Soleus Air PSX-08-01 Manual de usuario

Portable Air Condioner

8,000 BTU • 10,000 BTU • 12,000 BTU • 14,000 BTU

OPERATING INSTRUCTIONS

PSX-08-01

PSX-10-01

V170216

PSC-12-01

PSC-14-01

3058080

Thank you for choosing a Soleus Air Portable Air Conditioner. This Owner’s Manual will provide

you with valuable information necessary for the proper care and maintenance of your new product.

Please take a few moments to thoroughly read the instructions and familiarize yourself with all the

operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the

store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: _____________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet

grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by

the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) Do not mix old and new batteries in the remote control.

IMPORTANT INSTRUCTIONS

PURCHASE INFORMATION

Model Number PSX-08-01 PSX-10-01 PSC-12-01 PSC-14-01

Cooling Capacity 8,000 BTU/Hr 10,000 BTU/Hr 12,000 BTU/Hr 14,000 BTU/Hr

Dehumidification 86 pts/Day 107 pts/Day 120 pts/Day 142 pts/Day

Cooling Power

Usage

938 Watts

8.2 Amps

1160 Watts

10.1 Amps

1385 Watts

12 Amps

1545 Watts

13.5 Amps

Air Flow 176 CFM 176 CFM 206 CFM 206 CFM

Power Source 115 V / 60 HZ 115 V / 60 HZ 115 V / 60 HZ 115 V / 60 HZ

Noise Level dB(A) 54 54 55 55

Product Weight 51.8 Lbs 54 Lbs 65 Lbs 66.1 Lbs

Operating

Temperature 61℉-88℉61℉-88℉61℉-88℉61℉-88℉

Product Dimension

(W x H x D) 17”×27.125”

×12.375”

17”.×27.125”

×12.375”

17.25”×28.375”×

14.875”

17.25”×28.375”×

14.875”

Refrigerant R-410A R-410A R-410A R-410A

Portable Air Conditioner (1)

Exhaust Hose (1)

Exhaust Hose Connector (1)

Window Kit Panel (3)

Window Kit Adapter (1)

Window Kit Adapter Grille (1)

Optional Window Kit Adapter Extension (1)

Wing Nut (2)

Optional Drain Tube (1)

Drain Tube Stopper (1)

Remote Control (1)

AAA Battery (2)

Owner’s Manual (1)

PACKAGE CONTENTS

SPECIFICATIONS

 The cooling capacity is measured at an ambient temperature of DB 95˚F, WB 83 ˚F.

 Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit

is in cooling mode.

 Power consumption is measured when the fan runs at the highest speed setting.

 These specifications are for reference only. For actual data, please refer to the rating label on

the back of the unit.

 If the environment temperature is higher than the max operating temperature or lower than the mini-

mum operating temperature, the air conditioner may not work properly.

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the

risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they

must be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any

exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet, the LED light will turn on.

2. Press TEST Button, circuit should trip, cutting power to the air conditioner. When this occurs,

the LED light will turn off.

3. Press RESET button to restore power to the unit. Once power is restored, the LED light will turn

on again.

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus N.A Customer Service for troubleshooting

recommendations.

Note: Your unit’s power cord may

differ from the one shown.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

POWER CORD AND PLUG

PRODUCT DIAGRAM

1. Control Panel

2. Manual Control Louver & Air Outlet

3. Carry Handle

4. Caster

5. Air Filter

6. Continuous Drain Port

7. Hot Air Discharge Opening

8. Air Intake Grille

9. Condensation Drain Hole

10. Exhaust Hose

11. Exhaust Hose Connector

12. Window Kit Adapter Grille

13. Window Kit Adapter

14. Optional Window Kit Adapter Extension

15. Window Kit Panels

16. Wing Nuts

17. Optional Drain Tube

18. Drain Tube Stopper

19. Remote Control

20. Batteries

21. Optional Window Security Pack

MODEL# PSX-08-01/PSX-10-01

1. Control Panel

2. Manual Control Louver & Air Outlet

3. Carry Handle

4. Caster

5. Air Filter

6. Continuous Drain Port

7. Hot Air Discharge Opening

8. Air Intake Grille

9. Condensation Drain Hole

10. Exhaust Hose

11. Exhaust Hose Connector

12. Window Kit Adapter Grille

13. Window Kit Adapter

14. Optional Window Kit Adapter Extension

15. Window Kit Panel

16. Wing Nuts

17. Optional Drain Tube

18. Drain Tube Stopper

19. Remote Control

20. Battery

21 Optional Window Security Pack

PRODUCT DIAGRAM MODEL# PSC-12-01/PSC-14-01

WINDOW VENTING KIT

OPTIONAL WINDOW SECURITY BRACKET

ASSEMBLY & INSTALLATION

When the unit is operating in air conditioning mode, the unit draws in indoor air and exhausts hot air out of the room

to complete the air exchange. The Window Kit must be installed when operating the unit in air conditioning, dehu-

midification. When the unit is operating in Fan Mode, no outdoor air exchange takes place. The window kit and ex-

haust hose do not need to be installed when the unit is used as a fan.

The supplied window kit can be installed in sliding windows and sliding glass doors up to 7 ft. long

(approximate length). When installed, be sure to keep the exhaust hose and short and straight as possible for

maximum efficiency.

PARTS & ASSEMBLY

WINDOW KIT ASSEMBLY

PORTABLE AIR CONDITIONER

The window venting kit must be installed in order for the unit to work correctly. The window venting kit has been de-

signed to fit into most vertical and horizontal window openings and sliding glass doors up to 7 feet..

2. Twist the Exhaust Hose Connector

onto Exhaust Hose.

1. Open the window or door to adjust the length of the Window

Kit Panels to fit the opening. If necessary, mark the kit and cut

one end down to properly fit the opening.

3. Twist the Exhaust Hose Connector over the discharge opening

on the back of the unit and extend the Exhaust Hose. (Keep the

exhaust hose as short and straight as possible)

4. Attach the Exhaust Hose to the Window Kit Adapter. Now connect

the Optional Window Kit Adapter Extension to the Window Kit Adapt-

er. Then attach the Optional Window Kit Adapter Extension to the

Window Kit panel. Close the window or door tightly.

WINDOW KIT INSTALLATION

Keep the exhaust hose

as short and straight as

possible for maximum

efficiency.

Optional Security Bracket Installation

Your Window Kit also includes an optional security bracket that can be installed to prevent the window from being

opened from the outside while a Window Kit is installed.

SECURITY BRACKET

Single and Double Hung Windows

Sliding Windows

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Soleus Air

Soleus Air

Soleus Air SA-50 Manual de usuario

Soleus Air

Soleus Air TTW-SLG Manual de usuario

Soleus Air

Soleus Air KFH-18 Manual de usuario

Soleus Air

Soleus Air PE2-07R-62 Manual de usuario

Soleus Air

Soleus Air WS1-05M2-02 Manual de usuario

Soleus Air

Soleus Air KY-34 Manual de usuario

Soleus Air

Soleus Air SG-WAC-10ESE-F Manual de usuario

Soleus Air

Soleus Air TM-PAC-08E3 Manual de usuario

Soleus Air

Soleus Air WS2-15E-201 Manual de usuario

Soleus Air

Soleus Air SG-TTW-09ESE-26 Manual de usuario

Soleus Air

Soleus Air HCC-C09H26-A Manual de usuario

Soleus Air

Soleus Air HCC-C09HP-A Manual de usuario

Soleus Air

Soleus Air WS4-06EW-201 Manual de usuario

Soleus Air

Soleus Air SG-TTW-10ESE Manual de usuario

Soleus Air

Soleus Air PE6-10R-03 Manual de usuario

Soleus Air

Soleus Air SG-WAC-06ESE Manual de usuario

Soleus Air

Soleus Air air-condition Manual de usuario

Soleus Air

Soleus Air GM-WAC-10ESE-C Manual de usuario

Soleus Air

Soleus Air 3119233 Manual de usuario

Soleus Air

Soleus Air SG-PAC-10E2 Manual de usuario

Soleus Air

Soleus Air PE3-09R-03 Manual de usuario

Soleus Air

Soleus Air SE-PAC-08E9 Manual de usuario

Soleus Air

Soleus Air KC-45H Hoja de especificaciones

Soleus Air

Soleus Air KFH-12/KFH-12-1 Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

McQuay

McQuay MCK020A Manual de usuario

Webasto

Webasto Frigo Top 25 DS Manual de usuario