Snell IQFDA30 Manual del operador

snellgroup.com

User Instruction Manual

IQFDA30

3G/HD/SD-SDI Re-clocking Distribution Amplifier with Fiber I/O

IQFDA30 www.snellgroup.com Information and Notices

Information and Notices

information now allowed by statutory or judicial law or hereinafter granted, including without

limitation, material generated from the software programs which are displayed on the screen

such as icons, screen display looks etc.

Information in this manual and software are subject to change without notice and does not

represent a commitment on the part of Snell Limited. The software described in this manual is

furnished under a license agreement and can not be reproduced or copied in any manner

without prior agreement with Snell Limited. or their authorized agents.

Reproduction or disassembly of embedded computer programs or algorithms prohibited.

No part of this publication can be transmitted or reproduced in any form or by any means,

electronic or mechanical, including photocopy, recording or any information storage and

retrieval system, without permission being granted, in writing, by the publishers or their

authorized agents.

Snell operates a policy of continuous improvement and development. Snell reserves the right

to make changes and improvements to any of the products described in this document

without prior notice.

Contact Details

Customer Support

For further details of our Regional Customer Support Offices, please visit the Snell website

and navigate to Support/Customer Support Contacts.

http://www.snellgroup.com/support/customer-support/customer-support/

Customers with a support contract should call their personalized number, which can be found

in their contract, and be ready to provide their contract number and details.

United Kingdom (HQ)

+44 (0) 118 921 4214 (tel)

+44 (0) 118 921 4268 (fax)

[email protected]

Regional Support Contacts

Snell USA

+1 818 556 2616 (tel)

+1 818 556 2626 (fax)

[email protected]

Snell Germany

+49 (0) 6122 98 43 0 (tel)

+49 (0) 6122 98 43 44 (fax)

[email protected]

Snell Spain

+34 91 446 23 07 (tel)

+34 91 446 17 74 (fax)

[email protected]

Snell France

+33 1 41 95 30 50 (tel)

+33 1 41 95 30 51 (fax)

[email protected]

Snell Asia Pacific

+852 2356 1660 (tel)

+852 2575 1690 (fax)

[email protected]

Snell India

+91 124 462 6000 (tel)

+91 124 437 5888 (fax)

[email protected]

Snell Russia

+7 499 248 3443 (tel)

+7 499 248 1104 (fax)

[email protected]

Snell China

+86 10 6515 6158 (tel)

+86 10 6515 5659 (fax)

[email protected]

IQFDA30 www.snellgroup.com Contents

Contents

Information and Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3 Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4 Order Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 Rear Panel View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.6 Enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.6.1 B-style Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.6.2 A-style Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2. Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.1 SDI Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2 SDI Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3 SFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4. Card Edge LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5. Operation Using the RollCall Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.1 Information Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.1.1 Unit Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.1.2 SFP Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.2 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.2.1 Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.2.2 Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.3 SFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.3.1 SFP Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.3.2 SFP Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.4 Memory 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.4.1 Recall Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.4.2 Save Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.4.3 Last Recalled Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.4.4 Save Memory Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.5 Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.5.1 Logging Misc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.5.2 Logging Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.5.3 Logging SFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.5.4 Log Field Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.6 RollTrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.6.1 Disable All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.6.2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.6.3 Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.6.4 Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.6.5 Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.6.6 RollTrack Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.6.7 RollTrack Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.7 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.7.1 Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.7.2 Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.7.3 Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.7.4 Input Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.8 SFP Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.8.1 Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.8.2 Configure Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

IQFDA30 www.snellgroup.com Introduction

1. Introduction

1.1 Description

The IQFDA30 provides HD-SDI 3 Gbit/s, 1.5 Gbit/s, or 270 Mbit/s SD-SDI inputs with both

SDI and Fiber optic outputs in a single-width package. Its 80m 3G, 170m HD, and 300m SD

input equalization performance and non re-clocking distribution of wide-band signals make it

ideal for all distribution applications.

1.2 Block Diagram

IQFDA30 www.snellgroup.com Introduction

1.3 Feature Summary

The IQFDA30 provides the following features:

• Single-channel 3 Gbit/s SDI, HD-SDI, and SD-SDI re-clocking distribution amplifier.

