusion2Go 2.0

provides enhanced voice, text and 4G data signal for any vehicle.

If you have any questions during setup, please reach out to our US-based experienced support

technicians:

• Call: 1-888-365-6283

• Email: [email protected]

How It Works ................................................................................................................................. 3

Package Contents ......................................................................................................................... 4

Step 1: Mount Outside Antenna..................................................................................................... 5

Step 2. Install the Inside Patch Antenna........................................................................................ 5

Step 3. Install the Booster ............................................................................................................ 6

Step 4. Connect Power.................................................................................................................. 6

LED Indicators .............................................................................................................................. 7

Troubleshooting............................................................................................................................. 8

Specications ................................................................................................................................ 9

Antenna Kitting Information ......................................................................................................... 10

FCC and IC Information............................................................................................................... 12

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected] 3

How It Works

The SureCall Fusion2Go 2.0 is a high-quality bidirectional booster that enhances cellular signals for

vehicles.

The Fusion2Go 2.0 works with two antennas:

• An inside antenna that communicates with your cell phone.

• An outside antenna that communicates with the cell tower.

Signals sent from a cell tower are received by the outside antenna, amplied by the booster and

then sent to your cell phone via the inside antenna. When your phone transmits, the signal is sent to

the inside antenna, and then sent to the cell tower via the outside antenna.

How It Works

Outside Magnetic

Antenna

Power Adapter

Inside Antenna

Fusion2Go

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

Package Contents

1. Unpack all package contents. For missing or damaged items, contact your reseller.

2. Turn over the signal booster and record the model and serial number for reference:

Serial #:

Purchase Date:

3. Keep the carton and packing material to store the product in case you need to return it.

Your Fusion2Go 2.0 signal booster package includes the following items:

• One SureCall Fusion2Go 2.0 signal booster

• DC power adapter

• One inside patch antenna

• One outside magnetic mount antenna

Fusion2Go 2.0

Amplier

SC-120

Inside Patch Antenna

Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact FCC for details:

1-888-CALL-FCC. Changes or modications not expressly approved by SureCall could void the user’s authority to operate the equipment.

Power Adapter Outside Magnetic-Mount

Antenna

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected] 5

Step 1: Mount Outside Antenna

Place the magnetic-mount antenna on the top of your vehicle preferably toward the back, maximiz-

ing the distance from planned location of the inside patch antenna. Ensure that the antenna has at

least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna.

Next, run the cable from the outside antenna to the inside of the vehicle near the planned location

of the booster (under the seat of the vehicle, or in the front or middle console ). Run the outside

antenna cord across the car’s roof and under the front door insulation lining to hide and protect the

antenna cable.

Note: The outside antenna must not be collocated or operating with any other antenna or booster.

Step 2. Install the Inside Patch Antenna

Find a location for the inside patch antenna that is within 2-3 feet of the typical cell phone location.

Choose a location that is at least 4 inches (10cm) away from metal and afx the antenna to the

chosen surface. Then run the connected cable to the planned location of the booster.

Installation

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

Installation

Step 3. Install the Booster

Place the booster under the seat of the vehicle or any convenient location within the vehicle. Choose

a location that is away from excessive heat, direct sunlight or moisture and with proper ventilation.

Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the

cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and

wrap up any loose cable.

Step 4. Connect Power

Connect the power cord connector to the signal booster and insert the other end into your cigarette

lighter adapter. The Power LED lights up to show that the signal booster is ready for use. The Alert

LEDs ash 5 times to show the frequency band is operational.

Place a call in a location you have previously experienced poor signal and conrm that your phone

is receiving a boosted signal.

Note: .1. The patch antenna must remain at least 20 cm away from the body

2. The Patch antenna must be at least 20 cm away from the phone or cradle that phone is sitting in.

3. Laboratory tests show that patch antennas can work from as close as 2 ft. from the outside antenna if the patch

antenna is facing away from the outside antenna.

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected] 7

LED Indicators

In the event Red LEDs appear either solid or ashing, further separation between the booster and

outside antenna is recommended.

Note that the booster case may become warm during operation. This is normal.

WARNING. The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the

booster and/or cause personal injury.

Installation

DC Power Connection

Connector to Inside Antenna

Connector to Inside antenna

Connector to Outside

Magnetic antenna

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

SpecicationsTroubleshooting

Troubleshooting

Problem Resolution

Signal booster has no

power

Verify that the LED on the booster is ON.

Connect the power supply to an alternate power source.

Verify that the power source is operational and the fuse is intact.

If the POWER LED on the signal booster is OFF, return the power supply to SureCall. Contact tech support at to

receive an RMA at:

1-888-365-6283 or [email protected].

After completing

installation, signal has

not Improved

Verify that cable connections are tightly tted to the booster.

Try further separating the antennas.

Remember: Bars are not always a reliable measure of signal. The best way to conrm signal coverage is the

ability to place and hold a call.

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected] 9

Specications

RF Exposure Warning:

The inside patch antenna must be installed so as to provide a separation distance of al least 20 cm (8 inches) from all persons

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present,

the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band

users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

Specications

Product Fusion2Go 2.0 US Fusion2Go 2.0 Canada

Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)

Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)

Input / Output Impedance: 50 Ω

Maximum Gain: 50 dB 47.8 dB

Noise Figure: ≤ 5 dB

VWSR: ≤ 2.0

Gain Adjustment: 20 dB (Automatic)

Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards

DC Power: 6-15V

Maximum Output Power: 1 Watt EIRP 3 Watt EIRP

Cable: SC-174

RF Connectors: FME Male (both ends)

Power Consumption: ≤ 10W

Operation Temperature: -4º to +158º F

Dimensions: 5.625 x 4 x 1.125 inches

Weight: 1.43 lbs

FCC / IC ID: RSN2GOMINI 7784A-2GOMINI

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

Antenna Kitting Information

Component Prod No. Description Gain Notes

LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz \

2100 MHz

Vehicle Kit 1

Outdoor Antenna

and Cable

SC200W

SC174-10 ft (10 ft)

-2.3 dB -2.3 dB -2.3 dB -5.8 dB -3.98 dB \ -

5.96 dB

Indoor Antenna and

Cable

SC110W

SC174-10 ft (10 ft)

-2.7 dB -2.7 dB -3.2 dB -5.8 dB -3.98 dB \ -

5.96 dB

Tabletop Antenna

Vehicle Kit 2

Outdoor Antenna

and Cable

SC208W

SC174-12.5 ft (12.5 ft)

-3.16 dB -5.15 dB -5.65 dB -2.85 dB -3.34 dB \

Indoor Antenna and

Cable

SC110W

SC174-10 ft (10 ft)

-2.7 dB

-3.2 dB -5.8 dB -3.98 dB \

-5.96 dB

Tabletop Antenna

*All equivalent antennas and cables are suitable for use with the Fusion2Go 2.0

Component Prod No. Description Gain Notes

LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz \

2100 MHz

Marine 1 Kit

Outdoor Antenna

and Cable

SC288W or Galaxy 5412-P

SC240-40FN (40 ft)

-0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 dB\-

2.92 dB

Indoor Antenna and

Cable

SC248W

SC240-20FN (20 ft)

4.94 dB 4.94 dB 4.71 dB 6.44 dB 6.64 dB \

6.24 dB

Wall Mounted

Antenna

Marine 2 Kit

Outdoor Antenna

and Cable

SC288W or Galaxy 5412-P

SC240-40FN (40 ft)

-0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 dB \

-2.92 dB

Indoor Antenna and

Cable

SC302W

SC240-20FN (20 ft)

0.44 dB 0.44 dB 0.71 dB 1.44 dB 0.64 dB \

1.24 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 2.0

Component Prod No. Description Gain Notes

LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz \

2100 MHz

Desktop / RV 1 Kit

Outdoor Antenna

and Cable

SC288W

SC240-40FN (40 ft)

-0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 dB \

-2.92 dB

Indoor Antenna SC120W 1.2 dB 1.2 dB 1.2 dB 3 dB 3 dB \ 3 dB Tabletop Antenna

Desktop / RV 2 Kit

Outdoor Antenna

and Cable

SC288W

SC240-40FN (40 ft)

-0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 dB \

-2.92 dB

Indoor Antenna and

Cable

SC302W

SC240-20FN (20 ft)

0.44 dB 0.44 dB 0.71 dB 1.44 dB 0.64 dB \

1.24 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 2.0

Kitting InformationKitting Information

Otros manuales para Fusion2Go 2.0

Tabla de contenidos

Otros manuales de Extensor de SureCall

SureCall

SureCall EZ Call Manual de usuario

SureCall

SureCall Fusion5 Manual de usuario

SureCall

SureCall Fusion2Go 3.0 CA Manual de usuario

SureCall

SureCall Fusion2Go 3.0 CA Manual de usuario

SureCall

SureCall M2M Manual de usuario

SureCall

SureCall FusionTrek Manual de usuario

SureCall

SureCall SC-PolyO-72 Manual de usuario

SureCall

SureCall Fusion5X Manual de usuario

SureCall

SureCall DualForce Manual de usuario

SureCall

SureCall TriFlex2Go Manual de usuario

SureCall

SureCall FusionTrek Manual de usuario

SureCall

SureCall Force7 Industrial Manual de usuario

SureCall

SureCall N-Range Manual de usuario

SureCall

SureCall Fusion2Go Max Manual de usuario

SureCall

SureCall Fusion4Home Omni/Panel Manual de usuario

SureCall

SureCall Fusion2Go Max Manual de usuario

SureCall

SureCall Fusion5s 2.0 Omni/Dome Manual de usuario

SureCall

SureCall Fusion2Go Max Manual de usuario

SureCall

SureCall 5X Max Manual de usuario

SureCall

SureCall Force5 2.0 Manual de usuario

SureCall

SureCall Fusion2Go 3.0 CA Manual de usuario

SureCall

SureCall Shakespeare STREAM Manual

SureCall

SureCall Flare 3.0 Manual de usuario

SureCall

SureCall Fusion4Home 3.0 CA Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario