Sega Ghost Squad Manual de usuario

1ST PRINTING NOVEMBER ‘04

MANUAL NO. 4201-6831-01

Owner’s Manual

SEGA AMUSEMENTS USA, INC.

Deluxe Version

www.sauservice.com

GAME CODE: CTF

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

To maintain the safety:

To ensure the safe usage of the product, be sure to read the following before using the product. The

following instructions are intended for the users, operators and the personnel in charge of the opera-

tion of the product. After carefully reading and sufﬁciently understanding the warning displays and

cautions, handle the product appropriately. Be sure to keep this manual nearby the product or else-

where convenient for referring to it when necessary.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the

potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to under-

stand the contents of the displays before reading the text.

Indicates that mishandling the prod-

uct by disregarding this warning

will cause a potentially hazardous

situation which can result in death

or serious injury.

Indicates that mishandling the product

by disregarding this caution will cause

a slight hazardous situation which can

result in personal injury and or material

damage.

For the safe usage of the product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,

this display is attached to places where the Owner’s Manual and or Service Manual should

be referred to.

Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to

perform work as per the instructions can cause accidents. In the case where only those who have tech-

nical expertise should perform the work to avoid hazardous situation, the instructions herein state that the

serviceman should perform such work.

Be sure to turn off power before working on the machine.

To prevent electric shock, be sure to turn off power before starting the work in which the worker touches

the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual

herein always states to that effect.

Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord

with earth is used).

This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Ter-

minal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is

grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the

Control equipment, ensure that the Earth Wire is ﬁrmly connected to the Control equipment.

Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not

equipped with the Earth Leakage Breaker can cause a ﬁre when earth leakage occurs.

Be sure to use fuses which meet the speciﬁed rating. (only for the machines which use fuses).

Using fuses exceeding the speciﬁed rating can cause a ﬁre and electric shock.

WARNING! CAUTION!

Speciﬁcation changes (removal of equipment, conversion and addition) not designated by SEGA

are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is

very hazardous to operate the product by removing parts and or modifying the circuits. Should doors,

lids and protective parts be damaged or lost, refrain from operating the product, and contact where the

product was purchased from or the ofﬁce herein stated. SEGA shall not be held responsible for any

accidents, compensation for damage to a third party, resulting from the speciﬁcations not designated by

SEGA.

Ensure that the product meets the requirements of appropriate Electrical Speciﬁcations.

Before installing the product, check for Electrical Speciﬁcations. SEGA products have a nameplate on

which Electrical Speciﬁcations are described. Ensure that the product is compatible with the power

supply voltage and frequency requirements of the location. Using any Electrical Speciﬁcations different

from the designated Speciﬁcations can cause a ﬁre and electric shock.

Install and operate the product in places where appropriate lighting is available, allowing warning

labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous situ-

ation are applied to places where accidents can be caused. Ensure that where the product is operated

has sufﬁcient lighting allowing the warnings to be read. If any label is peeled off, apply it again imme-

diately. Please place an order with where the product was purchased from or the ofﬁce herein stated.

When handling the Monitor, be very careful. (Applies only to the product w/monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some

portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be

performed only be those technical personnel who have knowledge of electricity and technical expertise.

Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)

Do not operate the product leaving on-screen ﬂickering or blurring as it is. Using the product with the

monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the cus-

tomers.

When transporting or reselling this product, be sure to attach this manual to the product.

In the case where commercially available monitors and printers are used in this product, only the con-

tents relating to this product are explained herein. Some commercially available equipment has func-

tions and reactions not stated in this manual. Read this manual together with the speciﬁc Instruction

Manual of such equipment.

Descriptions herein contained may be subject to improvement changes without notice.

The contents described herein are fully prepared with due care. However, should any question arise or

errors be found, please contact SEGA.

•

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after

transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before

turning on power, check the following points to ensure that the product has been transported in a satis-

factory status.

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

Are Casters and Adjusters, damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct direction,

connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cords have cuts and dents?

Do the fuses used meet speciﬁed rating? Is the Circuit Protector in an energized status?

Are all accessories available?

Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be ﬁrmly closed?

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS

INTRODUCTION OF THE OWNER’S MANUAL

1. HANDLING PRECAUTIONS ..........................................................................................

2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ...................................

3. OPERATION .....................................................................................................................

4. NAME OF PARTS ............................................................................................................

5. ACCESSORIES .................................................................................................................

6. ASSEMBLY AND INSTALLATION ................................................................................

7. PRECAUTIONS WHEN MOVING THE MACHINE .....................................................

8. GAME DESCRIPTION .....................................................................................................

9. EXPLANATION OF TEST AND DATA DISPLAY .........................................................

10. CONTROL UNIT (GUN CONTROLLER) .......................................................................

11. 1C CARD UNIT .................................................................................................................

12. PROJECTOR ......................................................................................................................

13. COIN SELECTOR .............................................................................................................

14. REPLACING THE FLUORESCENT LIGHTS AND LAMPS .......................................

15. PERIODIC INSPECTION .................................................................................................

16. TROUBLESHOOTING .....................................................................................................

17. GAME BOARD .................................................................................................................

18. DESIGN RELATED PARTS ...............................................................................................

19. PARTS **MISSING** ........................................................................................................

20. WIRE COLOR CODE TABLE ...........................................................................................

21. WIRING DIAGRAMS ........................................................................................................

1 - 2

3 - 4

5 - 8

10 - 15

16 - 42

43 - 45

46 - 62

63 - 88

89 - 95

96 - 102

103- 112

113

114- 117

118- 119

120- 128

129- 138

139

140

XXX

SPECIFICATIONS

INTRODUCTION OF THE OWNERS MANUAL

This Owner's Manual is intended to provide detailed descriptions together with all the

necessary information covering the general operation of electronic assemblies, electrome-

chanicals, servicing control, spare parts, etc. as regards the product,

SEGA GHOST SQUAD DELUXE TYPE.

This manual is intended for the owners, personnel and managers in charge of operation

of the product. Operate the product after carefully reading and sufﬁciently understand-

ing the instructions. If the product fails to function satisfactorily, non-technical personnel

should under no circumstances touch the internal system. Please contact where the prod-

uct was purchased from.

SEGA AMUSEMENTS USA, INC. / CUSTOMER SERVICE

45133 Industrial Drive, Fremont, California 94538, U.S.A.

Phone : (415) 701-6580

Fax : (415) 701-6594

Use of this product is unlikely to cause physical injuries or damages to property. However,

where special attention is required this is indicated by a thick line, the word "IMPORTANT"

and its sign in this manual.

Indicates that mishandling the product by disregarding this display can cause the

product's intrinsic performance not to be obtained, resulting in malfunctioning.

Installation Space : 47.2 inches width X 66.1 inches

Height : 87.8 inches

Width : 47.2 inches

Length : 58.1 inches

Weight : 557.8 lbs

Power, maximum current : 590 W 6.31 A (AC 120V 60 Hz AREA)

MONITOR : 50 Type Projection Display

STOP

IMPORTANT!

◆ PRODUCTION DATE ◆

This SEGA product was produced in the year of:

2004

This signiﬁes that this work was disclosed in 2004.

DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN

Non-technical personnel who do not have technical knowledge and expertise should

refrain from performing such work that this manual requires the location's main-

tenance man or a serviceman to carry out, or work which is not explained in this

manual. Failing to comply with this instruction can cause a severe accident such

as electric shock.

Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the

location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work

should be performed by the serviceman who has technical expertise and knowledge.

The location's maintenance man and serviceman are herein deﬁned as follows:

"Location's Maintenance Man" :

Those who have experience in the maintenance of amusement equipment and vending machines, etc.,

and also participate in the servicing and control of the equipment through such routine work as equip-

ment assembly and installation, servicing and inspections, replacement of units and consumables, etc.

within the Amusement Facilities and or locations under the management of the Owner and Owner's

Operators of the product.

Activities of Location's Maintenance Man :

Assembly & installation, servicing & inspections, and replacement of units & consumables as regards

amusement equipment, vending machines, etc.

Serviceman :

Those who participate in the designing, manufacturing, inspections and maintenance service of the

equipment at an amusement equipment manufacturer.

Those who have technical expertise equivalent to that of technical high school graduates as regards

electricity, electronics and or mechanical engineering, and daily take part in the servicing & control

and repair of amusement equipment.

Serviceman's Activities :

Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of

amusement equipment and vending machines.

WARNING!











Notes:

Awww.sauservice.com

1. HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to

ensure that the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary

matters herein stated can cause personal injury or damage to the machine.

● Before performing work, be sure to turn power off. Performing the work without

turning power off can cause an electric shock or short circuit. In the case work

should be performed in the status of power on, this manual always states to that ef-

fect.

● To avoid electric shock or short circuit, do not plug in or unplug quickly.

● To avoid electric shock, do not plug in or unplug with a wet hand.

● Do not expose Power Cords and Earth Wires on the surface, (ﬂoor, passage, etc.).

If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged

cords and wires can cause electric shock or short circuit.

● To avoid causing a ﬁre or electric shock, do not put things on or damage Power

Cords.

● When or after installing the product, do not unnecessarily pull the power cord. If

damaged, the power cord can cause a ﬁre or electric shock.

● In case the power cord is damaged, ask for replacement through where the product

was purchased from or the ofﬁce herein stated. Using the cord as is damaged can

cause ﬁre, electric shock or leakage.

● Be sure to perform grounding appropriately. Inappropriate grounding can cause an

electric shock.

● Be sure to use fuses meeting speciﬁed rating. Using fuses exceeding the speciﬁed

rating can cause a ﬁre or electric shock.

● Completely make connector connections for IC BD and others. Insufﬁcient insertion

can cause an electric shock.

● Speciﬁcation changes, removal of equipment, conversion and/or addition, not desig-

nated by SEGA are not permitted.

• Failure to observe this may cause a ﬁre or an electric shock. Non-compliance with

this instruction can have a bad inﬂuence upon physical conditions of the players or

the lookers-on, or result in injury during play.

• SEGA shall not be held responsible for damage, compensation for damage to a third

party, caused by speciﬁcation changes not designated by SEGA.

● Be sure to perform periodic maintenance inspections herein stated.

WARNING!

www.sauservice.com

● For the IC board circuit inspections, only the logic tester is allowed. The use of a

multiple-purpose tester is not permitted, so be careful in this regard.

● The Projector is employed for this machine. The Projector's screen is susceptible

to damage, therefore, be very careful when cleaning the screen. For details, refer to

PROJECTOR.

● Some parts are the ones designed and manufactured not speciﬁcally for this game

machine. The manufacturers may discontinue, or change the speciﬁcations of, such

general-purpose parts. If this is the case, Sega cannot repair or replace a failed game

machine whether or not a warranty period has expired.

STOP

IMPORTANT!

3www.sauservice.com

PRECAUTIONS CONCERNING INSTALLATION LOCATION

This product is an indoor game machine. Do not install it outside. Even indoors, avoid

installing in places mentioned below so as not to cause a ﬁre, electric shock, injury and

or malfunctioning.

● Places subject to rain or water leakage, or places subject to high humidity in the

proximity of an indoor swimming pool and or shower, etc.

● Places subject to direct sunlight, or places subject to high temperatures in the prox-

imity of heating units, etc.

● Places ﬁlled with inﬂammable gas or vicinity of highly inﬂammable/volatile chemi-

cals or hazardous matter.

● Dusty places.

● Sloped surfaces.

● Places subject to any type of violent impact.

● Vicinity of anti-disaster facilities such as ﬁre exits and ﬁre extinguishers.

● The operating (ambient) temperature range is from 5˚ to 30˚.

● Be sure to check the Electrical Speciﬁcations.

Ensure that this product is compatible with the location's power supply, voltage and

frequency requirements.

A plate describing Electrical Speciﬁcations is attached to the product.

Non-compliance with the Electrical Speciﬁcations can cause a ﬁre and electric

shock.

● This product requires the Breaker and Earth Mechanisms as part of the location

facilities. Using them in a manner not independent can cause a ﬁre and electric

shock.

● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC

single phase 100~120 V area). Non-compliance with the Electrical Speciﬁcations

can cause a ﬁre and electric shock.

● Be sure to independently use the power supply equipped with the Earth Leakage

Breaker. Using a power supply without the Earth Leakage Breaker can cause an

outbreak of ﬁre when earth leakage occurs.

● Putting many loads on one electrical outlet can cause generation of heat and a ﬁre

resulting from overload.

● When using an extension cord, ensure that the cord is rated at 15 A or higher (AC

100~120 V area). Using a cord rated lower than the speciﬁed rating can cause a ﬁre

and electric shock.

LIMITATIONS OF USAGE REQUIREMENTS

WARNING!

Otros manuales para Ghost Squad

Tabla de contenidos

Otros manuales de Máquina de juego arcade de Sega

Sega

Sega BEJEWELED Manual de usuario

Sega

Sega Capcom vs SNK 2 Guía de solución de problemas

Sega

Sega Daytona USA Manual de usuario

Sega

Sega Future Tone ProjectDIVA Arcade Manual de usuario

Sega

Sega OutRun2 Manual de usuario

Sega

Sega JUNGLE TREASURES Manual de usuario

Sega

Sega Nascar Arcade Mini Standard Manual de usuario

Sega

Sega Virtua Tennis 3 Manual de usuario

Sega

Sega THE KING OF ROUTE 66 Manual de usuario

Sega

Sega NAOMI 2 Manual de usuario

Sega

Sega World Club Champion Football European Clubs... Manual de usuario

Sega

Sega KO DRIVE Manual de usuario

Sega

Sega Sonic Sports Air Hockey 2P Manual de usuario

Sega

Sega House of the Dead Manual de usuario

Sega

Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Guía de aplicación

Sega

Sega Olle King Manual de usuario

Sega

Sega House Of The Dead 3 DELUXE Manual de usuario

Sega

Sega Virtua Fighter 4 Evolution Guía de solución de problemas

Sega

Sega Mushiking Manual de usuario

Sega

Sega bop it ARCADE Manual de usuario

Sega

Sega Derby Owners Club World Edition Instrucciones de funcionamiento originales

Sega

Sega F355 Challenge Instrucciones de instalación y funcionamiento

Sega

Sega TARGET BRAVO OPERATION GHOST Manual de usuario

Sega

Sega Crazy Taxi High Roller Suplemento

Manuales populares de Máquina de juego arcade de otras marcas

Universal Space

Universal Space COCONUT BASH Manual de usuario

Bay-Tek

Bay-Tek EVOLVE Manual de usuario

Global VR

Global VR America's Army Instrucciones de instalación y funcionamiento

Atronic

Atronic Cashline Manual de usuario

Universal Space

Universal Space Checky Monkey Manual de usuario

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manual de usuario

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manual de usuario

Family Fun Companies

Family Fun Companies Reactor Guía de inicio rápido

Universal Space

Universal Space FRUIT MANIA Extreme Manual de usuario

falgas

falgas CARRUSEL FIESTA Manual de usuario

Konami

Konami DanceDanceRevolution Manual de usuario

Bay-Tek

Bay-Tek quik drop Manual de usuario

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manual de usuario

Adrenaline

Adrenaline Flying Tickets Instrucciones de instalación y funcionamiento

Swinks

Swinks Stern Pinball Ghostbusters Manual de usuario

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manual de usuario

jakar

jakar SPEED CARS Manual de usuario

Carmelli

Carmelli HAT TRICK NG1015H Manual de usuario