Snell IQSDA32 Manual del operador

snellgroup.com

User Instruction Manual

IQSDA30/IQSDA32

Intelligent Reclocking High Performance HD-SDI/SD-SDI Distribution

Amplifiers

IQSDA30/IQSDA32 www.snellgroup.com Information and Notices

Information and Notices

information now allowed by statutory or judicial law or hereinafter granted, including without

limitation, material generated from the software programs which are displayed on the screen

such as icons, screen display looks etc.

Information in this manual and software are subject to change without notice and does not

represent a commitment on the part of Snell Limited. The software described in this manual is

furnished under a license agreement and can not be reproduced or copied in any manner

without prior agreement with Snell Limited or their authorized agents.

Reproduction or disassembly of embedded computer programs or algorithms prohibited.

No part of this publication can be transmitted or reproduced in any form or by any means,

electronic or mechanical, including photocopy, recording or any information storage and

retrieval system, without permission being granted, in writing, by the publishers or their

authorized agents.

Snell operates a policy of continuous improvement and development. Snell reserves the right

to make changes and improvements to any of the products described in this document

without prior notice.

Contact Details

Customer Support

For details of our Regional Customer Support Offices please visit the Snell website and

navigate to Support/Customer Support.

www.snellgroup.com/support/customer-support

Customers with a support contract should call their personalized number, which can be found

in their contract, and be ready to provide their contract number and details.

IQSDA30/IQSDA32 www.snellgroup.com Contents

Contents

Information and Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Module Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1.1 IQSDA30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1.2 IQSDA32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Order Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2.1 IQSDA30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2.2 IQSDA32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Rear Panel View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3.1 IQSDA30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3.2 IQSDA32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.4 Enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.1 B-style Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.2 A-style Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5 Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.5.1 IQSDA30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.5.2 IQSDA32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2. Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 IQSDA30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2 IQSDA32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3. Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1 IQSDA30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1.1 Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.1.2 Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.2 IQSDA32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.2.1 Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.2.2 Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4. Card Edge LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5. Controlling the IQSDA30/32 from the RollCall Control Panel . . . . . . . . . . . . . . . 17

5.1 Unit Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.2 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.2.1 Input 1 SDI Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.2.2 Output 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.2.3 Input 2 SDI Rate and Output 2 (IQSDA30 only). . . . . . . . . . . . . . . . . . . 19

5.3 Memory 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.4 Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.4.1 Log Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.5 RollTrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.5.1 Disable All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.5.2 RollTrack Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.5.3 RollTrack Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.5.4 RollTrack Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.5.5 RollTrack Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.5.6 RollTrack Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.5.7 RollTrack Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

IQSDA30/IQSDA32 www.snellgroup.com Contents

5.6 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.6.1 Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.6.2 Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.6.3 Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.6.4 Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.6.5 Input 1/2 Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6. Controlling the IQSDA30/32 from an Active Front Panel . . . . . . . . . . . . . . . . . . . 27

6.1 Information Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.2 Control Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

IQSDA30/IQSDA32 www.snellgroup.com Introduction

1. Introduction

1.1 Module Description

1.1.1 IQSDA30

The IQSDA30 provides dual inputs with 3 outputs per input for distribution of HD-SDI 3 Gbit/s,

1.5 Gbit/s or 270 Mbit/s SD-SDIsignals in a single width package. Its 80m 3G, 180m HD input

equalization performance and non re-clocking distribution of wide-band signals make it ideal

for all distribution applications. For HD/SD only applications an HD/SD-SDI version is

available, with an option to upgrade firmware for 3 Gbit/s operation when required.

1.1.2 IQSDA32

The IQSDA32 is a distribution amplifier for HD-SDI 3 Gbit/s, 1.5 Gbit/s or 270 Mbit/s SD-SDI

signals providing 7 equalized and reclocked outputs of the input in a single width package. Its

80m 3G, 180m HD input equalization performance and non re-clocking distribution of

wide-band signals make it ideal for all distribution applications. For HD/SD only applications

an HD/SD-SDI version is available, with an option to upgrade firmware for 3 Gbit/s operation

when required.

IQSDA30/IQSDA32 www.snellgroup.com Introduction

1.2 Order Codes

The following product order codes are covered by this manual.

1.2.1 IQSDA30

1.2.2 IQSDA32

Note:

Modules with “A” order codes (for example, IQSDA3047-1A)can be fitted into either A- or

B-style enclosures. Modules with “B” order codes (for example, IQSDA3047-1B)can only

be fitted into B-style enclosures. See page 8.

IQSDA3047-1A

IQSDA3047-1B Dual Channel HD/SD-SDI Reclocking Distribution Amplifier. 2 inputs,

3 outputs per input.

IQSDA3047-1A3

IQSDA3047-1B3 Dual Channel 3G/HD/SD-SDI Reclocking Distribution Amplifier.

2 inputs, 3 outputs per input.

IQSDA3061-1A3

IQSDA3061-1B3 Dual Channel 3G/HD/SD-SDI Re-clocking Distribution Amplifier with

relay input bypass. 2 inputs, 2 outputs per input.

IQSDA30-3G Upgrade for IQSDA30 Dual Channel HD/SD-SDI Reclocking

Distribution Amplifier to operate with 3 Gbit/s SDI signals.

IQSDA3247-1A

IQSDA3247-1B HD/SD-SDI Reclocking Distribution Amplifier. 1 input, 7 outputs.

IQSDA3247-1A3

IQSDA3247-1B3 3G/HD/SD-SDI Reclocking Distribution Amplifier. 1 input, 7 outputs.

IQSDA3261-1A

IQSDA3261-1B HD/SD-SDI Reclocking Distribution Amplifier. 1 input, 6 outputs,

relay bypass.

IQSDA3261-1A3

IQSDA3261-1B3 3G/HD/SD-SDI Reclocking Distribution Amplifier. 1 input, 6 outputs,

relay bypass.

IQSDA32-3G Upgrade for IQSDA32 HD/SD-SDI Reclocking Distribution Amplifier

to operate with 3 Gbit/s SDI signals.

IQSDA30/IQSDA32 www.snellgroup.com Introduction

1.3 Rear Panel View

The following rear panel types are available.

1.3.1 IQSDA30

IQSDA3047-1A(B) / IQSDA3047-1A(B)3

IQSDA3061-1A(B)3

1.3.2 IQSDA32

IQSDA3247-1A(B) / IQSDA3247-1A(B)3

IQSDA3261-1A(B) / IQSDA3261-1A(B)3

Note:

The input signal will bypass the module and be routed to the respective output in the event

of module removal or power failure.

Note:

The input signal will bypass the module and be routed to the respective output in the event

of module removal or power failure.

IQSDA30/IQSDA32 www.snellgroup.com Introduction

1.4 Enclosures

The module can be fitted into the enclosure types shown.

1.4.1 B-style Enclosure

Enclosure order codes: IQH3B-S-0, IQH3B-S-P

1.4.2 A-style Enclosures

Enclosure order code: IQH1A-S-P

Enclosure order codes: IQH3A-S-0, IQH3A-S-P

Enclosure order codes: IQH3A-E-0, IQH3A-E-P, IQH3A-0-0, IQH3A-0-P

Enclosure order code: IQH1A-S-P

Important:

Although IQ modules are interchangeable between enclosures, their rear panels are

enclosure specific. An IQH3B enclosure accepts modules with either “A” or “B” order

codes. An IQH3A or IQH1A enclosure accepts modules with “A” order codes only. See

page 6.

IQSDA30/IQSDA32 www.snellgroup.com Introduction

1.5 Feature Summary

The IQSDA30 and IQSDA32 provide the following features.

1.5.1 IQSDA30

• Dual channel Intelligent 3 Gbit/s SDI, HD-SDI and SD-SDI re-clocking distribution

amplifier

• Will distribute DVB-ASI and other wide-band signals

• Equalizes up to 80m at 3 Gbit/s, 180mat 1.5 Gbit/s and more than 350m at 270Mbit/s

when using Belden 1694A cable

• Standards supported:

• 3G-HD to SMPTE424M

• HD-SDI to SMPTE292M

• SD-SDI to SMPTE259M-C

• DVB-ASI

• Relay Bypass option available

• RollCall monitoring allows all signal paths to be managed

• Extremely compact – up to 32 channels in 3RU – for use where space is at a premium

1.5.2 IQSDA32

• Intelligent 3 Gbit/s SDI, HD-SDI and SD-SDI re-clocking distribution amplifier

• Will distribute DVB-ASI and other wide-band signals

• Equalizes up to 80m at 3 Gbit/s, 180mat 1.5 Gbit/s and more than 350m at 270Mbit/s

when using Belden 1694A cable

• Standards supported:

• 3G-HD to SMPTE424M

• HD-SDI to SMPTE292M

• SD-SDI to SMPTE259M-C

• DVB-ASI

• Relay Bypass option available

• RollCall monitoring allows all signal paths to be managed

IQSDA30/IQSDA32 www.snellgroup.com Technical Specification

2. Technical Specification

2.1 IQSDA30

Inputs and Outputs

Signal Inputs

SDI Inputs 2 x

Input Cable Length Up to 80 m Belden 1694A @ 3 Gbit/s

Up to 180 m Belden 1694A @ 1.5 Gbit/s

Up to 350 m Belden 1694A @ 270 Mbit/s

Signal Outputs

SDI Outputs x 3 per input

Controls

Indicators

Power OK (Green)

CPU OK (Green flashing)

Input 1 OK (Green), Bypass (Orange), Loss (Red)

Input 2 OK (Green), Bypass (Orange), Loss (Red)

RollCall Features

Input 1 (2) Rate Select Auto, 3G, HD, SD, DVB-ASI, Bypass (reclocking off)

Input Status Present, Loss, Unknown, Data Rate

Logging Input 1 (2) Type

Input 1 (2) Data Rate

Input 1 (2) Present

Input 1 (2) Error

Input 1 (2) Loss

RollTrack Controls On/Off, Index, Source, Address, Command, Status, Sending

Roll Track Outputs Unused

Input 1 (2) Present

Input 1 (2) Rate Unknown

Input 1 (2) Error

Input 1 (2) Loss

Input 1 (2) 3G

Input 1 (2) HD

Input 1 (2) SD

Other Controls

User Memories Name, save, and recall 16 user memories

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Amplificador de Snell

Snell

Snell IQSDA34 Manual del operador

Snell

Snell IQSDA31 Manual del operador

Snell

Snell IQFDA30 Manual del operador

Snell

Snell Power Amplifier SPA 200 Manual de usuario

Snell

Snell IQAES00 Manual de usuario

Snell

Snell VISTEK V6155 Manual del propietario

Snell

Snell Power Amplifier SPA 200 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario