Sennheiser SK 300 Manual de usuario

Instruction manual

SK 300

Contents

Important safety instructions .................................................2

The SK 300 G3 bodypack transmitter....................................3

The frequency bank system............................................... 3

Areas of application............................................................. 4

Delivery includes.........................................................................5

Product overview........................................................................6

Overview of the SK 300 G3 bodypack transmitter........ 6

Overview of the displays .................................................... 7

Putting the bodypack transmitter into operation..............8

Inserting the batteries/accupack...................................... 8

Charging the accupack ....................................................... 8

Connecting the microphone cable/instrument cable.... 8

Attaching and positioning the microphones ................. 9

Attaching the bodypack transmitter to clothing ...... 10

Using the bodypack transmitter.......................................... 11

Switching the bodypack transmitter on/off ............... 11

Deactivating the lock mode temporarily...................... 13

Muting the audio signal or deactivating the

RF signal.............................................................................. 14

Selecting a standard display........................................... 16

Using the operating menu..................................................... 17

The buttons ........................................................................ 17

Overview of the operating menu .................................. 18

Working with the operating menu ............................... 19

Adjusting settings via the

operating menu ....................................................................... 21

The main menu “Menu”................................................... 21

The extended menu “Advanced Menu”........................ 23

Synchronizing the bodypack transmitter with a

receiver....................................................................................... 29

Synchronizing the bodypack transmitter with the

receiver – individual operation....................................... 29

Synchronizing bodypack transmitters with

receivers – multi-channel operation ............................. 29

Cleaning the bodypack transmitter .................................... 30

Recommendations and tips .................................................. 31

If a problem occurs ... ............................................................. 32

Specifications............................................................................ 33

Connector assignment ..................................................... 34

Polar diagrams and frequency response curves of

the microphones................................................................ 35

An animated instruction manual can be

viewed on the SK 300 G3 product page on our

website at www.sennheiser.com.

Important safety instructions

• Read this instruction manual.

• Keep this instruction manual. Always include this

instruction manual when passing the product on to third

parties.

• Heed all warnings and follow all instructions in this

instruction manual.

• Use only a cloth for cleaning the product.

• Do not place the product near any heat sources such as

radiators, stoves, or other devices (including amplifiers)

that produce heat.

• Only use attachments/accessories specified by

Sennheiser.

• Refer all servicing to qualified service personnel.

Servicing is required if the product has been damaged in

any way, liquid has been spilled, objects have fallen

inside, the product has been exposed to rain or mois-

ture, does not operate properly or has been dropped.

• WARNING: To reduce the risk of short circuits, do not use

the product near water and do not expose it to rain or

moisture.

Intended use

Intended use of the ew 300 G3 series products includes:

• having read these instructions especially the chapter

“Important safety instructions”,

• using the products within the operating conditions and

limitations described in this instruction manual.

“Improper use” means using the products other than as

described in this instruction manual, or under operating

conditions which differ from those described herein.

The SK 300 G3 bodypack transmitter

The SK 300 G3 bodypack

transmitter

This bodypack transmitter is part of the evolution wireless

series generation 3 (ew G3). With this series, Sennheiser

offers high-quality state-of-the-art RF transmission

systems with a high level of operational reliability and ease

of use. Transmitters and receivers permit wireless transmis-

sion with studio-quality sound.

Features of the evolution wireless 300 G3 series:

• Optimized PLL synthesizer and microprocessor

technology

•HDX noise reduction system

• Pilot tone squelch control

• True diversity technology

• Switching bandwidth of 42 MHz

• Increased immunity to intermodulation and

interferences in multi-channel operation

The frequency bank system

The bodypack transmitter is available in 7 UHF frequency

ranges with 1,680 transmission frequencies per frequency

range:

Each frequency range (A–E, G, GB) offers 26 frequency

banks with up to 24 channels each:

Each of the channels in the frequency banks “1” to “20” has

been factory-preset to a fixed frequency (frequency

preset).

The factory-preset frequencies within one frequency bank

are intermodulation-free. These frequencies cannot be

changed.

For an overview of the frequency presets, please refer to the

supplied frequency information sheet. Updated versions

of the frequency information sheet can be downloaded

Range GB:

606 – 648

516 – 558 566 – 608 626 – 668 734 – 776 780 – 822 823 – 865

Range A:Range G:Range B: Range C:Range D:Range E:

Frequency bank 1... 20

Frequency bank U1 ... U6

Channel 24 – frequency preset

Channel 1– frequency preset

Channel 2– frequency preset

Channel 24 – freely selectable frequency

Channel 1– freely selectable frequency

Channel 2– freely selectable frequency

The SK 300 G3 bodypack transmitter

from the SK 300 G3 product page on our website at

www.sennheiser.com.

The frequency banks “U1” to “U6” allow you to freely select

and store frequencies. It might be that these frequencies

are not intermodulation-free.

Areas of application

The bodypack transmitter can be combined with the

EM 300 G3 rack-mount receiver.

The EM 300 G3 rack-mount receiver is available in the same

UHF frequency ranges and is equipped with the same

frequency bank system with factory-preset frequencies.

This has the advantage that

• a transmission system is ready for immediate use after

switch-on,

• several transmission systems can be operated simulta-

neously on the preset frequencies without causing

intermodulation interference.

Overview of the microphones and line cables:

Transmitter Combinable with Receiver

SK 300 G3 • Clip-on micro-

phones:

ME 2, ME 4

•Headmics:

ME 3

• Line cable:

CL 2

EM 300 G3

Microphone/

line cable

Microphone

type Pick-up pattern

ME 2 clip-on

microphone

pre-polarized

condenser

microphone

– omni

ME 4 clip-on

microphone

– cardioid

ME 3 headmic – cardioid

CL 2 line cable – –

531.375

SKM300

ew300 G3

B.Ch: 20.24

PEAK

MUTE

+ 12dB

-10

040

-20

-30

-40

MHz

Delivery includes

The packaging contains the following items:

1 SK 300 G3 bodypack transmitter

2 AA size batteries, 1.5 V

1 instruction manual

1 frequency information sheet

1 supplement “Framework requirements and restrictions

on frequency usage”

Product overview

Overview of the SK 300 G3 bodypack

transmitter

쐃Microphone/instrument input (MIC/LINE),

3.5 mm jack socket, lockable

쐇MUTE switch

쐋Socket for connection of RMS 1 external mute switch,

2.5 mm jack socket

쐏Antenna

쐄Operation and battery status indicator, red LED

(lit = ON/flashing = LOW BATTERY)

쐂Audio overmodulation indicator, yellow LED

(lit = AF PEAK)

쐆Charging contacts

쐊SET button

쐎UP/DOWN button 왖/왔

쐅Battery compartment

쐈Battery compartment cover

쐉Battery compartment catches

씈Infra-red interface

씉ON/OFF button

with ESC function (cancel)

씊Display panel, backlit in orange

쐃

쐏

쐄

쐂

쐊

쐆

씉

쐆

씊

쐈

쐉

쐇쐋

씈

쐅

쐎

Product overview

Overview of the displays

After switch-on, the bodypack transmitter displays the

standard display “Frequency/Name”. For further illustra-

tions and examples of the different standard displays, refer

to page 16.

The display backlighting is automatically reduced after

approx. 20 seconds.

Display Meaning

햲Audio level “AF”Modulation of the bodypack

transmitter with peak hold

function

When the transmitter’s audio

input level is excessively high, the

“AF” display shows full deflection

and, in addition, the yellow

AF PEAK LED 쐂lights up:

햳Frequency Current transmission frequency

햴Name Freely selectable name of the

transmitter

햵Transmission icon RF signal is being transmitted

햶Lock mode icon Lock mode is activated

햷“P”(pilot tone) Pilot tone transmission is

activated

햸“MUTE”Audio signal is muted/

RF signal is deactivated

햹Battery status Charge status:

approx. 100%

approx. 70%

approx. 30%

charge status is

critical

, the red

LOW BATTERY LED 쐄

is flashing:

MHz

531.375

ew300 G3

MUTE

햳 햴

햲

햶

햵

햹햸햷

쐂

쐄

Putting the bodypack transmitter into operation

Putting the bodypack

transmitter into operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use

two 1.5 V AA size batteries or the rechargeable Sennheiser

BA 2015 accupack (optional accessory).

왘Open the battery compartment by pushing the two

catches 쐉in the direction of the arrows and open the

cover 쐈.

왘Insert the two batteries or the accupack as shown

above. Please observe correct polarity when inserting

the batteries/accupack.

왘Close the battery compartment.

The battery compartment cover 쐈locks into place with

an audible click.

Charging the accupack

To charge the BA 2015 accupack (optional accessory)

installed in the bodypack transmitter:

왘Insert the bodypack transmitter into the L 2015 charger

L 2015 (optional accessory).

Connecting the microphone cable/

instrument cable

The audio input is designed for the connection of both

condenser microphones and other audio sources. DC

powering of the condenser microphones is via the MIC/LINE

socket 쐃(3.5 mm jack socket).

왘Use one of the recommended Sennheiser microphones

or the CL 2 line cable (optional accessory).

왘Connect the 3.5 mm jack plug 씋from the Sennheiser

microphone or line cable to the MIC/LINE socket 쐃

(3.5 mm jack socket).

The L 2015 charger can only charge the combination

BA 2015 accupack/bodypack transmitter. Standard

batteries (primary cells) or individual rechargeable

battery cells cannot be charged.

쐈

쐉

Putting the bodypack transmitter into operation

왘Lock the 3.5 mm jack plug by screwing down the

coupling ring 씌.

왘Via the operating menu, adjust the sensitivity of the

microphone/line input (see “Adjusting the input sensi-

tivity – “Sensitivity”” on page 21).

Attaching and positioning the microphones

ME 2

왘Use the microphone clip 씍to attach the microphone to

clothing (e.g. tie, lapel).

왘Attach the ME 2 microphone as close as possible to the

sound source.

The ME 2 clip-on microphone has an omni-directional pick-

up pattern. It is therefore not necessary to position it

precisely.

ME 3

왘Adjust the ME 3 headmic so that a comfortable and

secure fit is ensured.

The ME 3 headmic has a cardioid pick-up pattern.

왘Position the microphone so that its sound inlet is

directed towards the sound source (e.g. mouth).

쐃

씌

씋

씍

Putting the bodypack transmitter into operation

ME 4

왘Use the microphone clip 씍to attach the microphone to

clothing (e.g. tie, lapel).

The ME 4 clip-on microphone has a cardioid pick-up pattern.

왘Position the ME 4 so that its sound inlet is directed

towards the sound source (e.g. mouth).

Attaching the bodypack transmitter to

clothing

You can use the belt clip 씎to attach the bodypack trans-

mitter to clothing (e.g. belt, waistband).

The belt clip is detachable so that you can also attach the

bodypack transmitter with the antenna pointing down-

wards. To do so, withdraw the belt clip 씎from its fixing

points and attach it the other way round.

The belt clip 씎is secured so that it cannot slide out of its

fixing points accidentally.

To detach the belt clip:

왘Lift the belt clip as shown.

왘Press down the belt clip at one fixing point and pull it

out of the transmitter housing.

왘Repeat for the other side.

씍

씎

Using the bodypack transmitter

To establish a transmission link, proceed as follows:

1. Switch the bodypack transmitter on (see next section)

2. Switch the receiver on (see the instruction manual of

the receiver).

The transmission link is established and the display

backlighting of the receiver changes from red to orange.

If you cannot establish a transmission link between

bodypack transmitter and receiver, refer to the chapter

“Synchronizing the bodypack transmitter with the receiver

– individual operation” on page 29.

Switching the bodypack transmitter on/off

왘Push the two catches 쐉and open the battery compart-

ment cover 쐈.

To switch the bodypack transmitter on (online operation):

To switch the bodypack transmitter on and to deactivate

the RF signal on switch-on (offline operation):

It is vital to observe the notes on frequency selec-

tion on page 29.

왘Briefly press the ON/OFF button 씉.

The “Frequency/Name” standard display appears

on the display panel. The red ON LED 쐄lights up

and the transmission icon 햵is displayed. The

bodypack transmitter transmits an RF signal.

왘Keep the ON/OFF button pressed until “RF Mute

Off?” appears on the display panel.

왘Press the UP/DOWN button 왖/왔.

“RF Mute On?” appears on the display panel.

햵

씉

쐉

쐈

쐄

ON/OFF

Using the bodypack transmitter

To activate the RF signal:

To switch the bodypack transmitter off:

왘If necessary, deactivate the lock mode (see next

chapter).

왘Press the SET button.

The transmission frequency is displayed but the

bodypack transmitter does not transmit an RF

signal. The transmission icon 햵is not displayed

When the pilot tone function is activated on both

bodypack transmitter and receiver, and the

display has been activated via the “Warnings”

menu on the receiver, “RF Mute” (backlit in red)

appears alternately with the standard display on

the receiver’s display panel.

Use this function to save battery power or to

prepare a bodypack transmitter for use during live

operation without causing interference to existing

transmission links.

왘Briefly press the ON/OFF button.

“RF Mute On?” appears on the display panel.

왘Press the UP/DOWN button 왖/왔.

“RF Mute Off?” appears on the display panel.

왘Press the SET button.

The RF signal is activated and the transmission

icon 햵is displayed again

왘Keep the ON/OFF button 씉pressed until “OFF”

appears on the display panel. The red ON LED 쐄

goes off and the display panel turns off.

When in the operating menu, pressing the ON/

OFF button 씉will cancel your entry (ESC function)

and return you to the current standard display.

MHz

531.375

ew300 G3

MUTE

햵

ON/OFF

Using the bodypack transmitter

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via

the “Auto Lock” menu item (see page 23).

If the lock mode is activated, you have to temporarily

deactivate it in order to be able to operate the bodypack

transmitter:

The lock mode icon 햶flashes prior to the lock mode being

activated again.

왘Press the SET button.

“Locked” appears on the display panel.

왘Press the UP/DOWN button 왖/왔.

“Unlock?” appears on the display panel.

왘Press the SET button.

The lock mode is temporarily deactivated.

How you are using the bodypack transmitter

determines how long the lock mode remains

deactivated:

When you are in the operating menu

The lock mode remains deactivated until you

exit the operating menu.

When one of the standard displays is shown

The lock mode is automatically activated after

10 seconds.

MHz

531.375

ew300 G3

MUTE

햶

Using the bodypack transmitter

Muting the audio signal or deactivating the

RF signal

The MUTE switch 쐇allows you to mute the audio signal or

to deactivate the RF signal.

Via the “Mute Mode” menu item, you can set the desired

function of the MUTE switch 쐇(see page 25):

왘From the “Mute Mode” menu item, select the desired

setting (see page 25).

왘Exit the operating menu.

왘Slide the MUTE switch 쐇to the left, to the position

MUTE.

The bodypack transmitter reacts as indicated in the

table.

The current state of the muting function or the RF signal is

displayed on the display panel of the bodypack transmitter.

Setting

Slide the MUTE

switch 쐇... Function

“AF On/Off”... to the left

(position MUTE)

Mutes the audio signal

... to the right Unmutes the audio

signal

“RF On/Off”... to the left

(position MUTE)

Deactivates the RF

signal

(offline operation)

... to the right Activates the RF signal

(online operation)

“Disabled”No function

The settings “Push to mute” and “Push to talk” are

only available in conjunction with the RMS 1

external mute switch (see page 25, optional acces-

sory).

An additional display of the muting function

appears on the receiver’s display panel when

• the pilot tone function is activated on both

bodypack transmitter and receiver

and, in addition,

• this display has been activated via the

“Warnings” menu on the receiver (see the

instruction manual of the receiver).

쐇

Using the bodypack transmitter

Audio signal is muted

Transmitter’s display panel: “MUTE” 햸is displayed

Receiver’s display panel: “TX Mute” is displayed*

*only when activated on the receiver (see previous

section)

Audio signal is activated (muting is deactivated)

Transmitter’s display panel: “MUTE” 햸is not displayed

Receiver’s display panel: “TX Mute” is not displayed

RF signal is deactivated

Transmitter’s display panel: transmission icon 햵is not

displayed,

“MUTE” 햸is displayed

Receiver’s display panel: “RF Mute” is displayed*

*only when activated on the receiver (see previous

section)

RF signal is activated

Transmitter’s display panel: transmission icon 햵is

displayed,

“MUTE” 햸is not displayed

Receiver’s display panel: “RF Mute” is not displayed

You can also deactivate the RF signal on switch-on.

For more information, refer to the chapter

“Switching the bodypack transmitter on/off” on

page 13.

Using the ON/OFF button, you can also activate/

deactivate the RF signal during operation.

To do so, briefly press the ON/OFF button and

proceed as described on page 13.

MHz

531.375

ew300 G3

MUTE

햵

햸

Using the bodypack transmitter

Selecting a standard display

왘Press the UP/DOWN button 왖/왔to select a

standard display:

Contents of the display Selectable standard display

“Frequency/Name”

“Channel/Frequency”

“Name/Channel”

ew300 G3

MHz

531.375

MUTE

MHz

531.375

B.Ch: 20.24

MUTE

B.Ch: 20.24

MUTE

ew300 G3

Using the operating menu

A special feature of the Sennheiser ew G3 series is the

consistent, intuitive menu structure of transmitters and

receivers. As a result, adjustments to the settings can be

made quickly – even in stressful situations, for example on

stage or during a live show or presentation.

The buttons

Make use of the possibility to adjust settings via the

operating menu of the receiver and to transfer these

settings to the bodypack transmitter.

For more information on how to transfer settings to

the bodypack transmitter, refer to the instruction

manual of your receiver. The relevant information is

marked with the sync icon.

Button Function of the button

Press the

ON/OFF

button

• Switches the bodypack transmitter on

and off

• Cancels the entry and returns to the

current standard display (ESC function)

• Activates/deactivates the RF signal

(special function, see page 13)

Press the SET

button

• Changes from the current standard

display to the operating menu

• Calls up a menu item

• Enters a submenu

• Stores the settings and returns to the

operating menu

Press the

UP/DOWN

button 왖/왔

• Selects a standard display

• Changes to the next/previous menu

item

• Changes the setting of a menu item

ON/OFF

Using the operating menu

Overview of the operating menu

Display Function of the menu item

Main menu “Menu”

Sensitivity Adjusts the sensitivity “AF”

(see page 21)

Frequency Preset Sets the frequency bank and the

channel (see page 22)

Name Enters a freely selectable name

(see page 22)

Auto Lock Activates/deactivates the lock mode

(see page 23)

Advanced Calls up the extended menu

“Advanced Menu” (see page 23)

Exit Exits the operating menu and returns

to the current standard display

Extended menu “Advanced Menu”

Tune Sets the transmission frequencies for

the frequency banks “U1” to “U6”

(see page 23)

Sets the channel and the transmission

frequency for the frequency banks

“U1” to “U6” (see page 24)

Mute Mode Sets the mode for the MUTE switch

(see page 25)

MIC LED Sets the behavior of the STATUS LED of

the RMS 1 external mute switch

(see page 26)

RF Power Adjusts the transmission power

(see page 26)

Pilot Tone Activates/deactivates the pilot tone

transmission (see page 27)

LCD Contrast Adjusts the contrast of the display

panel (see page 27)

Reset Resets the settings made in the

operating menu (see page 27)

Main menu

“Menu”

Sensitivity

Frequency Preset

Name

Auto Lock

Advanced

Exit

Tune

Mute Mode

MIC LED

RF Power

Pilot Tone

LCD Contrast

Reset

Software Revision

Exit

Extended menu

“Advanced Menu”

Using the operating menu

Working with the operating menu

By way of example of the “Sensitivity” menu, this section

describes how to use the operating menu.

Changing from a standard display to the operating menu

Selecting a menu item

Changing and storing settings

Canceling an entry

Software Revision Displays the current software revision

(see page 28)

Exit Exits the extended menu “Advanced

Menu” and returns to the main menu

If the lock mode is activated, you have to deactivate

it in order to be able to work with the operating

menu (see page 13).

왘Press the SET button.

The current standard display is replaced by the

main menu.

The last called up menu item is displayed.

왘Press the UP/DOWN button 왖/왔to change to

the “Sensitivity” menu item.

The current setting of the selected menu item is

displayed:

왘Press the SET button to call up the menu item.

왘Press the UP/DOWN button 왖/왔to adjust the

input sensitivity.

왘Press the SET button to store the setting.

왘Press the ON/OFF button to cancel the entry.

The current standard display appears on the

display panel.

Display Function of the menu item

Sensitivity

–12 dB

Sensitivity

– 12 dB

Sensitivity

–36 dB

Sensitivity

“Stored”

Call up

“Sensitivity”

Select the desired

setting

Store the setting

SET

ON/OFF

Otros manuales para SK 300

Tabla de contenidos

Otros manuales de Transmisor de Sennheiser

Sennheiser

Sennheiser evolution wireless 300 IEM G3 Manual de usuario

Sennheiser

Sennheiser SK 500 G2 Manual de usuario

Sennheiser

Sennheiser BF1083-UHF Manual de usuario

Sennheiser

Sennheiser SK 5212-II - FREQUENCY TABLES Manual de usuario

Sennheiser

Sennheiser AC 3200-II High Gain Manual de usuario

Sennheiser

Sennheiser EK 2000 IEM Manual de usuario

Sennheiser

Sennheiser SKM 3072-U-X Manual de usuario

Sennheiser

Sennheiser SR 2020-D - Manual de usuario

Sennheiser

Sennheiser EM 300 G3 - 01-09 Manual de usuario

Sennheiser

Sennheiser SKM 1030 Dimensiones

Sennheiser

Sennheiser SER 10 Manual de usuario

Sennheiser

Sennheiser SK 3063-U Manual de usuario

Sennheiser

Sennheiser SKP 100 G3 Manual de usuario

Sennheiser

Sennheiser SKP 100 G3 Manual de usuario

Sennheiser

Sennheiser SK 500 G3 Manual de usuario

Sennheiser

Sennheiser SK 250 Manual de usuario

Sennheiser

Sennheiser SR 2050 IEM Manual de usuario

Sennheiser

Sennheiser SZI 1015-T Manual de usuario

Sennheiser

Sennheiser SK 2012-90 Manual de usuario

Sennheiser

Sennheiser SK 300 G3 Manual de usuario

Sennheiser

Sennheiser SKP 30 Guía de inicio rápido

Sennheiser

Sennheiser SK 100 G3 Manual de usuario

Sennheiser

Sennheiser SK 5212-II - 09-09 Manual de usuario

Sennheiser

Sennheiser SP230 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario