Silvercrest SQWP8000 1A1 Manual de usuario
QI POWER BANK
SQWP8000 1A1
IAN 305944
QI POWER BANK
Operation and Safety Notes
POLNILNA BATERIJA
POWERBANK QI
Delovanje in varnostna navodila
QI-POWERBANKA
Pokyny pro obsluhu a bezpečnostní
pokyny
QI-POWERBANK
Bedienungs- und Sicherheitshinweise
GB Operation and Safety Notes Page 5
SI Delovanje in varnostna navodila Stran 22
CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 40
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 57
QI-POWERBANK
SQWP8000 1A1
IAN 305944
QI-POWERBANK
Bedienungs- und Sicherheitshinweise
QI POWER BANK
Operation and Safety Notes
5
7
8
910
21 3
4
6
A
9
GB 5
Warnings and symbols used....................... Page 6
Introduction................................................ Page 8
Intended use................................................................Page 8
Trademark notice.........................................................Page 8
Scope of delivery........................................................Page 9
Before use....................................................................Page 9
Parts description..........................................................Page 9
Technical specifications ..............................................Page 10
Safety notices............................................. Page 11
Operation and use ..................................... Page 14
Charging the power bank ..........................................Page 14
Checking the battery status........................................Page 14
Qi wireless charging...................................................Page 15
Charging mobile devices with the power bank.........Page 16
Troubleshooting ......................................... Page 17
Cleaning and care....................................... Page 19
Storage during non-use .............................. Page 19
Disposal ..................................................... Page 19
Simplified EU declaration of conformity...... Page 20
Warranty ................................................... Page 20
GB 6
Warnings and symbols used
These instructions for use contain the following symbols and
warnings:
DANGER! This symbol with the signal word
“DANGER“ indicates a hazard with a high
level of risk which, if not avoided, will result in
serious injury or death.
WARNING! This symbol with the signal
word “WARNING“ indicates a hazard with
a medium level of risk which, if not avoided,
could result in serious injury.
CAUTION! This symbol with the signal word
“CAUTION“ indicates a hazard with a low
level of risk which, if not avoided, could result
in minor or moderate injury.
ATTENTION! This symbol with the signal
word “Attention“ indicates a possible property
damage.
NOTE: This symbol with the signal word
“NOTE“ provides additional useful information.
This action sign indicates to wear suitable
protective gloves! Follow the instructions to
avoid hands striking or being struck by objects
or being in contact with thermal or chemical
materials!
GB 7
WARNING! EXPLOSION HAZARD!
A warning with this symbol and word
“WARNING! EXPLOSION HAZARD”
indicates the potential threat of explosion.
Failure to observe this warning may result in
serious or fatal injuries and potential property
damage. Follow the instructions in this warning
to prevent serious injuries, a danger to life or
property damage!
This symbol means that the operating
instructions must be observed when using the
product.
V Voltage (direct current)
WWatt (power)
“Qi“ and the Qi logo mark are trademark of
the Wireless Power Consortium (WPC)
Smart Fast Charge (SFC): Maximum current
available is used to optimise charging time.
GB 8
QI POWER BANK
PIntroduction
We congratulate you on the purchase of your new product. You
have chosen a high quality product. The instructions for use are
part of the product. They contain important information concerning
safety, use and disposal. Before using the product, please
familiarise yourself with all of the safety information and instructions
for use. Only use the product as described and for the specified
applications. If you pass the product on to anyone else, please
ensure that you also pass on all the documentation with it.
Intended use
This QI POWER BANK (hereinafter referred to as “product”) is
an Information Technology device which is solely intended to be
used to charge mobile devices which have Qi wireless charging
technology. Devices that do not support Qi wireless technology
can be charged through a USB port. This product is not intended
for commercial use. Manufacturer is not liable for damages, which
result from non-intended use.
Trademark notice
USB®is a registered trademark of USB Implementers Forum, Inc.
“Qi“ and the Qi logo mark are trademark of the Wireless Power
Consortium (WPC)
The Smart Fast Charge trademark and trade name is the
property of their respective owners.
The SilverCrest trademark and trade name is the property of
their respective owners.
Any other names and products are trademarks or registered
trademarks of their respective owners.
GB 9
Scope of delivery
1 Qi Power bank
1 USB cable
1 Instructions for use
Before use
Note: Remove all packaging materials from the product.
Please also check the content of delivery inside the packaging
to see if there are any damages. If you notice any damage or
missing parts, please contact the dealer who sold this product.
Parts description
Please refer to the fold out page.
1Micro USB input 6Battery status indicator
2USB type A output 7Qi charging surface
3USB type C input and output 8Powerbank
4Qi status indicator 9USB cable
5On/off button 10 Instruction for use
GB 10
Technical specifications
Built-in rechargeable battery: 3.7 V , 8000 mAh,
29.6Wh (Lithium polymer)
Micro-USB input voltage / current: 5 V , 2.1 A
USB Type C input and ouput
voltage / current: 5 V , 3 A
USB Type A output
voltage / current: 5 V , 2.1 A
Qi Wireless output (1 coil)
voltage / current: 5 V , 1 A
Wireless charging power: 5 W
Wireless charging distance: ≤ 5 mm
Charging efficiency: up to 65%
Frequency band: 106.4 - 173.8 kHz
Transmitted maximum radio
frequency power (H-field):
-10 dBuA/m at 10m distance
Total maximum output power: 15 W*
Total maximal output current: 3 A*
Minimal output current: approx. 50 mA
Operating temperature: 5 – 35 °C
Storage temperature: 0 – 45 °C
Humidity (no condensation): 10 – 70 %
Dimensions: approx. 145 x 72 x 17 mm
Weight: approx. 195 g
*If all outputs are used at the same time, the sum of the output
current must not exceed 3 A.
Otros manuales para SQWP8000 1A1
1
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de Silvercrest
Silvercrest
Silvercrest RCR DP3 3711-A Manual de usuario
Silvercrest
Silvercrest SPB5.2 A1 Hoja de instrucciones
Silvercrest
Silvercrest SSE 6 B2 Manual de usuario
Silvercrest
Silvercrest SSSE 300 A1 Manual de usuario
Silvercrest
Silvercrest HG01100-BS Manual de usuario
Silvercrest
Silvercrest SPB 2.600 B1 Manual de usuario
Silvercrest
Silvercrest RCS AAA3680-A IP20 Manual de usuario
Silvercrest
Silvercrest SLUB 85 A1 Manual de usuario
Silvercrest
Silvercrest 289564 Manual de usuario
Silvercrest
Silvercrest TPB 10000 A1 Manual de usuario
Silvercrest
Silvercrest SFS 52 B2 Manual de usuario
Silvercrest
Silvercrest SPBS 5000 B2 Manual de usuario
Silvercrest
Silvercrest SPB 2.6 A1 Hoja de instrucciones
Silvercrest
Silvercrest SAD 12 A1 Manual de usuario
Silvercrest
Silvercrest SPBH 3000 B2 Manual de usuario
Silvercrest
Silvercrest SWD 100 E2 Manual de instrucciones
Silvercrest
Silvercrest 284705 Manual de usuario
Silvercrest
Silvercrest STK 36V2 A1 Manual de usuario
Silvercrest
Silvercrest SPB 5200 A1 Hoja de información del producto
Silvercrest
Silvercrest SHK 100 B2 Manual de usuario
