Shuttle FB65 Manual de usuario
FB65
Pentium4/Celeron,478-pinProcessor
Based MAIN BOARD
Shuttle®FB65
Pentium 4/Celeron , 478-pin Processor Based Mainboard
Manual Version 1.0
Copyright
Copyright©2003 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
M810
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:FB65
S/N:
CPU:
External Frequency: 100 MHz
Intel P4 1.8/2.0/2.2/2.4/2.5GHz
External Frequency: 133 MHz
IntelP42.26/2.4/2.53/2.66/2.80/3.06GHz
External Frequency: 200 MHz
Intel P4 Northwood 2.4/2.6/2.80/3.0 GHz
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: four ports with 4 pins respectively
Parallel Port: one port with 9 pins
LAN Port: one port with 8 pins
1394 Port: one port with 6 pins
Line-Out & Line-In & Mic-In Ports: one port for each
DDR Memory: 256 MB *2
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:32.768KHz(X1)/14.318MHz(X2)/25 MHz(X4)/24.576(X6)
Clock Generator: U5
Test Mode External Frequency CPU Power Supply Case
Open/Closed
1133MHz Pentium4
3.06GHz ENP-2320 Closed
2133MHz Pentium4
3.06GHz ENP-2320 Open
3100MHz Pentium4
2.4GHz ENP-2320 Closed
4100MHz Pentium4
2.4GHz ENP-2320 Open
(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case KF45A N/A
#2 Power Supply (300W) ENP-0730 (ATX12V) 1000002885
#3 IBM HDD (30.7GB) 91024UB YKFY7981 3892I168
#4 MITSUMI FDD D353M
#5 SONY VCD Player CDU4811 3892A291
#6 AGP Card Winfast Geforce 2 MX 3892C520
#7 Power Cable Detachable and Shielded
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
Accessories of FB65.............................................................................11
STEP1 CPUInstallation........................................................................ 12
STEP 2 Set Jumpers............................................................................. 13
STEP3 InstallDDRSDRAM SystemMemory........................................ 13
STEP 4InstallInternal PeripheralsinSystem Case ................................ 14
STEP5 Mountthe Mainboard onthe ComputerChassis........................ 15
STEP6 ConnectFront PanelSwitches/LEDs/USB/1394a/MIC/Line-in/Line-
out ......................................................................................................... 16
STEP 7 Connect IDE, Floppy, and SerialATA Disk Drives ..................... 18
STEP8Connect OtherInternal Peripherals............................................ 19
STEP9 Connect thePower Supply........................................................ 21
STEP10 InstallAdd-onCards in ExpansionSlots .................................. 21
STEP11 ConnectExternal Peripherals toBack-Panel........................... 22
STEP 12 First Time System Boot Up ..................................................... 23
- 2 -
STEP13 InstallDrivers & SoftwareComponents ................................... 24
3.2 JUMPER SETTINGS ................................................................................. 25
JUMPERS& CONNECTORSGUIDE.................................................... 26
Jumpers
Clear CMOS Setting (JP1) ................................................................... 28
Back-Panel Connectors
COM1Port Connector ........................................................................... 29
IEEE1394a Port Connectors................................................................. 29
USB0/1Port Connectors ....................................................................... 29
10/100base-T LAN Port Connector....................................................... 29
USB2/3Port Connectors ....................................................................... 29
PS/2Keyboard & PS/2 Mouse Connectors............................................ 30
Bass/Center-OutPortConnector ........................................................... 30
Rear-OutPortConnector ...................................................................... .30
Front-OutPortConnector....................................................................... 30
Front-Panel Connectors
ATXPower On/OffSwitch Header(PWON)............................................ 31
HDD LED Header (HLED).................................................................... 31
Green LED / Power LED Header (GLED/PLED) .................................. 32
HardwareReset Header (RST) ............................................................. 32
FrontPanelConnector (JP16) ............................................................... 33
Internal Peripherals Connectors
EnhancedIDE,FloppyATAConnectors ................................................. 34
SerialATAConnectors........................................................................... 34
Other Connectors
ATXPower Supply Connector (ATX1andATX2).................................... 35
CPUand SystemFan Connector (FAN1/2/3) ......................................... 36
- 3 -
AudioCD_IN Connector(JP11) (Black) ................................................. 36
WirelessKeyboard and Mouse Headers (JP6) ..................................... 36
ParallelPort Header (JP8)..................................................................... 37
IRHeader(JP7)..................................................................................... 37
SPDIF-Out/InHeader(JP3) ................................................................... 38
ExtendUSB Header (USB4).................................................................. 38
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 39
INSTALLMEMORY................................................................................ 39
UPGRADEMEMORY............................................................................ 39
4 SOFTWARE UTILITY ......................................................................40
4.1 Mainboard CD Overview ......................................................................... 40
4.2 Install Mainboard Software ..................................................................... 41
4.2.A Install Intel Chipset Driver.................................................................... 42
4.2.B Install Realtek Audio Driver .................................................................. 42
4.2.C Install Realtek LAN Driver..................................................................... 43
4.2.D Install USB2.0 Driver............................................................................. 43
4.3 View the User's Manual........................................................................... 44
5 BIOS SETUP ................................................................................... 45
5.1 ENTER BIOS ............................................................................................. 45
5.2 THE MAIN MENU ...................................................................................... 46
STANDARD CMOS FEATURES ............................................................... 48
ADVANCED BIOS FEATURES................................................................. 51
ADVANCED CHIPSET FEATURES .......................................................... 55
INTEGRATEDPERIPHERALS .................................................................. 58
POWERMANAGEMENT SETUP.............................................................. 65
PNP/PCICONFIGURATIONS .................................................................... 69
- 4 -
PCHEALTH STATUS ................................................................................ 71
FREQUENCY/VOLTAGECONTROL ......................................................... 73
LOAD FAIL-SAFE DEFAULTS .................................................................. 75
LOADOPTIMIZEDDEFAULTS ................................................................. 75
SET PASSWORD ..................................................................................... 76
SAVE & EXIT SETUP................................................................................ 77
EXITWITHOUTSAVING ............................................................................ 77
- 5 -
WHAT'S IN THE MANUAL
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 25
Drivers/Software Utilities >> How to Install .........................................Page 40
BIOS Setup >> How to Configure.........................................................Page 45
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
- 6 -
1INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to
installation, we also suggest you to read the whole manual carefully to gain a
complete understanding of your new Shuttle FB65 mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle FB65 mainboard. You will find
that installing your new Shuttle FB65 mainboard is just easy. Bundled with an
array of onboard functions, the highly-integrated FB65 mainboard provides you
with a total solution to build the most stable and reliable system. Refer to sec-
tions 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to
find out how to get the best out of your new mainboard. Chapter 5 BIOS
Setup also contains the relevant information on how to tune up your system to
achieve higher performance.
System Integrator
You have wisely chosen Shuttle FB65 to construct your system. Shuttle FB65
incorporates all the state-of-the-art technology of the Intel
82865PE+82801EB chipset from Intel. It integrates the most advanced
functions you can find to date in a compact Small Form Factor ATX board.
Tabla de contenidos
Otros manuales de Placa madre de Shuttle
Shuttle
Shuttle HOT-649A Manual de usuario
Shuttle
Shuttle Spacewalker AK31 Manual de usuario
Shuttle
Shuttle AT30 Manual de usuario
Shuttle
Shuttle MS52P Manual de usuario
Shuttle
Shuttle AB52 Manual de usuario
Shuttle
Shuttle AV49V Manual de usuario
Shuttle
Shuttle HOT-661Z Manual de usuario
Shuttle
Shuttle FT20 Manual de usuario
Shuttle
Shuttle AB60/R Manual de usuario
Shuttle
Shuttle HOT-637 Manual de usuario
Shuttle
Shuttle FB81 Manual de usuario
Shuttle
Shuttle HOT-433 Manual de usuario
Shuttle
Shuttle HOT-679 Manual de usuario
Shuttle
Shuttle AB61 Manual de usuario
Shuttle
Shuttle AV18 Manual de usuario
Shuttle
Shuttle MV43 Manual de usuario
Shuttle
Shuttle FN25 Manual de usuario
Shuttle
Shuttle HOT-641/P Manual de usuario
Shuttle
Shuttle Spacewalker AB40 Manual de usuario
Shuttle
Shuttle SK41G Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
