Sega OUTRUN 2 SPECIAL TOURS SDX Manual de usuario

Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan

Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584

420-6990-01

1ST PRINTING

SERVICE MANUALOUTRUN 2 SPECIAL TOURS SDX 420-6990-01

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

SERVICE MANUAL

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and sufficiently understanding the warning

displays and cautions, handle the product appropriately. Be sure to keep this manual close to the

product or in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.

Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the

product by disregarding this

pictograph will cause severe

injury or death.

Indicates that mishandling the

product by disregarding this

warning will cause a potentially

hazardous situation which can

result in death or serious injury.

Indicates that mishandling the

product by disregarding this

caution will cause a slight

hazardous situation which can

result in personal injury and/or

material damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and

equipment, this display is attached to places where the Owner's Manual, Serviceman

Manual and/or Service Manual should be referred to.

Indicates a "Protective Earth Terminal." Before operating the equipment, be sure to

connect it to the Ground.

(The step may be omitted for products in which a power cord with earth is used.)

❍Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work.

❍Be sure to turn off the power before working on the machine.

To prevent an electric shock, be sure to turn off the power before carrying out any work that

requires direct contact with the interior of the product. If the work is to be performed in the

power-on status, the Instruction Manual herein always states to that effect.

❍Be sure to ground the Earth Terminal.

(This is not required in the case where a power cord with earth is used.)

This product is equipped with the Earth Terminal. When installing the product, connect the

Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.

Unless the product is grounded appropriately, the user can be subject to an electric shock.

After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly

connected to the control equipment.

❍Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is

not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

❍Be sure to use fuses which meet the specified rating.

(Only for the machines which use fuses.)

Using fuses exceeding the specified rating can cause a fire and an electric shock.

❍Specification changes (removal of equipment, conversion and addition) not

designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc.

It is very hazardous to operate the product by removing parts and/or modifying the circuits.

Should doors, lids and protective parts be damaged or lost, refrain from operating the product,

and contact where the product was purchased from or the office herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third

party, resulting from the specifications not designated by SEGA.

❍Ensure that the product meets the requirements of appropriate Electrical

Specifications.

Before installing the product, check for Electrical Specifications. SEGA products have a

nameplate on which Electrical Specifications are described. Ensure that the product is

compatible with the power supply voltage and frequency requirements of the location. Using

any Electrical Specifications different from the designated Specifications can cause a fire and

an electric shock.

❍Install and operate the product in places where appropriate lighting is

available, allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where

the product is operated has sufficient lighting allowing the warnings to be read. If any label is

peeled off, apply it again immediately. Please place an order with where the product was

purchased from or the office herein stated.

❍When handling the monitor, be very careful.

(Applies only to the product with a monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after turning off the

power, some portions are still subject to high tension voltage sometimes. Monitor repair and

replacement should be performed only by those technical personnel who have knowledge of

electricity and technical expertise.

❍Be sure to adjust the monitor/projector properly.

(Applies only to the product with a monitor/projector.)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product

with the monitor/projector not properly adjusted may cause dizziness or a headache to an

operator, a player, or the customers.

❍When transporting or reselling this product, be sure to attach this manual to

the product.

In the case where commercially available monitors and printers are used in this product, only

the contents relating to this product are explained herein. Some commercially available

equipment has functions and reactions not stated in this manual. Read this manual together

with the specific Instruction Manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.

* The contents described herein are fully prepared with due care. However, should any

question arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status.

❐Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

❐Are Casters and Adjusters damaged?

❐Do the power supply voltage and frequency requirements meet with those of the location?

❐Are all wiring connectors correctly and securely connected? Unless connected in the correct

way, connector connections can not be made accurately. Do not insert connectors forcibly.

❐Do power cords have cuts and dents?

❐Do the fuses used meet specified ratings? Is the Circuit Protector in an energized status?

❐Are all accessories available?

❐Can all Doors and Lids be opened with the Accessory Keys? Can Doors and Lids be firmly

closed?

TABLE OF CONTENTS

E1-0703 420-6990-01

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS ....................................................................................... i

INTRODUCTION.................................................................................................ii

1PRECAUTIONS REGARDING PRODUCT OPERATION.......................... 1

1-1 BEFORE OPERATION .................................................................................................1

1-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ..............................4

1-3 PRECAUTIONS FOR TICKET OPERATION ...............................................................7

1-4 SWITCHING OFF THE POWER.................................................................................15

2GAME DESCRIPTION.............................................................................. 16

2-1 BASIC CONTROLS....................................................................................................17

2-2 GAME OUTLINE.........................................................................................................18

2-3 SETUP SCREEN ORDER AND CONTENTS.............................................................19

2-4 GAME INSTRUCTIONS .............................................................................................30

2-5 NAME ENTRY AND INTERNET RANKING ...............................................................38

3EXPLANATION OF TEST AND DATA DISPLAY ..................................... 40

3-1 SWITCH UNIT AND COIN METER ............................................................................42

3-2 SYSTEM TEST MODE ...............................................................................................43

3-3 GAME TEST MODE ...................................................................................................44

A. INPUT TEST ..........................................................................................................45

B. OUTPUT TEST ......................................................................................................46

C. DRIVE BOARD TEST............................................................................................47

D. ACTUATOR CONTROL BOARD TEST ................................................................49

E. CONTROL TOWER COMMUNICATION TEST.....................................................54

F. CALIBRATION SETTING ......................................................................................55

G. GAME ASSIGNMENTS .........................................................................................60

H. BOOKKEEPING ....................................................................................................64

I. BACKUP DATA CLEAR ........................................................................................67

4TOWER AND BILLBOARD TEST MODE................................................ 68

4-1 TOWER CONTROL BOARD......................................................................................68

4-2 TOWER AND BILLBOARD TEST MODE ..................................................................71

4-3 SETTINGS FOR WHEN 1 OR MORE UNITS HAVE BROKEN DOWN.....................73

5ERROR DISPLAY..................................................................................... 74

INTRODUCTION

This manual presents information and explanations on how to manage settings and run software for “OUTRUN 2

SPECIAL TOURS SDX.”

This manual is intended for the owners, personnel and managers in charge of operation of the product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point of purchase for this product.

For information on mechanical or hardware maintenance, see the owner’s manual.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Sega Amusements U.S.A., Inc.

800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.

TEL: 1-847-364-9787

TOLL FREE: 1-888-877-2669

FAX: 1-847-427-1065

SEGA AMUSEMENTS EUROPE, LTD.

Suite 3a, Oaks House 12-22, West Street, Epsom, Surrey, KT18 7RG, United Kingdom

Telephone: +44 (0) 1372 731820 Facsimile: +44 (0) 1372 731849

e-mail: [email protected] http://www.sega-amusements.co.uk

INTRODUCTION

Indicates important information that, if ignored, may result in the mishandling of the

product and cause faulty operation or damage to the product.

INTRODUCTION

iii

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denition of 'Site Maintenance Personnel or Other Qualied Individuals'

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualified professionals’ should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

PRECAUTIONS REGARDING PRODUCT OPERATION

1 PRECAUTIONS REGARDING PRODUCT OPERATION

1-1 BEFORE OPERATION

To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.

• Check if all of the adjusters are in contact with the surface. If they are not, the

cabinet can move and cause an accident.

• To ensure safety, carry out a trial run before starting operation, and be sure to

check the safety devices. Each ride moves, so each is equipped with safety

devices. Be sure to check that these safety devices function normally.

- Can you play a game when the motion of the ride has been stopped with the

motion selector switch on the control tower?

- When ride motion has been selected, can you stop the motion of the ride with

the motion selector switch on the control tower after the game has started?

- Does the ride stop when the MOTION STOP button at the center of the control

panel is pressed?

• Check each safety device and also check to see if any of the rides move

abnormally. Abnormal motion may cause an accident, so do not operate the

machine until the cause of the abnormality has been removed.

- Does the ride move in the direction corresponding to the direction of

operation?

- Does the ride move smoothly?

- Is there any undesirable looseness in the ride?

- Is any unusual noise emitted while the ride is operating?

- Is any unusual vibration emitted while the ride is operating?

- Does the ride stop at an even position when the game is over?

PRECAUTIONS REGARDING PRODUCT OPERATION

• If an abnormality occurs in the ride mechanism, immediately stop operation,

turn off the power, and contact the ofce indicated in this manual or the point of

purchase. If you continue to operate the machine while there is an abnormality

in it, a serious accident such as an electric shock, short circuit, re, or a fall may

occur.

• The motion of the ride will not stop when the ride is touched by anybody other

than a player. Be sure to monitor the machine during a game.

• If a part related to the actuator of the ride mechanism breaks or deforms,

for example, necessitating replacement or repair of the part, request the

ofce indicated in this manual or the point of purchase to carry out this work.

Specialized knowledge, technical expertise, and tools are necessary for

carrying out this work. If you attempt to carry out this work yourself, an accident

may occur.

• Be sure to perform appropriate adjustment of the projector. Do not leave the

machine operating with screen ickering or malfunctioning. Failure to observe

this can have a bad influence upon the players’ or the customers’ physical

condition.

• It is suggested to ensure a space for players who feel sick while playing the

game to take a rest.

• Do not put any heavy items on this product. Placing heavy items on the product

can cause accidents or parts damage.

• Do not climb on the product. Climbing on the product can cause accidents. To

check the top portion of the product, use a stepladder.

• To avoid electric shock, check that no door & cover parts are damaged or

missing.

• To avoid electric shock, short circuit and/or parts damage, do not put the

following items on or in the periphery of the product.

Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/

containers/vessels containing chemicals or water.

PRECAUTIONS REGARDING PRODUCT OPERATION

• Inspect for the following items during a trial run. If there is any type of error, use

the Test Mode, etc., to resolve the problem. If you continue use with an error, it

can cause an accident or irreparable parts damage.

Do the steering wheel and the ride move smoothly during the initialization

operation?

Is there any strangeness in the operability of the steering wheels or the pedals?

Is there any abnormality in the steering wheel reaction mechanism?

Is there any improper adjustment of the projector screen?

Are the bellows torn or has a screw dropped out of them?

• During daily cleaning, be sure to check the surface of the steering wheel, gear

shifter, and other parts that the player touches with his hands for damage,

cracks, or loose screws. If a player uses the machine while it is damaged,

cracked, or has a loose screw, the player may become injured.

• During daily cleaning, be sure to check the seat for any abnormality, wetness,

etc. Failure to do this may result in deliberate tampering or negligence being

left undetected.

• Players directly hold the controller with their bare hands so it is recommended

that wet towels (paper towels) be provided.

• Endeavor to clean the steering wheel and seat frequently.

• Provide a container or space for storing the customers’ hand luggage, etc. To

help prevent an accident and also protect parts, establish measures so that

customers do not bring raingear, such as umbrellas, on rainy days, or juice or

other beverages, into the area where the machine is installed.

• During network play, if communication is interrupted for some reason, each

game will continue independently. Also, if communication is interrupted while in

Customer Welcome Mode, the Test Screen will appear.

• When one cabinet connected for network play enters the Test Mode, the other

cabinets will move to the Test Screen. For this reason, do not needlessly put

a cabinet in the Test Mode while a customer is playing a game, even if the

cabinet is not being used.

• You can make game settings and coin/credit (fee) settings individually, even

for cabinets that are connected for network play. You can also change the

settings of an individual cabinet to those for advanced players or beginners, for

example. Normally, however, set all of the cabinets to the same settings. If you

make a mistake in the fee setting, it is likely that the balance of payments and

other items will be adversely affected.

PRECAUTIONS REGARDING PRODUCT OPERATION

In order to prevent an accident or unnecessary trouble, the attendant or operator must endeavor to always pay

attention to the behavior of the players and customer. This machine has movable rides of about the same size as an

automobile. Sometimes a player or a customer may behave in an unexpected way. Be adequately aware of safety,

and stop any behavior that is considered dangerous.

• For safety, do not allow any of the following people to play the game.

- Those who have high blood pressure or a heart problem.

- Those who have experienced muscle convulsion or loss of consciousness

when playing video games, etc.

- Those who have neck or spinal cord problems.

- Those who are intoxicated or under the inuence of drugs.

- Pregnant women or those who could be pregnant.

- Those who are not in good health.

- Those who do not follow the attendant’s instructions.

- Those who cannot grasp the Control Unit (Gun) securely because of

immobility in ngers, hands or arms.

- Persons who disregard the product’s warning displays.

The game cannot be played while sitting in a wheelchair.

• For safety’s sake, a person of less than 140 cm in height cannot play games on

this machine. Because of the dimensions of the seat and the place where the

player puts his or her feet, there is a risk that when the ride moves the player

may fail to support their weight, causing the player to fall off the ride.

• Even players who have never been adversely affected by light stimulus might

experience dizziness or headache depending on their physical condition when

playing the game. Small children are especially likely to experience these

symptoms. Caution guardians of small children to keep watch on their children

during play.

• Instruct those who feel sick during play to have a medical examination.

• To avoid injury from falls and electric shocks due to spilled drinks, instruct the

player not to place heavy items or drinks on the product.

• To avoid electric shocks and short circuits, do not allow customers to put

hands and ngers or extraneous matter in the openings of the product or small

openings in or around the doors.

• For safety’s sake, warning indicators such as stickers are placed on the

machine. However, a careless player will generally fail to read these warnings.

The attendant must point out steps and level differences on the ride in order to

prevent the occurrence of an accident.

• To avoid falls and resulting injury, immediately stop customers from leaning

against or climbing on the product, etc.

• No more than 2 persons should sit on each ride of this machine. Instruct

customers that 3 or more players must not sit on a ride. Failure to observe

this precaution may result in players striking their bodies against each other,

causing them to receive blows, fall over, or fall off the ride.

• Instruct customers not to get on or in any ride part, such as the rear of the ride

or behind the back of the seat, other than the seat. Failure to observe this

precaution may results in players falling over, falling off, or catching body parts

in the ride.

1-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)

Tabla de contenidos

Otros manuales de Máquina de juego arcade de Sega

Sega

Sega ATV Slam Manual de usuario

Sega

Sega PRIMEVAL HUNT Manual de usuario

Sega

Sega Star Wars Trilogy Manual de usuario

Sega

Sega SOUL SURFER Manual de usuario

Sega

Sega Daytona USA Manual de usuario

Sega

Sega Triple Play Manual de instrucciones

Sega

Sega THE KING OF ROUTE 66 Manual de usuario

Sega

Sega Rambo Manual de usuario

Sega

Sega Hot Racer Manual de usuario

Sega

Sega NAOMI 2 Manual de usuario

Sega

Sega Dinosaur King Manual de usuario

Sega

Sega Luigi's Mansion Arcade Guía de aplicación

Sega

Sega MIB Manual de usuario

Sega

Sega Crazy Taxi Manual de usuario

Sega

Sega Bass Fishing STD Manual de usuario

Sega

Sega Giant Plants vs Zombies The Last Stand Manual de usuario

Sega

Sega Outrun 2 Suplemento

Sega

Sega Royal Rumble Standard Version Manual de usuario

Sega

Sega TARGET BRAVO OPERATION GHOST Manual de usuario

Sega

Sega World Series Baseball Super Major League Manual de usuario

Sega

Sega Daytona USA Manual de usuario

Sega

Sega PIRATES of MONSTER ISLAND Manual de usuario

Sega

Sega Virtua Cop 3 Deluxe Type Manual de usuario

Sega

Sega House of the Dead Manual de usuario

Manuales populares de Máquina de juego arcade de otras marcas

Universal Space

Universal Space COCONUT BASH Manual de usuario

Bay-Tek

Bay-Tek EVOLVE Manual de usuario

Global VR

Global VR America's Army Instrucciones de instalación y funcionamiento

Atronic

Atronic Cashline Manual de usuario

Universal Space

Universal Space Checky Monkey Manual de usuario

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manual de usuario

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manual de usuario

Family Fun Companies

Family Fun Companies Reactor Guía de inicio rápido

Universal Space

Universal Space FRUIT MANIA Extreme Manual de usuario

falgas

falgas CARRUSEL FIESTA Manual de usuario

Konami

Konami DanceDanceRevolution Manual de usuario

Bay-Tek

Bay-Tek quik drop Manual de usuario

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manual de usuario

Adrenaline

Adrenaline Flying Tickets Instrucciones de instalación y funcionamiento

Swinks

Swinks Stern Pinball Ghostbusters Manual de usuario

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manual de usuario

jakar

jakar SPEED CARS Manual de usuario

Carmelli

Carmelli HAT TRICK NG1015H Manual de usuario