Shuttle FB81 Manual de usuario

FB81

Pentium4,LGA775Processor

Based MAIN BOARD

Shuttle®FB81

Pentium 4, LGA 775 Processor Based Mainboard

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel, Pentium is a registered trademarks of Intel Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used in this manual are ascribed to their respective

owners and acknowledged.

MA25

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName: FB81

S/N:N/A

CPU:

External Frequency: 133 MHz

Intel Pentium 4, LGA 775 Processor: 2.8 GHz

External Frequency: 200 MHz

Intel Pentium 4, LGA 775 Processor: 2.8/ 3/ 3.2/ 3.4/ 3.6 GHz

Serial Port: one port with 9 pins

VGA Port: one port with 15 pins

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: four ports with 4 pins respectively

1394 Port: two ports with 6 pins respectively

LANPort:one portwith 8 pins(10Mbps/100Mbps/1000Mbps)

Center/Bass-Out Port: one port

Line-InPort:one port

Mic Port: one port (The function is based on front panel.)

Front-Out Port: one port

Surround-Back Port: one port

Rear-Out Port: one port

SPDIF-Out (Coaxial) Port: one port

SPDIF-Out (Optical) Port: one port

SPDIF-In (Optical) Port: one port

Clear CMOS button: one port

DIMM Memory (optional): DDR 400 256 MB *2

Power Cable: Detachable and Shielded (with a GND pin)

Monitor:CRT

Maximum Resolution: 1280 X 1024 V:60Hz

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Test Mode External Frequency CPU CPU Open/Close

1200MHz P4 3.6 GHz Close

2200MHz P4 3.6 GHz Open

3133MHz P4 2.8 GHz Close

4133MHz P4 2.8 GHz Open

Remedy:N/A

EMIInterference:

Crystal:14.318MHz(X2)/ 25.00MHz(X3)/24.576MHz(X4)/ 32.768KHz(X1)

ClockGenerator: U5

(D) Supported Host Peripherals:

Host Peripheral ProductName Model Name

# 1 Case FB81

# 2 Power Supply PC43I3503

# 3 SerialATAWesterm Digital WD1200JD-00FYB0

# 4 Shuttle Card Reader A011

# 5 PioneerDVD Player DVD-116

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Important Safety Information

SAFETY INSTRUCTIONS

1. Pleasereadthese safetyinstructionscarefully.

2. PleasekeepthisUser‘sManualforlaterreference.

3. PleasedisconnectthisequipmentfromAC outlet before cleaning. Don‘tuseliquid

orsprayeddetergent forcleaning.

4. Forpluggableequipment,the socket-outletshallbeinstallednear theequipment

andshallbe easilyaccessible.

5. Pleasekeepthis equipmentfromhumidity.

6. Laythisequipment onareliablesurface wheninstall.A drop or fallcouldcauseinjury.

7. Donotleave thisequipmentinan environmentunconditioned,itmay damagethe

equipment.

8. Theopeningsonthe enclosure areforairconvectionhence Protect theequipment

fromoverheating.DONOTCOVERTHEOPENINGS.

9. Makesurethevoltage ofthepowersourcewhen connecttheequipmentto the

poweroutlet.

10. Placethepowercord suchawaythat peoplecannotstep onit.Donot placeanything

overthepower cord.Thepower cordmustberatedfortheproduct andforthevoltage

andcurrentmarkedontheproduct’selectrical ratings label. The voltage andcurrent

ratingofthecord should begreaterthanthevoltage andcurrentratingmarkedon the

product.

11. Allcautionsand warningsontheequipment shouldbenoted.

12. Iftheequipmentisnotuseforlongtime,disconnectthe equipmentfrommainstoavoid

beingdamagedby transientover-voltage.

13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.

14. CAUTION:Thecomputeris provided withabattery-poweredreal-timeclock circuit.

Thereisadangerofexplosion if battery is incorrectlyreplaced.

Replaceonlywith sameorequivalenttype recommendedbythemanufacture.

Discardusedbatteriesaccordingtothe manufacturer’s instructions.

15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-

ATESAFETYSTANDARDSINCLUDING IEC60825.

CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS

CLASS 1 LASER PRODUCT

- 1 -

TABLE OF CONTENTS

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6

EXPERIENCEDDIY USER ........................................................................ 6

SYSTEMINTEGRATOR............................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION.......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FB81..............................................................................11

STEP1CPUInstallation ........................................................................ 12

STEP 2 Set Jumper............................................................................... 14

STEP3InstallDDRSDRAMSystemMemory........................................ 14

STEP 4Install InternalPeripheralsin System Case ................................ 15

STEP5MounttheMainboardontheComputerChassis........................ 16

STEP6ConnectFront-Panel Switches/LEDs/USBs/1394/Headphones

/Front-Mic................................................................................. 16

STEP 7 Connect IDE, Floppy and SerialATADisk Drives ...................... 17

STEP8Connect OtherInternalPeripherals............................................ 18

STEP9InstallAdd-on Cards inExpansion Slots .................................... 20

STEP10ConnectPowerSupply ........................................................... 20

STEP11ConnectExternalPeripheralstoBack-panel ........................... 21

STEP 12 First Time System Boot Up ..................................................... 22

- 2 -

STEP13InstallDriver&SoftwareComponents ..................................... 23

3.2 JUMPER SETTINGS ................................................................................. 24

JUMPERS&CONNECTORSGUIDE.................................................... 25

Back-Panel Connectors

VGAPort............................................................................................... 28

COM Port .............................................................................................. 28

ClearCMOSButton............................................................................... 28

1394 Port .............................................................................................. 28

PS/2 Keyboard & PS/2 Mouse Ports ..................................................... 28

Giga LAN Port....................................................................................... 29

USB Ports ............................................................................................. 29

SPDIF-OutCoaxialPort......................................................................... 29

SPDIF-OutOpticalPort ......................................................................... 29

SPDIF-InOpticalPort ............................................................................ 29

7.1ChannelRear-OutPort..................................................................... 30

7.1ChannelBass/CenterPort ............................................................... 30

7.1ChannelFront-Out Port .................................................................... 30

7.1ChannelSurround-Back Port............................................................ 30

Line-InPort ............................................................................................ 30

Front-Panel Connectors

FRONTPANELConnectors(JP6/JP3) .................................................. 31

Internal Peripherals Connectors

EnhancedIDE,Floppy Connectors ........................................................ 32

SerialATAConnectors........................................................................... 32

Other Connectors

PowerConnectors(8-pinATX2, 6-pinATX1,4-pinATX3)....................... 33

FanConnectors-FAN1/2/3/4 ................................................................ 34

- 3 -

CD-IN/MiniCD-INConnectors(CN3)(Black) /(CN4)(White) ................... 34

AUX-INConnector(CN2) (White)........................................................... 35

ExtendedUSBConnector(USB2) ......................................................... 35

ParallelPortHeader-EXT.PrintPort(JP5)............................................ 36

EXT.GPIHeader(JP1).......................................................................... 36

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 37

INSTALLMEMORY................................................................................ 37

UPGRADEMEMORY............................................................................ 37

4 SOFTWARE UTILITY ......................................................................38

4.1 Mainboard CD Overview ......................................................................... 38

4.2 Install Mainboard Software ..................................................................... 39

4.2.A Install Intel Chipset Driver ................................................................... 40

4.2.B Install Intel VGA Driver ......................................................................... 40

4.2.C Install Intel IAA Driver .......................................................................... 41

4.2.D Install Broadcom Giga LAN Driver...................................................... 41

4.2.E Install Broadcom BACS....................................................................... 42

4.2.F Install Intel USB 2.0 Driver................................................................... 42

4.2.G Install Intel High Definition Bus .......................................................... 43

4.2.H Install Intel High Definition Audio Driver ............................................ 43

4.2.I Install DirectX9 Utility........................................................................... 44

4.3 View the User's Manual........................................................................... 45

5 BIOS SETUP ................................................................................... 46

5.1 Enter the BIOS .......................................................................................... 46

5.2 THE MAIN MENU ...................................................................................... 47

STANDARD CMOS FEATURES ............................................................... 49

ADVANCED BIOS FEATURES................................................................. 52

ADVANCED CHIPSET FEATURES .......................................................... 57

INTEGRATEDPERIPHERALS .................................................................. 59

- 4 -

POWERMANAGEMENTSETUP.............................................................. 64

PNP/PCICONFIGURATIONS .................................................................... 68

PCHEALTHSTATUS................................................................................ 70

FREQUENCY/VOLTAGE CONTROL ......................................................... 72

LOAD FAIL-SAFE DEFAULTS .................................................................. 75

LOADOPTIMIZEDDEFAULTS ................................................................. 75

SET PASSWORD ..................................................................................... 75

SAVE & EXIT SETUP................................................................................ 76

EXITWITHOUTSAVING ............................................................................ 76

- 5 -

WHAT'S IN THE MANUAL

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look.......................................................Page 24

Drivers/Software Utilities >> How to Install .........................................Page 38

BIOS Setup >> How to Configure.........................................................Page 46

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

Tabla de contenidos

Otros manuales de Placa madre de Shuttle

Shuttle

Shuttle MN31 Manual de usuario

Shuttle

Shuttle Spacewalker AK31 Manual de usuario

Shuttle

Shuttle MS21 Manual de usuario

Shuttle

Shuttle AV64 Manual de usuario

Shuttle

Shuttle HOT-675V Manual de usuario

Shuttle

Shuttle MT63 Manual de usuario

Shuttle

Shuttle FN45 Manual de usuario

Shuttle

Shuttle FB77 Manual de usuario

Shuttle

Shuttle AK32A Manual de usuario

Shuttle

Shuttle AK35GT Manual de usuario

Shuttle

Shuttle MK32N Manual de usuario

Shuttle

Shuttle FB62 Manual de usuario

Shuttle

Shuttle AB49 Manual de usuario

Shuttle

Shuttle Spacewalker AB30 Manual de usuario

Shuttle

Shuttle Spacewalker AV40 Manual de usuario

Shuttle

Shuttle AB60P Manual de usuario

Shuttle

Shuttle Spacewalker AV32 Manual de usuario

Shuttle

Shuttle Spacewalker AK31 Manual de usuario

Shuttle

Shuttle Spacewalker FE22 Manual de usuario

Shuttle

Shuttle Spacewalker MS51 Manual de usuario

Shuttle

Shuttle FT20 Manual de usuario

Shuttle

Shuttle AN50R Manual de usuario

Shuttle

Shuttle MB47N Manual de usuario

Shuttle

Shuttle FN25 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario