Spirit CE800 Manual de usuario

SPT0026 – CE800

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

OPERATING YOUR NEW ELLIPTICAL!

Z100 / Z300 Z500 Z700

OWNER’S MANUAL

Elliptical

CE800 Elliptical

Important Safety Instructions………………………………………………………….….……3

Important Operation Instructions……………………………………………………….….…..4

Assembly Instructions………………………………………………………………….….……7

Features………………………………………………………………………………………….11

Operation of Your Elliptical…………………………………………………………………….12

Maintenance……………………………………………………………………………………..24

Exploded View Diagram and Parts List………………………………………………..……..25

Manufacturer’s Limited Warranty………………………………………………..…………… 29

Thank you for purchasing our product, please save these instructions.

Please do not perform or attempt any customizing, adjustments, repair

or maintenance that is not described in this manual.

Table of Contents

CE800 Elliptical

Congratulations on your new elliptical and welcome to the Spirit family!

Thank you for your purchase of this quality elliptical from Spirit Manufacturing, Inc. Your new

elliptical was manufactured by one of the leading fitness manufacturers in the world and is backed

by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we

can to make your ownership experience as pleasant as possible for many years to come. If not

purchased direct from Spirit, the local dealership where you purchased this elliptical is your

administrator for all Spirit warranty and service needs. Their responsibility is to provide you with the

technical knowledge and service personnel to make your experience more informed and any

difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number,

and the date of purchase below to make any future, needed contact easy. We appreciate

your support and we will always remember that you are the reason that we are in business.

Please complete and mail your registration card today and enjoy your new elliptical.

Yours in Health,

BOYLES FITNESS Equipment Pty Ltd.

Name of Dealer______________________________________

Purchase Date_______________________________________

CE800 / SPT0026_ver.A

CE800 Elliptical

WARNING -

Read all instructions before assembling, using or servicing this appliance.

■Before beginning this or any exercise program, consult a physician. This is especially important

for persons over the age of 35 or persons with pre-existing health conditions.

■If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your

workout at once and consult a physician.

■To avoid muscular pain and strain, begin each workout by warming up and end it by cooling

down (slow pedaling at low resistance). Don’t forget to stretch at the end of the workout.

Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both

carpet and elliptical may result.

Keep children away from the elliptical. There are obvious pinch points and other

caution areas that can cause harm.

Keep hands away from all moving parts.

Never operate the elliptical if any of the parts are damaged. If the elliptical is not working

properly, call your dealer.

Never drop or insert any object into any openings.

Do not use outdoors.

Do not attempt to use your elliptical for any purpose other than for the purpose it is

intended.

The hand pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.

Max. user’s weight.: 150 kg

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

CE800 Elliptical

•Never operate the elliptical without reading and completely understanding the results of any

operational change you request from the computer.

•Do not use excessive pressure on console control keys. They are precision set to properly

function with little finger pressure. If you feel the buttons are not functioning properly with

normal pressure, contact your dealer.

•Do not attempt any servicing or adjustments other than those described in this manual. All

else must be left to trained service personnel familiar with electro-mechanical equipment and

authorized under the laws of the country in question to carry out maintenance and repair

work.

•Hold the handlebar for support when getting on or off the elliptical

•Make sure there is at least one meter of clearance between the elliptical and any fixed object.

•The safety level of this elliptical can only be ensured if you inspect all parts for signs of wear

or visible damage before each use. If a part is damaged, do not use the elliptical. Replace

any damaged parts immediately and keep the elliptical out of use until repair can be made.

•NEVER expose this elliptical to rain or moisture. This product is NOT designed for use

outdoors, near a pool or spa, or in any other high humidity environment. The operational

temperature specification is +10 to +40 degrees C, and humidity is 95%, non-condensing (no

water drops forming on surfaces).

•Place the elliptical on a firm, level surface. Place the elliptical on a protective surface to avoid

damaging the floor beneath the equipment.

•If the wattage reading on the console seems incorrect, see your local dealer for recalibration.

•The workload of this elliptical provides a speed-dependent type of exercise.

Important Operation Instructions

CE800 Elliptical

Assembly Pack Check List

#106 - 3/8” x 2-1/4”

Stainless Steel Bolt (4 pcs) #109 - 3/8”

Flat Washer (4 pcs)

#108 - 3/8”

Curved Washer (6 pcs)

#107 - 3/8” x 3-3/4” Stainless Steel Bolt (6 pcs)

#87 - 5/16”

Flat Washer (2 pcs)

#97 - 5/16” x 15mm

Bolt W / Loctite (2 pcs)

#103 - M6 x 15mm

Phillips Head Screw (2 pcs)

#78 - M5 x 12mm

Phillips Head Screw (14 pcs)

#76 - 5/16” x 3/4”

Hex head bolt (4 pcs)

Step1

#110 - M5 x 10mm

Phillips Head Screw

W / Loctite (8 pcs)

CE800 Elliptical

#75 - M8 x 25mm

Socket Cap Bolt (4 pcs)

#117 - 3/8”x 3/4”

Hex Head Bolt

W / Loctite (2 pcs)

#118 - M10

Nylon Nut (2 pcs

)

#119 - M10 x 38mm

Shoulder Bolt (2 pcs)

#120 - 3/8”

Flat Washer (2 pcs)

#113 - 3.5 x 12mm

Sheet Metal Screw (14 pcs)

#78 - M5 x 12mm

Phillips Head Screw (14 pcs)

Step3

#113 - 3.5mm x 12mm

Sheet Metal Screw (4 pcs)

tep2

#90 - 25mm

Wave Washer (2 pcs)

CE800 Elliptical

STEP 1: Rear Rail and Pedal Arm Assembly

•Slide the rail assembly (2) under the rear oval stabilizer tube of the main body. Bolt the two

together with two 3/8” x 2-1/4” bolts (106) and 3/8” washers (109) from the top of the tube,

and four 3/8” x 3-3/4” bolts (107) and 3/8” curved washers (108) through the front of the oval

stabilizer. Make sure all six bolts are tightened very securely.

•Attach the two footpads (48 left & 49 right) to the pedal mounting plates with eight M5 x

10mm screws (110).

•Assemble the pedal arm assemblies (5 & 6) to the crank axles of the main body. The

bearings in the pedal arms should slide onto the axles, do not force them because damage

to the bearings can occur. The pedal arms have been previously assembled at the factory to

assure the correct fit. Secure the pedal arms with two 5/16” x 15mm bolts (97) and 5/16”

washers (87).

•Install the two covers (45 right, 46 left) over the pedal arm connection at the axle with two M6

x 15mm screws (103). Install the two wheel covers (50) with four M5 x 12mm screws (78).

•Install the four mounting brackets (17) and (26) to the rails with four 5/16” x 3/4” bolts (76).

Install the two steel covers (15 right & 16 left) by lifting the pedal arms so the wheels are off

the tracks then slide the pedal arms, wheels first, through the opening of the steel cover.

Align the cover with the mounting brackets and secure them with eight M5 x 12 mm screws

(78). Install the four small covers (2 x #19 & 2 x #20) with ten M5 x 12mm screws (78).

•

Install the center aluminium step rail (72) with two 3/8” x 3-3/4” bolts (107) and curved

washers (108) at the rear and two 3/8” x 2-1/4” bolts (106) and flat washers (109) at the front.

Install the two stabilizer tube covers (64 left & 65 right) with two M5 x 12mm screws (78).

Assembly Instructions

CE800 Elliptical

STEP 2: Console Mast and Swing Arms

•Unravel the computer cable (30-15) and snake it through the bottom of the console mast (12)

and out the top. Secure the console mast to the main frame with four M8 x 25mm bolts (75).

Mount the console mast covers (61 left & 62 right) and secure with four 3.5mm x 12mm

screws (113).

•Install two wave washers (90) onto the console mast axle then Install the swing arms (10 left

& 11 right) onto the axles. Do not force them or use a hammer as damage to the bearings

can occur. The swing arms have been previously assembled at the factory to assure the

correct fit. Secure the arms with two 3/8” x 3/4” bolts (117) and 3/8” flat washers (120). Attach

the bottom of the swing arms to the rod ends of the pedal arms using two M10 x 38mm

shoulder bolts (119) and M10 nylon nuts (118).

Otros manuales para CE800

Tabla de contenidos

Otros manuales de Entrenador elíptico de Spirit

Spirit

Spirit XE395 Elliptical Manual de usuario

Spirit

Spirit Esprit EL355 Manual de usuario

Spirit

Spirit XE295 Manual de usuario

Spirit

Spirit XE395ENT Manual de usuario

Spirit

Spirit XE295 Manual de usuario

Spirit

Spirit XE295 Manual de usuario

Spirit

Spirit CE900ENT Manual de usuario

Spirit

Spirit XG200 Manual de usuario

Spirit

Spirit Inspire ZE30 Manual de usuario

Spirit

Spirit 161173195 Manual de usuario

Spirit

Spirit 161173395 Manual de usuario

Spirit

Spirit ESPRIT EL455 Manual de usuario

Spirit

Spirit CRS800 Manual de usuario

Spirit

Spirit Inspire ZE40 Manual de usuario

Spirit

Spirit XE 195 Manual de usuario

Spirit

Spirit 16611608000 Manual de usuario

Spirit

Spirit CE900ENT Manual de usuario

Spirit

Spirit 16117680US Manual

Spirit

Spirit XE500 Manual de usuario

Spirit

Spirit XE395 Elliptical Manual de usuario

Spirit

Spirit XE520s Manual de usuario

Spirit

Spirit Esprit EL255 Manual de usuario

Spirit

Spirit 350 Manual de usuario

Spirit

Spirit XE 125 Manual de usuario

Manuales populares de Entrenador elíptico de otras marcas

Weslo

Weslo Momentum 4.0 Elliptical Manual de operación y mantenimiento

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manual de usuario

Torque Fitness

Torque Fitness XPLLP Manual de usuario

Octane Fitness

Octane Fitness PRO3700C Manual de usuario

Xterra

Xterra FS5.8e Manual de usuario

Bodyguard

Bodyguard E-40 Manual de usuario

Bonn Germany

Bonn Germany Concept 2.2 Manual de usuario

Precor

Precor Resolute RSL 620 Manual de usuario

NordicTrack

NordicTrack E 9.2 Elliptical Manual de usuario

Vision Fitness

Vision Fitness X6600iNetTV Manual de usuario

Matrix

Matrix MX-A5x Manual de usuario

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manual de usuario

Sears

Sears FREE SPIRIT C249 30737 0 Manual de usuario

True

True FS-64 Manual de usuario

Sport-thieme

Sport-thieme ST 310 Manual de usuario

VIRTUFIT

VIRTUFIT CTR 1.1 Manual de usuario

Kettler

Kettler GIRO C 1 Manual de usuario

CIRCLE FITNESS

CIRCLE FITNESS E7 Manual de usuario