Show Tec 50387 Manual de usuario

Chasy MKII

ORDERCODE 50387

Congratulations!

You have bought a great, innovative product from Showtec.

The Showtec Chasy MKII brings excitement to any venue. Whether you want simple plug-&-play action or a

sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: [email protected]

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

Showtec

Showtec Chasy MKII ™Product Guide

Warning..…...................................................................................…………………………………………..

Safety-instructions………………………………………………………………………………………….….

Operating Determinations…………………………………………………………………………………….

Description..…..............................................................................……….…………………………………

Features and Overview ………………………………...….……………….………….………………….….

Backside…………………………………………………...…...….……………….…………………...….….

Installation...............................................................................…...…………………………………….…..

Set Up and Operation.....................................................................……..……………………………….…

Maintenance...................................................................................………..………….…….………………

Replacing the Fuse........................................................................…………………….…………………

Troubleshooting............................................................................………………….………………….…..

Product Specifications.................................................................……………….…….…………………..

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow

the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

•Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

•Never remove warning or informative labels from the unit.

•Do not open the device and do not modify the device.

•Never use anything to cover the ground contact.

•Never leave any cables lying around.

•Do not insert objects into air vents.

•Do not connect this device to a dimmerpack.

•Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.

•Do not shake the device. Avoid brute force when installing or operating the device.

•Only use device indoor, avoid contact with water or other liquids.

•Only operate the device after having familiarized with its functions.

•Avoid flames and do not put close to flammable liquids or gases.

•Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power-cord by the plug. Never pull out the plug by tugging the power-cord.

•Make sure that the device is not exposed to extreme heat, moisture or dust.

•Make sure that the available voltage is not higher than stated on the rear panel.

•Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord

from time to time.

CAUTION!

Keep this device away from rain and moisture!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dan

erous electric shock when touchin

the wires!

•If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

•If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

•If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

•For adult use only. The device must be installed out of the reach of children. Never leave the unit

running unattended.

•For replacement use fuses of same type and rating only.

•This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

•Repairs, servicing and electric connection must be carried out by a qualified technician.

•WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the device

will serve you for a long time without defects.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

Cable

Pin International

BROWN FASE L

BLUE NUL N

YELLOW/GREEN EARTH

Make sure that the device is always connected properly to the earth!

Description of the device

Features

The Showtec Chasy MKII is a 4-channel chaser from Showtec.

• Chase /Audio button

• 4 channels

• Speed control

• Fuse T10A / 250V

Overview

Fig. 1

1 2 3 4 5

1) Power On/Off: Press to turn On/Off the power.

2) Output Indicators for 4 channels: Shows the current state of the relevant channel.

3) Pattern: Tap this button to select the pattern from 20 preset patterns. Each tap of this button activates the

chase from one pattern to another. The patterns consists of a pattern with all channels light at full

intensity, a continuous cycle of all patterns, several patterns with the preset scenes to chase at the set

rate, several patterns with channels 1-4 to fade in or out sequentially and two chases of flashing scenes.

4) Speed control: Move to the left for Slow speed, center for Normal speed, and right for Fast speed.

5) Chase/Audio switch button

Backside

Fig. 2

6 7 8

6) 4 x IEC socket

7) 1x Bulgin socket

8) Fuse 10A / 250V

Installation

Remove all packing materials from the chaser. Check that all foam and plastic padding is removed. Connect

all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Maintenance

The Showtec Chasy MKII requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.

Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a

damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.

Replacing a Fuse

Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse

burns out, the product will not function whatsoever. If this happens, follow the directions below to do so.

1. Unplug the unit from electric power source.

2. Insert a screwdriver into the slot in the fuse cover. Turn the screwdriver to the left, at the same time gently

push a bit (Turn and Push). The fuse will come out.

3. Remove the used fuse. If brown or unclear, it is burned out.

4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to

use a fuse of the same type and specification. See the product specification label for details.

Troubleshooting

Showtec Chasy MKII

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

1. If the device does not operate properly, unplug the device.

2. Check power from the wall, the fuse, all cables, connections, etc.

3. If all of the above appears to be O.K., plug the unit in again.

4. If nothing happens after 30 seconds, unplug the device.

5. Return the device to your Showtec dealer.

Product Specification

Model: Showtec Chasy MKII

Voltage: 240V-50Hz (CE)

Channel Output; 5A/CH, Total 10A

Fuse: 10A / 250V

Dimensions: 192x145x48mm (LxWxH)

Weight: 1,45 kg

Design and product specifications are subject to change without prior notice.

Other Showtec Products:

Run Lite 4 MKII (50338)

4 channel Chaser which can handle a load of 3A. The maximum load is 6A.

Run Lite 4 MKII is equipped with 4 IEC connectors as well as1 Bulgin connector.

Easy Chase (50319)

4 channel chaser with 16 available preset patterns.

Chase Four (50371)

Chase Four (50371B)

4 channel chase pack with many possibilities, all in 1HE 19” housing.

Dimm-Chase 4 (50373)

Dimm-Chase 4 (50371B)

19” Dimmer and Chase pack, all in 1 HE! 20 built-in chase-patterns.

Chase Lite 4 (50345)

4 channel chaser with 16 available preset patterns.

2005 Showtec.

Tabla de contenidos

Otros manuales de Equipo de DJ de Show Tec

Show Tec

Show Tec FX Blaster XL V1 Manual de usuario

Show Tec

Show Tec Vintage Blaze 33 Value Line V2 Manual de usuario

Show Tec

Show Tec Marquees Uplighter RGB LED Manual de usuario

Show Tec

Show Tec Shogun Pro-2000 Manual de usuario

Show Tec

Show Tec Polar 1920 Wash Manual de usuario

Show Tec

Show Tec Compact Par 7 Tri Manual de usuario

Show Tec

Show Tec EventMOVE 4/4 Manual de usuario

Show Tec

Show Tec 30612 Manual de usuario

Show Tec

Show Tec Jumbo Strobe MKIII DMX Manual de usuario

Show Tec

Show Tec LED Par 64 COB RGBW 200W Manual de usuario

Show Tec

Show Tec Galactic RGB-2000 Manual de usuario

Show Tec

Show Tec ColorCue 1 AIR Manual de usuario

Show Tec

Show Tec The Moustache Manual de usuario

Show Tec

Show Tec Galactic RVP-250 Manual de usuario

Show Tec

Show Tec Octopod 30 Manual de usuario

Show Tec

Show Tec Cameleon Flood 15 Q4 Manual de usuario

Show Tec

Show Tec Juno Manual de usuario

Show Tec

Show Tec FLEXSTRIP SET IP4RGB Manual de usuario

Show Tec

Show Tec Stage Blinder 4 Blaze Manual de usuario

Show Tec

Show Tec Mirrorball 30 cm V1 Manual de usuario

Show Tec

Show Tec Mirrorball Motor until 50 cm V2 Manual de usuario

Show Tec

Show Tec Mirrorball 15 cm Manual de usuario

Show Tec

Show Tec Parcan 56 Short Manual de usuario

Show Tec

Show Tec Creator 1024 pro Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario