SMC Networks WUSB-G2 FICHE Manual de usuario

EZ Connect™g

2.4GHz 802.11g Wireless USB2.0 Adapter

SMCWUSB-G2

LIMITED WARRANTY

Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free

from defects in workmanship and materials, under normal use and service, for the

applicable warranty term.All SMC products carry a standard 90-day limited warranty from

the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion,

repair or replace any product not operating as warranted with a similar or functionally

equivalent product, during the applicable warranty term. SMC will endeavor to repair or

replace any product returned under warranty within 30 days of receipt of the product. The

standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering

new products within 30 days of purchase from SMC or itsAuthorized Reseller.

Registration can be accomplished via the enclosed product registration card or online via

the SMC website. Failure to register will not affect the standard limited warranty. The

Limited Lifetime warranty covers a product during the Life of that Product, which is defined

as the period of time during which the product is an “Active” SMC product. A product is

considered to be “Active” while it is listed on the current SMC price list. As new

technologies emerge, older technologies become obsolete and SMC will, at its discretion,

replace an older product in its product line with one that incorporates these newer

technologies. At that point, the obsolete product is discontinued and is no longer an

“Active” SMC product. Alist of discontinued products with their respective dates of

discontinuance can be found at:

http://www.smc.com/index.cfm?action=customer_service_warranty.

All products that are replaced become the property of SMC. Replacement products may

be either new or reconditioned. Any replaced or repaired product carries either a 30-day

limited warranty or the remainder of the initial warranty, whichever is longer. SMC is not

responsible for any custom software or firmware, configuration information, or memory

data of Customer contained in, stored on, or integrated with any products returned to SMC

pursuant to any warranty. Products returned to SMC should have any customer-installed

accessory or add-on components, such as expansion modules, removed prior to returning

the product for replacement. SMC is not responsible for these items if they are returned

with the product. Customers must contact SMC for a Return MaterialAuthorization

number prior to returning any product to SMC. Proof of purchase may be required. Any

product returned to SMC without a valid Return Material Authorization (RMA) number

clearly marked on the outside of the package will be returned to customer at customer’s

expense. For warranty claims within North America, please call our toll-free customer

support number at (800) 762-4968. Customers are responsible for all shipping charges

from their facility to SMC. SMC is responsible for return shipping charges from SMC to

customer.

WARRANTIES EXCLUSIVE: IFAN SMC PRODUCT DOES NOT OPERATEAS

WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE ANDARE IN LIEU OF

ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN

FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. SMC NEITHERASSUMES NOR AUTHORIZES ANY OTHER

PERSON TOASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE

SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL

NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION

DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS

CAUSED BY

CUSTOMER’S ORANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER

INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY

OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BYACCIDENT,

FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR

TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL,

CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR

FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS

ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS

PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOTALLOW THE

EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THEABOVE

LIMITATIONS AND EXCLUSIONS MAY NOTAPPLY TOYOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL

RIGHTS, WHICH MAY VARYFROM STATE TO STATE. NOTHING IN THIS WARRANTY

SHALL BE TAKEN TOAFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the active

SMC price list. Under the limited lifetime warranty, internal and external power supplies,

fans,

and cables are covered by a standard one-year warranty from date of purchase.

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

iii

Compliances

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, (example - use only shielded interface

cables when connecting to computer or peripheral devices) any changes or modifications

not expressly approved by the party responsible for compliance could void the user’s

authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

IMPORTANT NOTE

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

CE Mark Declaration of Conformance for EMI and Safety (EEC)

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.

The following references have been applied in order to prove presumption of compliance

with the R&TTE Directive 1999/5/EC:

• EN 300 328

• EN 301 489-1

• EN 301 489-17

• EN 60950-1

A copy of the CE Declaration of Conformity is available for download at:

http://www.smc.com

Intended for indoor use in the following countries:

AT, BE, CZ, CY, DK, EE, FI, FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL,

PT, SI, SK, ES, SE, CH, UK.

Table of Contents

Package Contents..............................................................................................................1

Chapter 1 Introduction.......................................................................................................2

1.1 Key Features ..................................................................................................2

1.2 LED Status......................................................................................................2

1.3 System Requirements ....................................................................................2

1.4 Wireless LAN Networking...............................................................................3

Chapter 2 Installation Guide..........................................................................................6

2.1 Before You Begin............................................................................................6

2.2 Installing the Drivers.......................................................................................6

Chapter 3 Uninstall Guide ...........................................................................................11

3.1 Through Control Panel..................................................................................11

3.2 Through Programs Menu..............................................................................12

Chapter 4 Software Configuration..............................................................................15

4.1 Station Mode Configuration ..........................................................................15

4.1.1 More Setting.........................................................................................15

4.1.1.1 General Connection Setting ..........................................................15

4.1.1.2 WEP Encryption ............................................................................19

4.1.1.3 WPA/WPA2 Authentication with TKIP/AES Encryption..................20

4.1.1.4 WPA-PSK Authentication...............................................................23

4.1.1.5 Profiles ..........................................................................................23

4.1.1.6 Advanced Settings ........................................................................24

Chapter 5 Example configuration...............................................................................26

5.1 Configuration of WEP Encryption .................................................................26

Appendix A: Glossary......................................................................................................28

Appendix B: Specifications.............................................................................................30

Package Contents

Open the package carefully, and make sure that none of the items listed below are missing:

•EZ Connect™ g 802.11g Wireless USB2.0Adapter (SMCWUSB-G2)

•EZ Installation Wizard & Documentation CD

•Quick Installation Guide

•Warranty Information Card

Chapter 1 Introduction

The SMCWUSB-G2 is a USB 2.0 pen-size wireless adapter supporting IEEE 802.11b/g 2.4GHz

radio operation. It provides high-speed wireless connection with data rate up to 54Mbps.

Additionally, wireless roaming allows the user to move among different AP without losing the

current connection. The adapter provides excellent security features including WPA and WPA2.

Featuring high performance transmission rates, simple installation and adaptability, as well as

strong security the SMCWUSB-G2 is the perfect solution for small office and home needs.

1.1 Key Features

•Complies with IEEE802.11b and IEEE 802.11g standards.

•Wireless speeds up to 54Mbps

•WEP 64-/128-Bit, WPA & WPA2 wireless encryption

•High speed USB 2.0 interface

•Supports Windows 98, ME, 2000, XP and Vista

•SimulatedAP Mode for supporting PSP connection

•WLAN management utility

•EZ Installation Wizard for easy installation

1.2 LED Status

The following table describes the LED behavior:

COLOR STATUS DESCRIPTION

OFF No power

ON Wireless connected without data traffic

Blinking Wireless connected with data traffic

Green

1.3 System Requirements

The following are the minimum system requirements in order to install and use the

SMCWUSB-G2:

•2.4 GHz 802.11b/g wireless network

•Microsoft Windows 98SE, ME, 2000, XP or Vista

•A Notebook or Desktop computer with:

o300MHz CPU or above

oAvailable USB2.0 port

o20MB of available hard disk space

oCD-ROM drive

1.4 Wireless LAN Networking

Wireless LAN networking works in either of the two modes: ad-hoc and infrastructure. In

infrastructure mode, wireless devices communicate to a wired LAN via access points. Each

access point and its wireless devices are known as a Basic Service Set (BSS). An Extended

Service Set (ESS) is two or more BSSs in the same subnet. In ad hoc mode (also known as

peer-to-peer mode), wireless devices communicate with each other directly and do not use an

access point. This is an Independent BSS (IBSS).

To connect to a wired network within a coverage area using access points, set the adapter

operation mode to Infrastructure (BSS). To set up an independent wireless workgroup without

an access point, use Ad-hoc (IBSS) mode.

AD-HOC (IBSS) NETWORK

Ad-hoc mode does not require an access point or a wired network. Two or more wireless

stations communicate directly to each other. An ad-hoc network may sometimes be referred to

as an Independent Basic Service Set (IBSS).

To set up an ad-hoc network, configure all the stations in ad-hoc mode. Use the same SSID

and channel for each.

When a number of wireless stations are connected using a single access point, you have a

Basic Service Set (BSS).

In the ESS diagram below, communication is done through the access points, which relay

data packets to other wireless stations or devices connected to the wired network. Wireless

stations can then access resources, such as a printer, on the wired network.

Otros manuales para WUSB-G2 FICHE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Adaptador de SMC Networks

SMC Networks

SMC Networks 2336W-AG Manual de usuario

SMC Networks

SMC Networks SMCWPCIT-G Manual de usuario

SMC Networks

SMC Networks SMC EZ Connect N Pro Draft 11n Wireless CardBus Adapter... Manual de usuario

SMC Networks

SMC Networks SMCWAPS-G Manual de usuario

SMC Networks

SMC Networks EZ Connect N SMCWUSB-N2 Manual de usuario

SMC Networks

SMC Networks SMCWAPS-G Manual de usuario

SMC Networks

SMC Networks EZ Connect Powerline SMCHPAV-ETH2 Manual de usuario

SMC Networks

SMC Networks SMC2336W-AG Manual de usuario

SMC Networks

SMC Networks SMCWPCI-GM Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2735W Manual de usuario

SMC Networks

SMC Networks SMC EZ Connect g SMCWCBT-G Manual de usuario

SMC Networks

SMC Networks SMC2862W-G EZ Connect Manual de usuario

SMC Networks

SMC Networks SMC-BT10 EZ Connect Manual de usuario

SMC Networks

SMC Networks -GT1255FTX-SC Manual de usuario

SMC Networks

SMC Networks WUSB-N2 Manual de usuario

SMC Networks

SMC Networks SMC2862W-G EZ Connect Manual de usuario

SMC Networks

SMC Networks Tiger Card SMC10GPCIE-XFP Manual de usuario

SMC Networks

SMC Networks WiShare SMCWTVA100 Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2635W Manual de usuario

SMC Networks

SMC Networks 802.11g Manual de usuario

SMC Networks

SMC Networks EZ Networking SMC2208USB/ETH Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2602W Manual de usuario

SMC Networks

SMC Networks EZ Connect Powerline SMCHPAV-ETH Manual de usuario

SMC Networks

SMC Networks SMCWUSB-G Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario