StarTech.com SVID2USB2NS Manual de usuario

USB 2.0 Video Capture

Cable

USB 2.0 to Composite / S-Video

Video Capture Cable

SVID2USB2NS

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and

do not represent an endorsement of a product or service by StarTech.com, or an en-

dorsement of the product(s) to which this manual applies by the third-party company in

question. Regardless of any direct acknowledgement elsewhere in the body of this doc-

ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,

service marks, and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

Table of Contents

Introduction..................................................................... 1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Installation....................................................................... 1

Driver Installation.........................................................................2

Application Installation.................................................................3

Hardware Installation...................................................................4

Operation......................................................................... 5

Option..........................................................................................6

General....................................................................................6

Encoder Property ....................................................................6

Troubleshooting .............................................................. 8

Speciﬁcations.................................................................. 11

Technical Support........................................................... 12

Warranty Information...................................................... 12

Introduction

Packaging Contents

1 x SVID2USB2NS video capture cable•

1 x User Manual•

1 x Driver CD•

System Requirements

USB 2.0 equipped computer•

Pentium 4 - 1GHz or above or equivalent AMD processor•

128MB of RAM•

Microsoft Windows• ®2000 SP4, XP SP2 or above, or Vista

Installation

USB 2.0 connector: Connect to USB 2.0 port of your computer

S-Video input: S-Video input from external A/V device (e.g. VCR)

Composite video input: Composite video input from external A/V

Device (e.g. VCR)

If you want capture audio, please connect audio directly to*

Line-in of your Sound card.

Driver Installation

Do not connect SVID2USB2NS adapter to computer USB port*

before driver installation!

Please make sure your computer has USB2.0 port correctly*

installed and functioning !! ( Please update your Windows®XP

to at least SP2, or Windows®2000 to SP4, and updating the USB

2.0 host controller drivers before installation to make sure the

computer’s USB 2.0 is functioning correctly)

Please insert “Multimedia Installation Kit” CD-ROM into your CD-1.

ROM drive; AutoRun will play; (if AutoRun does not run, please go to

“My Computer” and double click the CD-ROM drive).

From the menu, please select the “GrabBeeX-light” product.2.

Please select “Device Driver” on the next screen.3.

Note: In Vista, windows will get a pop up dialogue box. Choose*

“Allow” to continue the installation.

Click “Next”.4.

Complete Setup Wizard.5.

Click “Finish”, then please restart the computer.6.

Application Installation

Please insert “Multimedia Installation Kit” CD-ROM into your CD-1.

ROM drive; AutoRun will play; (if AutoRun does not run, please go to

“My Computer” and double click the CD-ROM drive).

From the menu, please select the “GrabBeeX-light” product.2.

Please select “Application Software” on the next screen.3.

Please select “GrabBee”.4.

Welcome to the InstallShield wizard; Click “Next”.5.

Select the language you will use for GrabBee; then click “Set”.6.

Choose the destination location; Click “Next”.7.

Note: Under Windows Vista, steps 8 to 17 will automatically be•

skipped. Please do not worry as this is normal.

Install Windows Media Format 9 Series Runtime Setup;8.

Click “Yes”.9.

License agreement; Click “Yes”.10.

Finished Windows Media Format 9 Series Runtime installation;11.

Click “OK”12.

License for Windows Media Tools Setup; Click “Yes”.13.

Windows Media Tools Setup; Click “Next”.14.

Create folder; Click “Yes”.15.

Installation Options; Click “Next”.16.

Installation Directory; Click “Finish”.17.

Setup Complete; Click “OK”.18.

InstallShield Wizard Complete; Click “Finish” then please restart the19.

computer.

After the AP software is installed, three icons will now be shown on

screen:

GrabBee : GrabBee software main program

Record Files : Click to see your record ﬁles

Snapshot : Click to see your capture still image ﬁles

Hardware Installation

After the computer restarts, please plug the SVID2USB2NS device into

the computer’s USB 2.0 port; System will now detect the new device

and install it automatically.

Please check whether the SVID2USB2NS driver was installed

successfully in your computer.

Operation

Starting : Please click the “GrabBee” icon. After starting the applica-

tion, you can see video window as below.

Video Window : Please move mouse cursor into Video window and

right click, function menu will appear as below.

Resolution : There are 4 resolution video preview you can select,

NTSC mode : 352x240, 640x480, 720x480, Full screen

PAL mode : 352x288, 640x480, 720x576, Full screen

Option

General

Lists your hard disk space information.a.

Snapshot default storage path : The location to saved captured im-b.

age ﬁles.

Clip default storage path : Location to saved recorded video ﬁles.c.

Video Format : Choose your correct video format input.d.

Set Recording Time : Sets Recording Time length.e.

Encoder Property

Video Setting : Recording ﬁle type format AVI, MPEG-1, MPEG-2,a.

VCD, SVCD, DVD, WMV, *MP4 selection (if you want DVD burning,

please choose DVD mode)

Proﬁle : Video Size, Frame Rate, Video Quality, Video Bitrate setting;b.

Information column will display your setting

Note:* File format ‘MP4’ will not appear as a selectable option under

Windows Vista.

Schedule Record : Set One-time schedule here. Input your Start and

Stop time, Date, Video Source, and File Name. Click ‘Add’ after input

then ‘OK.’

Video Input : Switch between Composite or S-Video input.

Slide Bar : Move to any video position during playback.

Color Setting : Brightness/Contrast/Hue/Saturation adjustment.

Mute : Volume On/Off

Pause : Pauses the playback ﬁle

Record : Click this button to start recording a video. After you click

“Stop“ button, a table will be shown, which asks you to rename or save

the ﬁle; default ﬁle name format is “Mddhhmmss”.

M : Month (Jan->1, Feb->2….Oct->O, Nov->N, Dec->D)

dd : Date, hh : Hour, mm : Minute, ss : Second

Stop : Stop Recording and Playback;

Playback : Play the recorded ﬁle

SnapShot : Image capture resolution is the same as Preview mode’s

Resolution; click SnapShot and a table shows as below.

You can “Save”, “Save All”, “Delete”, “Delete All” image ﬁles, ﬁle name’s

format is “Mddhhmmssn”.

M : Month (Jan->1, Feb->2….Oct->O, Nov->N, Dec->D)

dd : Date; hh : Hour; mm : Minute; ss : Second

n : Number

Otros manuales para SVID2USB2NS

Tabla de contenidos

Otros manuales de Cables y conectores de StarTech.com

StarTech.com

StarTech.com ST122LE Manual del sistema

StarTech.com

StarTech.com SVID2USB2NS Manual de usuario

StarTech.com

StarTech.com ICUSB232V2 Manual de usuario

StarTech.com

StarTech.com USBC3LINK Manual de usuario

StarTech.com

StarTech.com ST124HD20 Manual de usuario

StarTech.com

StarTech.com USB31CSAT3CB Manual de usuario

StarTech.com

StarTech.com ICUSB232FTN Manual del sistema

StarTech.com

StarTech.com ICUSB232V2 Manual de usuario

StarTech.com

StarTech.com PCMACLINK2 Manual de usuario

StarTech.com

StarTech.com USB2SATAIDE Manual de usuario

StarTech.com

StarTech.com ST122HD4KU Manual de usuario

StarTech.com

StarTech.com USB2SATAIDE Manual de usuario

StarTech.com

StarTech.com DPMDPHD2HD Manual de usuario

StarTech.com

StarTech.com ST224MX Manual de usuario

StarTech.com

StarTech.com SATRD60CM Manual de usuario

StarTech.com

StarTech.com POEKIT100 Manual de usuario

StarTech.com

StarTech.com ST122DVI Manual

StarTech.com

StarTech.com ICUSBCPLLD25 Manual de usuario

StarTech.com

StarTech.com ICUSBCPLLD25 Manual de usuario

StarTech.com

StarTech.com USB2LINK Manual de usuario

StarTech.com

StarTech.com 35BAYPANELBK Manual del sistema

StarTech.com

StarTech.com Spiral Cable-Management Sleeve - Black Manual de usuario

StarTech.com

StarTech.com SVID2USB23 Manual de usuario

StarTech.com

StarTech.com SVID2USB2 Manual de usuario

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

CYP

CYP PU-1H3HBTL Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario

Chauvet DJ

Chauvet DJ Data Stream 8 Manual de usuario