• Provides distribution for DVB-ASI and other wide-band signals.

• Equalizes up to 70 m at 3 Gbit/s, 170 m at 1.5 Gbit/s and 350 m at 270 Mbit/s when

using Belden 1694A cable.

• Standards supported:

• 3G-HD to SMPTE 424M

• HD-SDI to SMPTE 292M

• SD-SDI to SMPTE 259M-C

• DVB-ASI

• RollCall monitoring allows all signal paths to be managed.

1.4 Order Codes

The following product order codes are covered by this manual:

The following SFP modules are available for this product:

1.5 Rear Panel View

The following rear panel types are available:

IQFDA3000-1A(B)3

Note: Modules with “A” order codes (for example, IQFDA3000-1A3) can be fitted into eitherA- or

B-style enclosures. Modules with “B” order codes (for example, IQFDA3000-1B3) can only

be fitted into B-style enclosures. See page 6.

IQFDA3000-1A3

IQFDA3000-1B3 3G/HD/SD-SDI re-clocking distribution amplifier with fiber I/O. 1 SDI

input, 2 optical inputs/outputs, 4 SDI outputs.

FC1-13T1 1310 nm 1 TX

FC1-13T2 1310 nm 2 TX

FC1-15T1 1550 nm 1 TX

FC1-15T2 1550 nm 2 TX

FC1-R1 1 RX

FC1-TR 1 TX, 1 RX

IQFDA30 www.snellgroup.com Introduction

1.6 Enclosures

The module can be fitted into the enclosure types shown.

1.6.1 B-style Enclosure

Enclosure order codes: IQH3B-S-0, IQH3B-S-P

1.6.2 A-style Enclosures

Enclosure order code: IQH1A-S-P

Enclosure order codes: IQH3A-S-0, IQH3A-S-P

Enclosure order codes: IQH3A-E-0, IQH3A-E-P, IQH3A-0-0, IQH3A-0-P

Enclosure order code: IQH1A-S-P

Important: Although IQ modules are interchangeable between enclosures, their rear panels are

enclosure specific. An IQH3B enclosure accepts modules with either “A” or “B” order

codes. An IQH3A or IQH1A enclosure accepts modules with “A” order codes only. See

page 5.

Note: The IQH3B enclosure provides two internal analog reference inputs. These inputs are

applicable to modules with “B” order codes only.

IQFDA30 www.snellgroup.com Technical Specification

2. Technical Specification

Inputs and Outputs

Signal Inputs

SDI Inputs 1 x 3G/HD/SD-SDI

Connector / Format BNC / 75 Ohm panel jack on standard Snell connector panel

Conforms to video standards SMPTE 297-2006

SMPTE 424M (HD level A/B)

SMPTE 292M (HD)

SMPTE 259M-C (SD)

Input Cable Length Up to 70 m Belden 1694A @ 3 Gbit/s

Up to 170 m Belden 1694A @ 1.5 Gbit/s

Up to 350 m Belden 1694A @ 270 Mbit/s

Fiber Signal Input*

SDI Inputs 1

Optical 3 Gbit/s HD-SDI

1.485 Gbit/s HD-SDI

270 Mbit/s SD-SDI

Connector / Format LC singlemode

Conforms to SMPTE 297-2006

SMPTE 424M (HD level A/B)

SMPTE 292M (HD)

SMPTE 259M-C (SD)

Signal Outputs

SDI Outputs Up to 4, group selectable

Connector / Format BNC / 75 Ohm panel jack on standard Snell connector panel

Conforms to video standards SMPTE 297-2006

SMPTE 424M (HD level A/B)

SMPTE 292M (HD)

SMPTE 259M-C (SD)

Fiber Signal Output*

SDI Outputs Up to 2

Optical 3 Gbit/s HD-SDI

1.485 Gbit/s HD-SDI

270 Mbit/s SD-SDI

Connector / Format LC singlemode

Conforms to SMPTE 297-2006

SMPTE 424M (HD level A/B)

SMPTE 292M (HD)

SMPTE 259M-C (SD)

*Dependant on SFP fitted

IQFDA30 www.snellgroup.com Technical Specification

Controls

Indicators

Power OK (Green)

CPU OK (Green flashing)

Input 1 OK (Green), Bypass (Orange), Loss (Red)

Rx 1 OK (Green), Bypass (Orange), Loss (Red)

RollCall Functions

Video Controls

Input 1 Format Select SDI, Rx

Laser Disable On/Off

Input 1 Auto, 3G, HD, SD, DVB-ASI, Bypass (re-clocking off)

Input Status Present, Loss, Unknown, Data Rate

Other Controls

User Memories Name, save, and recall 16 user memories

Memory Naming User configurable naming of memories 1–16

Information Window Unit Status, SFP Status

Logging Input 1 Type

Input 1 Data Rate

Input 1 Present

Input 1 Error

Input 1 Loss

Optical Logging Tx Laser Bias High Warning

Tx Power Low Warning

Tx Power High Warning

Laser Wavelength Input 1 Rx Power High Warning

Input 1 Rx Power Low Warning

Input 1 Rx Power Measurement

RollTrack Index Up to 16 RollTrack destinations

RollTrack Controls On/Off, Index, Source,Address, Command, Status, Sending

Roll Track Sources Unused, Input Present, Input Loss, Input Bitrate, Fiber Tx Bias OK, Fiber

Tx Bias High, Fiber Tx Bias Low, Fiber Rx Power OK, Fiber Rx Power

High, Fiber Rx Power Low

Factory Default Resets all module settings to factory specified default values and clears

memories

Resets all module settings to factory specified default values but does not

clear memories

Restart Software restart of the module

Module Information Reports the following module information: Software Version, Serial

Number, Build Number, KOS Version, Firmware Version, PCB Version

Specifications

Electrical 3 Gbit/s SDI, SMPTE 424M

1.5 Gbit/s HD-SDI, SMPTE 292M

270 Mbit/s SDI, SMPTE 259M-C / DVB-ASI

Connector / Format BNC/ 75 Ohm

Standard Snell screw terminal

LC singlemode SFP

IQFDA30 www.snellgroup.com Technical Specification

Return Loss >-15 dB (270 Mbit/s, 1.5 Gbit/s)

>-10 dB (3 Gbit/s)

Output Jitter SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)

3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)

Optical 1310 nm Tx

Wavelength 1310 nm

Spectral Width (FWHM) >1.5 nm (typical)

Output Power 0 to -5 dBm (-2 dBm typical)

Rise and Fall Time 135 ps @ 3 Gbit/s

270 ps @ 1.5 Gbit/s

1.5 ns @ 270 Mbit/s

Extinction Ratio >7.5:1 (typical)

Optical Return Loss -27 dB

Link Distance Up to 30 Km @ 3 Gbit/s

Up to 21 Km @ 1.5 Gbit/s

Up to 10 Km @ 270 Mbit/s

Optical Rx

Input Wavelength Range 1260 nm (min.), 1620 nm (max.)

Input Sensitivity -21 dBm

Optical Power Input Range >0 dBm, <-20 dBm

Link Distance Up to 30 Km @ 3 Gbit/s

Up to 21 Km @ 1.5 Gbit/s

Up to 10 Km @ 270 Mbit/s

Power Consumption

Module Power Consumption 4 W Max (A frames)

4 PR Max (B frames)

IQFDA30 www.snellgroup.com Connections

3. Connections

This section describes the physical input and output connections provided by the IQFDA30.

3.1 SDI Input

3.2 SDI Outputs

3.3 SFP

Serial digital input is made to the unit via a

BNC connector which terminates in 75 Ohms.

Serial digital outputs from the unit are made

via four BNC connectors which terminate in

75 Ohms.

An SFP cage provides a range of connectivity

options.

Tabla de contenidos

Otros manuales de Amplificador de Snell

Snell

Snell IQSDA31 Manual del operador

Snell

Snell Power Amplifier SPA 200 Manual de usuario

Snell

Snell Power Amplifier SPA 200 Manual de usuario

Snell

Snell IQAES00 Manual de usuario

Snell

Snell IQSDA32 Manual del operador

Snell

Snell IQSDA34 Manual del operador

Snell

Snell VISTEK V6155 Manual del propietario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario