Silvercrest SPB 10000 A1 Manual de usuario

IAN 271911

POWER BANK SPB 10000 A1

POWER BANK

Operating instructions

MOBILNA BATERIJA POWERBANK

Navodila za uporabo

TÖLTŐ

Használati utasítás

POWERBANK

Instrukcja obsługi

POWERBANK

Bedienungsanleitung

POWERBANK

Návod k obsluze MOBILNÁ NABÍJAČKA

Návod na obsluhu

GB Operating instructions Page 1

PL Instrukcja obsługi Strona 13

HU Használati utasítás Oldal 25

SI Navodila za uporabo Stran 37

CZ Návod k obsluze Strana 49

SK Návod na obsluhu Strana 61

DE/AT/CH Bedienungsanleitung Seite 73

Before reading, unfold the page containing the illustrations and familiarise yourself with all func-

tions of the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z

wszystkimi funkcjami urządzenia.

Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik

funkcióját.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

IAN 271911

POWER BANK SPB 10000 A1

POWER BANK

Operating instructions

MOBILNA BATERIJA POWERBANK

Navodila za uporabo

TÖLTŐ

Használati utasítás

POWERBANK

Instrukcja obsługi

POWERBANK

Bedienungsanleitung

POWERBANK

Návod k obsluze MOBILNÁ NABÍJAČKA

Návod na obsluhu

GB │ 1 ■

SPB 10000 A1

Contents

Introduction.............................................. 2

Information concerning these operating instructions .........................2

Notes on trademarks .................................................2

Intended use .......................................................2

Warnings used......................................................3

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Basic safety guidelines................................................3

Descriptions of components ................................. 5

Operation ............................................... 5

Check the package contents ...........................................5

Disposal of packaging materials ........................................6

Charging the Power Bank .............................................6

Checking the charge level .............................................7

Handling and operation.................................... 7

Charging mobile devices with the Power Bank .............................7

Troubleshooting .......................................... 8

Cleaning................................................. 9

Storage when not in use ................................... 9

Disposal ................................................. 9

Disposal of the device ................................................9

Appendix............................................... 10

Technical data .....................................................10

Notes on the Declaration of Conformity .................................11

Warranty.........................................................11

Service...........................................................12

Importer ..........................................................12

■ 2 │ GB SPB 10000 A1

Introduction

Information concerning these operating instructions

Congratulations on the purchase of your new device. You have selected

a high-quality product. The operating instructions are part of this product.

They contain important information on safety, usage and disposal. Before

using the product, familiarise yourself with all operating and safety instruc-

tions. Use the product only as described and for the speciﬁed areas of

application. Keep these operating instructions in a safe place. Please also

pass on these operating instructions to any future owner.

This documentation is protected by copyright. Any copying or reproduc-

tion, including in the form of extracts, or any reproduction of images (even

in a modiﬁed state), is permitted only with the written authorisation of the

manufacturer.

Notes on trademarks

USB®is a registered trademark of USB Implementers Forum, Inc.

All other names and products may be trademarks or registered trademarks

of their respective owners.

Intended use

This device is an information technology device and is intended exclusively

for charging mobile devices that are charged via a USB port as standard.

The device is not intended for any other purpose, nor for use beyond the

scope described. The device is not intended for use in commercial or indus-

trial environments. The manufacturer accepts no responsibility for damage

caused by failure to observe these instructions, improper use or repairs,

unauthorised modiﬁcations or the use of unapproved replacement parts.

The risk shall be borne solely by the user.

GB │ 3 ■

SPB 10000 A1

Warnings used

The following warning notice types are used in these operating

instructions:

DANGER

A warning notice at this hazard level indicates an immi-

nently hazardous situation.

If the hazardous situation is not avoided, it could result in death or

serious physical injury.

► Follow the instructions in this warning notice to avoid the risk of

death or serious injury.

CAUTION!

A warning notice at this hazard level indicates a potential

for property damage.

Failure to avoid this situation could result in property damage.

► Follow the instructions in this warning notice to prevent property

damage.

NOTE

► A note provides additional information that will assist you in using

the device.

Safety

This section contains important safety instructions for using the device. This

device complies with statutory safety regulations. Improper use may result

in personal injury and property damage.

Basic safety guidelines

■ This device may be used by children aged 8 years and above and by per-

sons with limited physical, sensory or mental capabilities, or lack of expe-

rience and knowledge, provided that they are under supervision or have

been told how to use the device safely and are aware of the potential

risks. Children must not use the device as a plaything. Cleaning and user

maintenance tasks may not be carried out by children unless they are su-

pervised.

■ Check the device for visible external damage before use. Do not operate

an device that has been damaged or dropped.

■ 4 │ GB SPB 10000 A1

■ Always place the device on a stable and level surface. It can be damaged

if dropped.

■ Do not expose the device to direct sunlight or high temperatures. Other-

wise it may overheat and be irreparably damaged.

■ Do not place the product near heat sources such as radiators or other heat-

generating devices.

■ Do not operate the device close to naked ﬂames (e.g. candles).

■ The device is not designed for use in rooms with high temperatures or humidity

(e.g. bathrooms) or where there is excessive dust.

■ Never expose the device to extreme heat. This particularly applies to storage

in a car. Extreme temperatures can occur in car interiors and glove compart-

ments during long periods of immobilisation. Remove electrical and electronic

devices from the vehicle.

■ Do not use the device immediately after moving it from a cold room to a

warm room. Always allow the device to acclimatise before switching it on.

■ DANGER! Never open the housing of the device. There are no user-

serviceable or replaceable components inside the device.

■ Do not make any unauthorised modiﬁcations or alterations to the device.

■ All repairs must be carried out by authorised specialist companies or by

the Customer Service department. Improper repairs may put the user at

risk. It will also invalidate any warranty claims.

■ Do not expose the device to water spray or dripping water, and do not

place liquid-ﬁlled objects such as vases or open drink containers on or

near the device.

■ Switch the device oﬀ immediately and disconnect any connected charging

cables from the device if you smell fumes or notice any smoke. Have the

device checked by a qualiﬁed specialist before using it again.

■ If you are using a USB power supply, the mains socket used must always

be easily accessible so that the USB power supply can be quickly discon-

nected from the socket in a hazardous situation. You should also observe

the operating instructions for the USB power supply.

■ DANGER! Mishandling the batteries can cause ﬁres, explosions, leak-

ages or other hazards! Do not throw the device into a ﬁre, since the inte-

grated battery may explode.

■ Comply with all restrictions or prohibitions on use for battery-powered

devices in locations with speciﬁc hazard risks, such as petrol stations,

aeroplanes, hospitals, etc.

■ DANGER! Do not allow children to play with the packaging material!

Keep all packaging materials away from children.

Risk of suﬀocation!

GB │ 5 ■

SPB 10000 A1

Descriptions of components

(See fold-out page for illustrations)

Power Bank

USB plug (input: 5 V , 1 A)

ON/OFF button

Micro-USB plug (output: 5 V , 1 A)

USB port (output: 5 V , 2.1 A)

Micro-USB port (input: 5 V , 1 A)

USB port (output: 5 V , 1 A)

Charge level LEDs

Operating instructions

Operation

Check the package contents

(See fold-out page for illustrations)

The following components are included:

▯ Power Bank SPB 10000 A1

▯ These operating instructions

♦ Remove all parts of the device from the packaging and remove all packaging

materials.

NOTE

► Check the package for completeness and for signs of visible damage.

► If the delivery is incomplete or damage has occurred as a result of

defective packaging or during transport, contact the Service hotline

(see chapter entitled Service).

■ 6 │ GB SPB 10000 A1

Disposal of packaging materials

The packaging protects the device from damage during transport. The

packaging materials have been selected for their environmental friendli-

ness and ease of disposal, and are therefore recyclable.

Returning the packaging into the material cycle conserves raw materials and

reduces the amount of waste generated. Dispose of packaging materials

that are no longer needed in accordance with applicable local regulations.

Charging the Power Bank

Before using the Power Bank, the integrated battery must be fully charged.

The required charging time for the Power Bank is dependent of the charging

source and its output (max. 5V/1A).

CAUTION!

► Only use mains adapters with an output voltage of 5V and an output

current of at least 1A or a USB 3.0 port on your computer to charge

the Power Bank. You can recognise the USB 3.0 port due to the blue

marking.

► If you use another USB port, make sure that you leave at least one

additional connection free.

► Not all USB 2.0 ports deliver suﬃcient power to charge the Power Bank.

If this is the case, use an external power supply or a USB 3.0 port.

Option A

♦ Connect the USB plug of the Power Bank to a switched-on PC or a USB

power supply (not supplied). The current charge level is shown during

charging by means of the charge level LEDs :

LED display Charge level

One LED is ﬂashing < 25%

One LED is on, the second LED is ﬂashing 25–49%

Two LEDs are on, the third LED is ﬂashing 50–74%

Three LEDs are on, the fourth LED is ﬂashing 75–99%

All LEDs are on 100%

GB │ 7 ■

SPB 10000 A1

Option B

♦ Connect a Micro-USB cable (not supplied) to the Micro-USB input on

the Power Bank.

♦ Connect the other end of the Micro-USB cable to a switched-on PC or a

USB power supply (not supplied).

The current charge level is shown during charging by means of the charge

level LEDs .

CAUTION!

► Do not use both charging options simultaneously as this could dam-

age the Power Bank, your mains adapter or your computer.

Checking the charge level

You can also check the charge level of the Power Bank when it is not charged

or while it is being used for charging.

♦ Press the ON/OFF button brieﬂy. The LEDs show the current charge

level of the Power Bank for about 15 seconds.

LED display Charge level

All LEDs are on 100%

Three LEDs are on 75–99%

Two LEDs are on 50–74%

One LED is on 20–49%

One LED is ﬂashing < 20%

All LEDs oﬀ 0%

Handling and operation

Charging mobile devices with the Power Bank

You can charge up to three devices at a time using the Power Bank. When

all three outputs are being used, the total charging current may not exceed

2.1 A.

♦ Connect a suitable USB charging cable to the corresponding USB output

(or ) of the Power Bank for each device being charged.

♦ Then connect the USB charging cable to the device to be charged. The

charging process starts automatically.

♦ If charging does not start automatically, press the ON/OFF button

brieﬂy to start the charging process.

Otros manuales para SPB 10000 A1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Accesorios de Silvercrest

Silvercrest

Silvercrest SPBS 5000 B2 Manual de usuario

Silvercrest

Silvercrest SFS 52 B2 Manual de usuario

Silvercrest

Silvercrest SSKB 2200 A1 Manual de usuario

Silvercrest

Silvercrest HG06862E Manual de usuario

Silvercrest

Silvercrest SPB 6000 A1 Manual de usuario

Silvercrest

Silvercrest STWT 720 A1 Manual de usuario

Silvercrest

Silvercrest SPB 2.6 A1 Hoja de instrucciones

Silvercrest

Silvercrest NMD 3.7 B2 Manual de usuario

Silvercrest

Silvercrest SPPD 20000 A2 Manual de usuario

Silvercrest

Silvercrest SPBH 5.200 A1 Hoja de información del producto

Silvercrest

Silvercrest SAD 12 B2 Manual de usuario

Silvercrest

Silvercrest RC DS2 0201-A DE 3726 Manual de usuario

Silvercrest

Silvercrest RCR DP3 3711-A Manual de usuario

Silvercrest

Silvercrest SRL 100 A1 Manual de usuario

Silvercrest

Silvercrest SPB 5200 A1 Hoja de información del producto

Silvercrest

Silvercrest SFKS 2 B1 Manual de usuario

Silvercrest

Silvercrest 284941 Especificaciones técnicas

Silvercrest

Silvercrest SWUB 85 D3 Manual de instrucciones

Silvercrest

Silvercrest WIRELESS SOCKET SET Manual de usuario

Silvercrest

Silvercrest SPB 2.600 C1 Hoja de instrucciones

Silvercrest

Silvercrest SLS 2200 B1 Hoja de instrucciones

Silvercrest

Silvercrest RCR DP3 3711-A IP44 FR 3726 Manual de usuario

Silvercrest

Silvercrest SPB 2.600 B1 Manual de usuario

Silvercrest

Silvercrest SPB 2.6 A1 Hoja de instrucciones

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario