Siemens SIMATIC ET 200SP Manual de usuario

Product information on the

documentation of the

ET 200SP distributed I/O system

___________________

SIMATIC

ET 200SP

Product information on the documentation of the

ET 200SP distributed I/O system

Product Information

12/2014

A5E03799595

-AL

Preface

Overview of the ET 200SP

General additions to the

documentation

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03799595-AL

Ⓟ

12/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Product information on the documentation of the ET 200SP distributed I/O system

Product Information, 12/2014, A5E03799595-AL 3

Preface

Validity

This product information supplements the documentation for the ET 200SP and takes

precedence over our system manuals, function manuals and product manuals.

Security information

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

Product information on the documentation of the ET 200SP distributed I/O system

4Product Information, 12/2014, A5E03799595-AL

Table of contents

Preface ................................................................................................................................................... 3

1 Overview of the ET 200SP...................................................................................................................... 5

2 General additions to the documentation ................................................................................................ 15

Product information on the documentation of the ET 200SP distributed I/O system

Product Information, 12/2014, A5E03799595-AL 5

Overview of the ET 200SP

Contents

This product information includes amendments and corrections to the documentation of the

ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/55679227/133300).

Which I/O modules are compatible with a BaseUnit?

The following table provides an overview of the I/O modules that are compatible with the

associated BaseUnits:

Table 1- 1 Possible combinations of BaseUnits and I/O modules

I/O

module

BaseUnit BU15-

BaseUnit BU20-

Color-coded

label for pro-

cess terminals

BU type A0

P16+A10+2D

P16+A0+2D

P16+A10+2B

P16+A0+2B

BU type A1

P16+A0+12D/T

P16+A0+2D/T

P16+A0+12B/T

P16+A0+2B/T

BU type B0

P12+A4+0B

BU type B1

P12+A0+4B

BU type

P6+A2+4D

BU type

P6+A2+4B

BU type D0

P12+A0+0B

BU type

P8+A4+0B

Digital I/O modules

16x24VDC

✓--- ---

8x24VDC

✓CC01

8x24VDC

✓CC01

8x24VDC

SRC BA

✓CC02

8xNAMUR

✓CC01

Overview of the ET 200SP

Product information on the documentation of the ET 200SP distributed I/O system

6Product Information, 12/2014, A5E03799595-AL

I/O

module

BaseUnit BU15-

BaseUnit BU20-

Color-coded

label for pro-

cess terminals

BU type A0

P16+A10+2D

P16+A0+2D

P16+A10+2B

P16+A0+2B

BU type A1

P16+A0+12D/T

P16+A0+2D/T

P16+A0+12B/T

P16+A0+2B/T

BU type B0

P12+A4+0B

BU type B1

P12+A0+4B

BU type

P6+A2+4D

BU type

P6+A2+4B

BU type D0

P12+A0+0B

BU type

P8+A4+0B

4x120..23

0VAC ST

✓CC41

16x24VDC

/0.5A ST

✓--- ---

4x24VDC/

2A ST

✓CC02

8x24VDC/

0.5 ST

✓CC02

8x24VDC/

0.5A HF

✓CC02

8x24VDC/

0.5A SNK

✓CC01

4x24..230

VAC/2A

✓CC41

4x24VDC/

2A HF

✓CC02

4x24VUC/

2A CO ST

✓--- ---

4x120VDC

230VAC/5

A NO ST

✓--- ---

Overview of the ET 200SP

Product information on the documentation of the ET 200SP distributed I/O system

Product Information, 12/2014, A5E03799595-AL 7

I/O

module

BaseUnit BU15-

BaseUnit BU20-

Color-coded

label for pro-

cess terminals

BU type A0

P16+A10+2D

P16+A0+2D

P16+A10+2B

P16+A0+2B

BU type A1

P16+A0+12D/T

P16+A0+2D/T

P16+A0+12B/T

P16+A0+2B/T

BU type B0

P12+A4+0B

BU type B1

P12+A0+4B

BU type

P6+A2+4D

BU type

P6+A2+4B

BU type D0

P12+A0+0B

BU type

P8+A4+0B

Analog I/O modules

4xRTD/TC

2-/3-/4-

wire HF

✓✓--- ---

8xRTD/TC

2-wire HF

✓✓--- ---

AI 4xU/I 2-

wire ST

✓✓CC03

AI 2xU/I 2-

/4-wire HF

✓✓CC05

AI 2xU/I 2-

/4-wire HS

✓✓--- ---

AI 4xI 2-

/4-wire ST

✓✓CC03

AI 4xI 2-

wire

4...20mA

HART

✓✓CC03

AQ 4xU/I

✓✓--- ---

AQ 2xU/I

✓✓--- ---

AQ 2xU/I

✓✓--- ---

AI Energy

Meter ST

✓--- ---

Fail-safe modules

F-PM-E

24VDC/8A

PPM ST

✓CC52

F-DI

8x24VDC

✓CC01

Overview of the ET 200SP

Product information on the documentation of the ET 200SP distributed I/O system

8Product Information, 12/2014, A5E03799595-AL

I/O

module

BaseUnit BU15-

BaseUnit BU20-

Color-coded

label for pro-

cess terminals

BU type A0

P16+A10+2D

P16+A0+2D

P16+A10+2B

P16+A0+2B

BU type A1

P16+A0+12D/T

P16+A0+2D/T

P16+A0+12B/T

P16+A0+2B/T

BU type B0

P12+A4+0B

BU type B1

P12+A0+4B

BU type

P6+A2+4D

BU type

P6+A2+4B

BU type D0

P12+A0+0B

BU type

P8+A4+0B

F-DQ

4x24VDC/

2A PM HF

✓CC02

F-RQ

1x24VDC/

24..230VA

C/5A

✓CC42

Communication modules

CM 4xIO-

Link

✓CC04

CM AS-i

Master ST

✓--- ---

F-CM AS-i

Safety ST

✓✓--- ---

CM PtP

✓

---

Technology modules

TM Count

1x24V

✓--- ---

TM PosIn-

put 1

✓--- ---

SIWAREX

WP321

✓--- ---

Overview of the ET 200SP

Product information on the documentation of the ET 200SP distributed I/O system

Product Information, 12/2014, A5E03799595-AL 9

Components of the ET 200SP

Table 1- 2 CPU

Interface modules

Number in pack

Article number

CPU 1510SP-1 PN with server module

Pack of 1

6ES7510-1DJ00-0AB0

CPU 1512SP-1 PN with server module

Pack of 1

6ES7512-1DK00-0AB0

Table 1- 3 Interface modules

Interface modules

Number in pack

Article number

Interface module IM 155-6 PN ST

•with BusAdapter BA 2xRJ45 and server module Pack of 1 6ES7155-6AA00-0BN0

•with server module Pack of 1 6ES7155-6AU00-0BN0

Interface module IM 155-6 PN HF with server module Pack of 1 6ES7155-6AU00-0CN0

Interface module IM 155-6 DP HF with PROFIBUS FastConnect

bus connector (6ES7972-0BB70-0XA0) and server module

Pack of 1 6ES7155-6BA00-0CN0

Important differences between the interface modules

Features

IM 155-6 PN ST

IM 155-6 PN HF

IM 155-6 DP HF

Bus connection BusAdapter BA 2xRJ45 or

BA 2xFC

BusAdapter BA 2xRJ45,

BA 2xFC and BA 2xSCRJ

PROFIBUS DP connection

socket

Number of modules

RESET button

Yes

Not necessary

Address space (I/O data) in

bytes

256 1440 244

Multi hot-swapping

Yes

Overview of the ET 200SP

Product information on the documentation of the ET 200SP distributed I/O system

10 Product Information, 12/2014, A5E03799595-AL

Table 1- 4 BaseUnits

BU type

BaseUnits (short name)

Number in pack

Color-coded labels*

Article number

A0 BU15-P16+A10+2D Pack of 1

P16:

CC01 to CC05

A10: CC71 to CC73

6ES7193-6BP20-0DA0

A0 BU15-P16+A0+2D Pack of 1

P16:

CC01 to CC05 6ES7193-6BP00-0DA0

A0 BU15-P16+A10+2B Pack of 1

P16:

CC01 to CC05

A10: CC71 to CC73

6ES7193-6BP20-0BA0

BU15-P16+A0+2B

Pack of 1

P16: CC01 to CC05

6ES7193-6BP00-0BA0

A1 BU15-P16+A0+12D/T Pack of 1

P16:

CC01 to CC05

12D: CC74

6ES7193-6BP40-0DA1

BU15-P16+A0+2D/T

Pack of 1

P16: CC01 to CC05

6ES7193-6BP00-0DA1

A1 BU15-P16+A0+12B/T Pack of 1

P16:

CC01 to CC05

12B: CC74

6ES7193-6BP40-0BA1

BU15-P16+A0+2B/T

Pack of 1

P16: CC01 to CC05

6ES7193-6BP00-0BA1

BU20-P12+A4+0B

Pack of 1

A4: CC81 to CC83

6ES7193-6BP20-0BB0

BU20-P12+A0+4B

Pack of 1

P12: CC41

6ES7193-6BP20-0BB1

C0 BU20-P6+A2+4D Pack of 1

P6:

CC51, CC52

A2: CC84 to CC86

6ES7193-6BP20-0DC0

C1 BU20-P6+A2+4B Pack of 1

P6:

CC51

A2: CC84 to CC86

6ES7193-6BP20-0BC1

BU20-P12+A0+0B

Pack of 1

---

6ES7193-6BP00-0BD0

BU20-P8+A4+0B

Pack of 1

P8: CC42

6ES7193-6BP20-0BF0

* not shipped with the BaseUnit

Table 1- 5 Digital I/O modules

Digital I/O modules

Number in pack

Article number

DI 16x24VDC ST

Pack of 1

6ES7131-6BH00-0BA0

DI 8x24VDC ST

Pack of 1

6ES7131-6BF00-0BA0

DI 8x24VDC HF

Pack of 1

6ES7131-6BF00-0CA0

DI 8xNAMUR HF

Pack of 1

6ES7131-6FD00-0BB1

DI 8x24VDC SRC BA

Pack of 1

6ES7131-6BF60-0AA0

DI 4x120..230VAC ST

Pack of 1

6ES7131-6FD00-0BB1

DQ 16x24VDC ST

Pack of 1

6ES7132-6BH00-0BA0

DQ 8x24VDC/0.5A ST

Pack of 1

6ES7132-6BF00-0BA0

DQ 8x24VDC/0.5A HF

Pack of 1

6ES7132-6BF00-0CA0

DQ 8x24VDC/0.5A SNK BA

Pack of 1

6ES7132-6BF60-0AA0

DQ 4x24VDC/2A ST

Pack of 1

6ES7132-6BD20-0BA0

DQ 4x24..230VAC/2A ST

Pack of 1

6ES7132-6FD00-0BB1

DQ 4x24VDC/2A HF

Pack of 1

6ES7132-6BD20-0CA0

RQ 4x24VUC/2A CO ST

Pack of 1

6ES7132-6GD50-0BA0

RQ 4x120VDC-230VAC/5A NO ST

Pack of 1

6ES7132-6HD00-0BB0

Otros manuales para SIMATIC ET 200SP

101

Otros manuales de Sistema de E/S de Siemens

Siemens

Siemens SIMATIC ET 200SP Manual de lista de piezas

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens Simantic ET200SP Guía del usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens PPM-1U32.BPR Manual de usuario

Siemens

Siemens SIMATIC ET 200SP DI 8x24VDC ST Manual de usuario

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Siemens

Siemens TX-I/O Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Documento técnico

Siemens

Siemens SIMATIC ET 200eco Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200iSP Manual de usuario

Siemens

Siemens 6ES7141-6BG00-0BB0 Documento técnico

Siemens

Siemens SIMATIC ET 200SP Guía del usuario

Siemens

Siemens TALON Series Manual del producto

Siemens

Siemens Simatic ET200pro Manual de usuario

Siemens

Siemens Simatic S7-1500 Manual de usuario

Siemens

Siemens SIMATIC ET 200SP HA Manual de usuario

Siemens

Siemens SIMATIC ET 200SP HA Documento técnico

Siemens

Siemens SIMATIC ET 200S Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Siemens

Siemens SIMATIC ET 200SP Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario