StarTech.com PCI1394 2LP Manual

Low-Profile 2-port IEEE 1394 FireWire

PCI Card with Video Editing Software

PCI1394_2LP

Instruction Guide

The Professionals’ Source For Hard-to-Find Computer Parts

FIREWIRE

CARD

* Actual product may vary from photo

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing Your Ulead VideoStudio SE Software . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Introduction

Thank you for purchasing a StarTech.com FireWire PCI card and digital video editing kit.

This low profile, two-port card allows you to instantly connect your video camera, image

scanner, digital still camera, or any other IEEE 1394 FireWire device to your PC. And

with the Ulead VideoStudio digital editing software included in this kit, you can create

and edit your home movie masterpieces with ease.

Features

•Compatible with most digital video camcorders including Sony, Canon, Panasonic,

JVC, Samsung, and many others

•Supports hard disk drives, DVD drives, CD-R/RW drives, printers, etc.

•Data transfer rates of up to 400 Mbits/sec

•Allows easy connection of internal and external FireWire peripherals

•Backed by StarTech.com’s limited lifetime warranty

Before You Begin

To ensure a quick and easy FireWire PCI card installation, please read through this

section carefully before attempting to install the card.

System Requirements

•An IBM-PC compatible computer running Windows XP/2000/ME/98SE

•One open PCI slot (must be low profile)

Ulead VideoStudio SE Recommendations for Digital Video:

•Pentium III (800 MHz or above) processor with 256 MB of RAM (512+ MB

recommended)

•600 MB available hard drive space for program installation, 4+ GB additional

available hard drive space for video capture and editing

•Display system capable of 1024 x 768 resolution, DirectX version 9 (or higher)

WARNING! PCI cards, like all computer equipment, can be severely damaged by static

electricity. Be sure that you are properly grounded before opening your computer case or

touching your PCI card. StarTech.com recommends that you wear an anti-static strap

when installing any computer component. If an anti-static strap is unavailable, discharge

yourself of any static electricity build-up by touching a large grounded metal surface

(such as the computer case) for several seconds. Also be careful to handle the PCI card by

its edges and not the gold connectors.

Contents

•1x 2-port low profile FireWire card

•1x 4-6 pin IEEE 1394 FireWire cable

•1x Ulead VideoStudio SE editing software CD

Installation

This section will guide you through the installation of your FireWire PCI card and Ulead

VideoStudio editing software. Please read through the instructions carefully and

complete each step in the order listed.

Installing the Card

1. Make sure that your system is unplugged and you are grounded.

2. Remove the cover of your system (see your computer’s user manual for details, if

necessary) and gently turn your computer onto its side.

3. Locate an empty low profile PCI slot (usually white in color) and remove the metal

plate that covers the rear bracket. You may need a screwdriver to perform

this step. Retain the screw! You will need it to secure the card later.

4. Gently insert the FireWire card into the empty slot, making sure it is firmly seated.

5. Secure the card in place using the screw you removed in Step 3, if used.

6. Put the computer case back on.

Installing the Drivers

Once you have connected your FireWire card, the next time you turn on your computer

Windows will automatically detect that you have installed new hardware. Follow the

instructions below to install the required software drivers. Depending on your operating

system and the configuration of your system, the instructions you see on your screen

may not be identical to the instructions below.

Windows XP/2000

Windows will automatically detect the new device and install the drivers automatically.

To verify that the FireWire card has been properly installed, choose the following:

1. Click Start.

2. Right-click My Computer and choose Properties by highlighting it and left-clicking

once.

3. Click the Hardware tab, and then click Device Manager.

4. Look for IEEE 1394 Bus host controllers category. Click the + symbol next to the

name.

5. If VIA OHCI Compliant IEEE 1394 Host Controller appears without an exclamation

mark or other warnings, the card is installed correctly.

Windows ME

1. Windows should automatically detect the new hardware. At the Add New Hardware

Wizard window, click Next.

2. Select “Search for the best driver for your devices (Recommended)” and click Next.

3. Insert your Windows ME CD into your computer’s CD-ROM drive. Select “CD-ROM

drivers” and click Next.

4. Click Finish.

5. Remove the CD and select Yes to restart your computer.

To verify that the FireWire card has been properly installed, choose the following:

1. Click Start.

2. Right-click My Computer and choose Properties by highlighting it and left-clicking

once.

3. Click Device Manager.

4. Look for 1394 Bus Controller category. Click the + symbol next to the

name.

5. If VIA OHCI Compliant IEEE 1394 Host Controller appears without an exclamation

mark or other warnings, the card is installed correctly.

Windows 98SE (Second Edition)

1. Windows should automatically detect the new hardware. At the Add New Hardware

Wizard window, click Next.

2. Select “Search for the best driver for your devices (Recommended)” and click Next.

3. Insert the Windows 98SE CD-ROM and check the “CD-ROM drive” option. Click

Next.

4. Choose “The Updated Driver (Recommended)” and click Next.

5. Click Next again. If prompted for the Windows CD again, type “x:\win98” and click

OK where “x:” is the drive letter assigned to your CD-ROM drive.

6. Click Next, then Finish to complete the driver installation.

7. If prompted, remove the Windows CD from the drive and click Yes to restart.

To verify that the FireWire card has been properly installed, choose the following:

1. Click Start, Settings, Control Panel.

2. Double click System and choose the Device Manager tab by highlighting it and

clicking it once.

3. Look for 1394 Bus Controller category. Click the + symbol next to the

name.

4. If VIA OHCI Compliant IEEE 1394 Host Controller appears without an exclamation

mark or other warnings, the card is installed correctly.

Installing Your Ulead VideoStudio SE Software

For detailed instructions on the installation and use of the digital editing software,

consult the Ulead VideoStudio manual available on the CD. From the VideoStudio CD

setup screen click Browse CD then open the Document and Manual folders and select

your language (Note: To view the manual, you will need Adobe Acrobat Reader, which

you can download from the Install Drivers menu on the CD). StarTech.com recommends

carefully reading the instructions supplied by Ulead before attempting to install or use

the software.

1. Insert the VideoStudio CD into your computer’s CD drive. The setup screen should

appear automatically. If the screen does not appear, run the CD manually by double-

clicking on My Computer then double-clicking the CD icon.

2. Click on Install and follow the installation instructions.

3. Follow the on-screen instructions.

Specifications

Bus Interface PCI with Power Management

Form Factor Low profile

Transfer Rate 100/200/400 Mbits/sec.

Protocols Asynchronous and Isochronous data transfer

Real-time digital applications (digital video)

Non real-time (printers, scanners)

Hot-plug devices supported

Serial Bus 3-port PHY layer connector and interface

Maximum of 63 device connections via daisy chain

Maximum device cable length: 14.5 ft. (4.5 m)

Connectors 2 x External 6-pin FireWire Female

1 x Internal 6-pin FireWire Female

Software Included Ulead VideoStudio SE

OS Support Windows XP/2000/ME/98SE

Warranty Limited Lifetime

Technical Support

The following technical resources are available for this StarTech.com product:

On-line help:

We are constantly adding new information to the Tech Support section of our web site. To

access this page, click the Tech Support link on our homepage, www.startech.com. In the

tech support section there are a number of options that can provide assistance with this

product.

Knowledge Base - This tool allows you to search for answers to common issues using

key words that describe the product and your issue.

FAQ - This tool provides quick answers to the top questions asked by our customers.

Downloads - This selection takes you to our driver download page where you can

find the latest drivers for this product.

Call StarTech.com tech support for help:

USA/Canada: 1-800-265-1844

UK/Ireland/Europe: 00-800-7827-8324

Support hours: Monday to Friday 9:00AM to 5:00PM EST (except holidays)

Warranty Information

This product is backed by a lifetime warranty. In addition, StarTech.com warrants its

products against defects in materials and workmanship for the periods noted,

following the initial date of purchase. During this period, the products may be

returned for repair, or replacement with equivalent products at our discretion. The

warranty covers parts and labor costs only. StarTech.com does not warrant its products

from defects or damages arising from misuse, abuse, alteration, or normal wear and

tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

officers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the actual

price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential

damages. If such laws apply, the limitations or exclusions contained in this statement

may not apply to you.

Revised: May 19, 2004

Tabla de contenidos

Otros manuales de Tarjeta PCI de StarTech.com

StarTech.com

StarTech.com PEXUSB3S25 Manual de usuario

StarTech.com

StarTech.com PEX2S553B Manual del sistema

StarTech.com

StarTech.com 8STPEXUSB3S25 Manual de usuario

StarTech.com

StarTech.com PEXUSB3S42 Manual de usuario

StarTech.com

StarTech.com QUAD-M2-PCIE-CARD-B Manual de usuario

StarTech.com

StarTech.com PEX1S1PMINI Manual de usuario

StarTech.com

StarTech.com PCI1394_4 Manual de usuario

StarTech.com

StarTech.com PR42GI-NETWORK-CARD Manual de usuario

StarTech.com

StarTech.com PEX1S952 Manual de usuario

StarTech.com

StarTech.com PCI4S550 Manual de usuario

StarTech.com

StarTech.com PCIUSB3S2 Manual de usuario

StarTech.com

StarTech.com PEX4M2E1 Manual de usuario

StarTech.com

StarTech.com ST1000BT32 Manual de usuario

StarTech.com

StarTech.com CB1S485 Manual de usuario

StarTech.com

StarTech.com PCI2S4851050 Manual de usuario

StarTech.com

StarTech.com PEXUSB3S42V Manual de usuario

StarTech.com

StarTech.com PEXUSB312C3 Manual de usuario

StarTech.com

StarTech.com PEXESATA1 Manual de usuario

StarTech.com

StarTech.com PEXMSATA343 Manual de usuario

StarTech.com

StarTech.com PEX4S952 Manual de usuario

StarTech.com

StarTech.com PCISOUND5LP Manual de usuario

StarTech.com

StarTech.com PEXUSB3S2 Manual de usuario

StarTech.com

StarTech.com PEX4S952LP Manual de usuario

StarTech.com

StarTech.com PEX1P Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario