Soundcore Glow Mini Manual de usuario
At a Glance
Charging Your Speaker
• Use a certified USB-C cable and charger to prevent any damage.
• Fully charge this speaker before the first use to prolong the lifespan of the
built-in battery.
Bluetooth LED
USB-C Charging Port
Strap
Power Button
Power LED
LED Ring Light Button
Volume Down Button
Volume Up Button
PartyCast Button
Bluetooth Button
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Powering On / Off
Press Power On
Steady White
Press and Hold for 2 Seconds Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select
"soundcore Glow Mini" from the Bluetooth list to connect.
Glow Mini
Press Enter Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from
another connected device, pause the device that's currently active first.
• Each time you power on your speaker, it will automatically connect to your
last connected device if available within the Bluetooth range. If not, press the
Bluetooth button to enter Bluetooth pairing mode.
TWS Mode
Two identical Soundcore speakers can pair with each other for stereo sound. Both
speakers can play the same audio (one as the left channel and the other as the
right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth
button for 2 seconds on two speakers to enter TWS pairing mode.
1
2
Speaker 1
PAIRING
CONNECTED
Speaker 1Speaker 1/ Speaker 2
CONNECTED
Speaker 2
Speaker 1 Speaker 2
>2s
Press and Hold for 2 Seconds Enter TWS Pairing Mode
Flashing White TWS Pairing
Steady Blue (Speaker 1) TWS Connected
Steady White (Speaker 2)
• To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.
PartyCast Mode
With one speaker connected to a smartphone, press the PartyCast button on up
to 100 Soundcore speakers with PartyCast function to synchronize audio and light.
×1 ×1
21 3
Primary Speaker
PAIRING CONNECTEDPAIRING CONNECTED
Press Enter / Exit PartyCast Pairing Mode
Flashing White PartyCast Pairing
Steady White PartyCast Connected
Soundcore speakers with PartyCast function can also be connected with this speaker.
Light Modes
The body light on the speaker changes with the rhythm of the music. There are
5 preset music-sync light modes: Campfire Vibes / Neon Night / Spring Break /
Euphoric Dance / Romantic Stroll.
You can also check all available body light modes in the soundcore app.
Press Switch Light Modes
Press and Hold for 2 Seconds Turn off
Button Controls
Press and Hold for 2 Seconds Power On
Press and Hold for 2 Seconds Power Off
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press Answer / End a Call
Press and Hold for 2 Seconds Reject a Call
Press and Hold for 2 Seconds Activate Voice Assistant Software
Press Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit TWS Pairing Mode
Press Switch Light Modes
Press and Hold for 2 Seconds Turn off
Press Volume Up / Down
Press Enter / Exit PartyCast Pairing Mode
soundcore App
Download the soundcore app to enhance your experience.
soundcore
Apple and the Apple logo are trademarks of
Apple Inc.
Google Play and the Google Play
logo are
trademarks of Google Inc.
Product information: Check the product name and software version, or read the
user guide.
Firmware update: You will be informed once a new version of firmware is
detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons
on the speaker.
EQ settings: There are 4 preset EQ settings you can choose from in the app to
optimize your experience while enjoying different music genres.
• soundcore Signature: Standard EQ mode optimized for well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• BassUp: Turn on BassUp to enhance the low-frequency sound.
Set auto-power off time: Set an auto-power off time. The speaker will automatically
turn off when the time is up.
Light effects: Besides the music-sync light effects, you can also choose your favorite
light effects.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at
least 4 seconds to reset the speaker.
Specifications
DC Power Input 5V 1A
Battery Capacity 1800mAh/3.7V
Audio Output Power 8W
Speaker Driver 1.75" Full Range x1
Charging Time 3 Hours
Play Time (varies by volume level and
music content) Up to 12 Hours
Waterproof Level IP67
Bluetooth Version 5.3
Bluetooth Range 100m / 328ft
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Oradores de Soundcore
Soundcore
Soundcore Flare Manual de usuario
Soundcore
Soundcore Select Pro A3126 Manual de usuario
Soundcore
Soundcore Rave Manual de usuario
Soundcore
Soundcore Rave Neo Manual de usuario
Soundcore
Soundcore Motion X600 Manual de usuario
Soundcore
Soundcore Motion+ Manual de usuario
Soundcore
Soundcore Flare+ Manual de usuario
Soundcore
Soundcore Motion B Manual de usuario
Soundcore
Soundcore Strike 3 Manual de usuario
Soundcore
Soundcore Zero+ Manual de usuario
Soundcore
Soundcore Flare Mini Manual de usuario
Soundcore
Soundcore A3399 Manual de usuario
Soundcore
Soundcore Flare Mini 3 Manual de usuario
Soundcore
Soundcore Zero Manual de usuario
Soundcore
Soundcore Trance Go Manual de usuario
Soundcore
Soundcore Mini 3 Pro Manual de usuario
Soundcore
Soundcore Wakey Manual de usuario
Soundcore
Soundcore Icon Mini Manual de usuario
Soundcore
Soundcore Motion + B07X5TD8FN Manual de usuario
Soundcore
Soundcore Flare Mini Manual de usuario
