SMC Networks WiShare SMCWTVA100 Manual de usuario

IEEE

802.11a/

b/g/n

WLAN

11n Dual Band Dongle

USER’S GUIDE

VERSION 1.0

All trade names are registered trademarks of respective manufacturers listed.

This manual may not be copied in any media or form withou

the written consent of original maker.

SMC

SMCWTVA100

Intel WiDi adapter(具無線功能)

1. Introduction .........................................................……...... 1

2. Wireless LAN Basics ................................................……...... 3

3. IP ADDRESS ..........................................................………….. 4

4. Install Driver Utility ...............................................………….. 5

4.1 Windows XP Vista 7................................................... 5

5. Wireless Network Configuration ............................................ 7

5.1 Utility Icon .............................................................. 7

5.2 Client Mode (Default Setting)........................................ 7

6. Technical Specifications ................................................ .. . 14

7. Troubleshooting .............................................................. 16

8. Glossary ....................................................................... 17

Thank you for your purchase of the WLAN Adapter. Featuring wireless

technology, this wireless networking solution has been designed for both

large and small businesses, and it is scalable so that you can easily add

more users and new network features depending on your business scale.

FEATURES

upport Microsoft XP(32bit/64bit) / Vista(32bit/64bit) / 7(32bit/64bit)

Operating distance of up to 300 meters in free space.

300/270/240/180/120/90/60/54/48/36/30/24/22/18/12/11/6/5.5/2/1

Mbps selectable Data Rate according to client adapter default

antennas.

64/128-bit WEP , WPA, WPA2, WP

2.400GHz ~ 2.4835GHz unlicensed I M Frequency Band. Modulation

Method. 5GHz UNII, Midband, I M bands.

IEEE 802.11b : D (Direct equence pread pectrum).

IEEE 802.11a/g n : OFDM (Orthogonal Frequency Division

Multiplexing).

Easy operation and setting up.

SYSTEM REQUIREMENTS

Windows ystem : XP(32bit/64bit) / Vista(32bit/64bit) / 7(32bit/64bit).PCs

must have a device driver installed. It allows you to communicate with

WLAN 11n U B Client Adapter.

BEFORE YOU START

1. Confirm Box Contents

WLAN 11n U B Client Adapter

Quick tart Guide

Driver CD

CONNECTING YOUR WLAN 11n USB C ient Adapter TO PC

Quick tart Guide

Connect your WLAN 11n U B Client Adapter to your PC. Install driver.

GETTING TO KNOW WIRELESS LAN ADAPTER

LED Status

ON – Adapter connects to remote.

BLINKING - WLAN Adapter is active.

Wireless LAN network defined by IEEE 802.11a/b/g standard committee

could be configured as :

Ad Hoc wire ess LAN.

Infrastructure wire ess LAN.

Ad Hoc network is a group of PCs installed with wireless LAN cards, this group

of PCs is called a B (Basic ervice et). PCs in this group can use their

wireless LAN cards to communicate with each other, but can not

connect to the Internet.

Ad Hoc Wireless Network Infrastructure Wireless Network

The most obvious difference between Infrastructure wireless network and Ad

Hoc wireless network is that the PCs in Infrastructure wireless network can

access the resource in the Internet through Access Point.

Depending on your requirement, you can easily set up your PC’s network to be

a “Ad Hoc” or “Infrastructure” wireless network. Generally speaking, if in your

network, there is an Access Point in it, we recommend you to set your

network as an “Infrastructure”, so it can connect to the Internet.

To use the WLAN 11n U B Client Adapter with a computing device, the WLAN

Adapter must be equipped with a proper Interface. All drivers and supporting

software for the WLAN Adapter must be installed and configured first.

Ask your system administrator for the following information, which

you may need to provide during driver installation :

Your Wireless Client Name.

Your Wireless ID.

Your computer’s unique client name and workgroup name. For your

network account, your user name and password.

Your IP address, gateway address, and subnet mask if you’re not

using a DHCP client.

Any computer on a network is identified by a unique network address. There

are two methods to assign a network address to a computer on a TCP/IP

network :

tatic IP addressing.

Dynamic IP addressing (DHCP Client).

In network with static IP addressing, the network administrator manually

assigns an IP address to each computer. Once a static IP address is assigned,

a computer uses the same IP address every time it reboots and logs on to the

network. You may manually change the IP address in the

Network Properties

dia og box.

Network using static IP address is easy to set up and do not

require additional network management software

In network with dynamic IP addressing, a DHCP server in the network

dynamically assigns IP addresses to all clients every time they log on to the

network. Network using dynamic IP address requires setting up and running a

DHCP erver.

The installation & driver CD will automatically activate the autorun installation

program after you insert the disk into your CD drive.

Step 1 :

Insert the installation CD into your

CD-ROM. Choose the etup

Language and click Next button.

Step 2 :

Installation descriptions shown. Click

Next to continue.

Click Insta to begin the installation

Installing & configuring WLAN utility

Installing Drivers.

Step 3 :

Click Finish to complete installation

WLAN 11n U B Client Adapter uses its own management software. All

functions controlled by users are provided by this application. When you insert

the WLAN Adapter into your laptop or desktop, a icon should appear in the

Windows ystem Tray automatically.

5.1 Uti ity Icon

▓

Client mode utility running but no WLAN Adapter plugged

▓

Client mode utility running and WLAN Adapter scan available network.

▓

Client mode utility running and WLAN Adapter can not scan any AP

5.2 C ient Mode (Defau t Setting)

Wire ess Device Contro :

▓

how Tray Icon – how icon or not show icon in system tray.

▓

Radio Off – top wireless signal.

▓

Disable Adapter – top wireless device.

▓

Virtual WiFi disallowed – oft AP off

5.2.1 GENERAL SETTING

Once device is set,

double click on that

icon and the

configuration window

will pop up as shown.

It shows the current

connected network.

The signal strength

and link quality are

displayed also.

The bar graph

displays the quality and strength of the link between the node and its

Access Point. Link Quality is a measurement of receiving and

transmitting performances over the radio.

Network Address displays current MAC Address, IP Address,

ubnet. and Gateway.

Click Renew IP button to refresh IP address leased from wireless

AP.

5.2.2 PROFILE SETTING

In profile tab, you can

Add,Remove,Edit,

Dup icate and Set

Defau t to manipulate

profile content

manually. trongly

recommend to use

profile after you do

Avai ab e Network.

Otros manuales para WiShare SMCWTVA100

Tabla de contenidos

Otros manuales de Adaptador de SMC Networks

SMC Networks

SMC Networks EZ Connect N SMCWUSB-N2 Manual de usuario

SMC Networks

SMC Networks EZ Connect G SMC2835W Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2635W Manual de usuario

SMC Networks

SMC Networks 2209USB/ETH Manual de usuario

SMC Networks

SMC Networks WiShare SMCWTVA100 Manual de usuario

SMC Networks

SMC Networks SMC EZ Connect N Draft 11n Wireless Cardbus Adapter... Manual de usuario

SMC Networks

SMC Networks EZ Connect SMCHPAVH-ETH Manual de usuario

SMC Networks

SMC Networks SMCWCB-GM Manual de usuario

SMC Networks

SMC Networks SMCWPCIT-G Manual de usuario

SMC Networks

SMC Networks Tiger Card SMC10GPCIE-XFP Manual de usuario

SMC Networks

SMC Networks SMCWUSB-G Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2671W Manual de usuario

SMC Networks

SMC Networks SMC EZ Connect g SMCWUSB-G Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2670W Manual de usuario

SMC Networks

SMC Networks WUSB-N2 Manual de usuario

SMC Networks

SMC Networks EZ Connect N SMCWUSBS-N4 Manual de usuario

SMC Networks

SMC Networks EZ Connect G SMC2835W Manual de usuario

SMC Networks

SMC Networks SMCWCB-G Manual de usuario

SMC Networks

SMC Networks WUSB-N2 Manual de usuario

SMC Networks

SMC Networks 5MC2671W Manual de usuario

SMC Networks

SMC Networks EZ Connect g SMCWUSBT-G2 Manual de usuario

SMC Networks

SMC Networks SMCWUSB-G Manual de usuario

SMC Networks

SMC Networks 2208USB/ETH - annexe 1 Manual de usuario

SMC Networks

SMC Networks SMC-BT10 EZ Connect Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario