Sega TARGET BRAVO OPERATION GHOST Manual de usuario

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

OWNER'S MANUALOPERATION GHOST 420-0029-00UK

Sega Amusements International Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

email: [email protected] Web: http://www.segaarcade.com

Errors & Omissions Excepted (E&OE)

420-0029-00UK

1st PRINTING

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage:

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and suciently understanding the warning displays

and cautions, handle the product appropriately. Be sure to keep this manual close to the product or

in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.

Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will

cause severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause

a potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause

a slight hazardous situation which can result in personal injury and/or material

damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE". In order to protect the human body and equipment,

this display is attached to places where the instruction manual should be referred to.

Indicates a "protective earth terminal". Before operating the equipment, be sure to connect

it to the ground (this step may be omitted for products in which a power cable with earth is

used).

• Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work.

• Besuretoturno󰀨thepowerbeforeworkingonthemachine.

To prevent an electric shock, be sure to turn o the power and unplug the power cable before

carrying out any work that requires direct contact with the interior of the product. If the work is

to be performed in the power-on status, the instruction manual herein always states to that eect.

• Besuretogroundtheearthterminal(thisisnotrequiredinthecasewherea

powercablewithearthisused).

This product is equipped with the earth terminal. When installing the product, connect the earth

terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the

product is grounded appropriately, the user can be subject to an electric shock. After performing

repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control

equipment.

• Ensurethatthepowersupplyusedisequippedwithanearthleakagebreaker.

Using a power supply which is not equipped with the earth leakage breaker can cause a re when

earth leakage occurs.

• Besuretousefuseswhichmeetthespeciedrating(onlyforthemachineswhich

usefuses).

Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specicationchanges(removalofequipment,conversionsandadditions)not

designatedbySEGAarenotallowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It

is very hazardous to operate the product by removing parts and/or modifying the circuits. Should

doors, lids and protective parts be damaged or lost, refrain from operating the product, and

contact where the product was purchased from or the oce herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third party,

resulting from the specications not designated by SEGA.

• Ensurethattheproductmeetstherequirementsofappropriateelectrical

specications.

Before installing the product, check for electrical specications. SEGA products have a

nameplate on which electrical specications are described. Ensure that the product is compatible

with the power supply voltage and frequency requirements of the location. Using any electrical

specications dierent from the designated specications can cause a re and an electric shock.

• Installandoperatetheproductinplaceswhereappropriatelightingisavailable,

allowingwarninglabelstobeclearlyread.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where the

product is operated has sucient lighting allowing the warnings to be read. If any label is peeled

o, apply it again immediately. Please place an order with where the product was purchased from

or the oce herein stated.

• Whenhandlingthemonitor,beverycareful(appliesonlytoproductswith

monitors).

Some of the monitor parts are subject to high tension voltage. Even after turning o the power,

some portions are still subject to high tension voltage. Monitor repair and replacement should

be performed only by those technical personnel who have knowledge of electricity and technical

expertise.

• Besuretoadjustthemonitorproperly(appliesonlytoproductswithmonitors).

Do not operate the product leaving on-screen ickering or blurring as it is. Using the product

with the monitor not properly adjusted may cause dizziness or a headache to an operator, a

player, or customer.

• Whentransportingorresellingthisproduct,besuretoattachthismanualtothe

product.

* In the case where commercially available monitors and printers are used in this product, only the

contents relating to this product are explained herein. Some commercially available equipment

has functions and reactions not stated in this manual. Read this manual together with the specic

instruction manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.

* The contents described herein are fully prepared with due care. However, should any question

arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status:

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

Are casters and adjusters damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct way,

connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and dents?

Are all accessories available?

Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general

operation of electronic assemblies, electromechanical, servicing control, spare parts, etc. for the product:

"TARGET BRAVO: OPERATION GHOST"

This manual is intended for the owners, personnel managers in charge of operation of this product.

Operate the product after carefully reading and suciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn o the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the oce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the words "STOP, IMPORTANT or CAUTION” and the symbols below.

Indicates important information that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

Indicates a warning or caution that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

SegaAmusementsEuropeLimited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

European Sales: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

USA Sales: +00 (1) 224 265 4287

STS (Spares): +44 (0) 208 391 8060 Facsimile: +44 (0) 208 391 8096

email: [email protected] Web: http://www.segaarcade.com

SPECIFICATIONS

42inch Cabinet

Machine Dimensions: 1.44m (56.6in.) [Width] x 1.11m (43.7in.) [Depth]

Machine Height: 2.45m (96.4in.) (Installed)

Machine Weight: 250kg Approx (Installed)

Power, maximum current: -225w-

Rating: 1.2A @ 240vac

2.4A @ 120vac

INTRODUCTION

SPECIFICATIONS

55inch Cabinet

Machine Dimensions: 1.78m (70.1in.) [Width] x 1.13m (44.4in.) [Depth]

Machine Height: 2.71m (106.6in.) (Installed)

Machine Weight: 250kg Approx (Installed)

Power, maximum current: -225w-

Rating: 1.2A @ 240vac

2.4A @ 120vac

Licensing

DYNA Font

The typefaces included herein are solely developed by DynaComware.

INTRODUCTION

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-

vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by

carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable

parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-

nance of amusement equipment. The individual should have either graduated from technical school or hold similar

qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denitionof'SiteMaintenencePersonnelorOtherQualiedIndividuals’

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualied professionals’ should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

INTRODUCTION

WasteofElectricalandElectronicEquipment(WEEE)Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based

manufacturers and importers of Electrical and Electronic Equipment (EEE) to ensure waste equipment is disposed of

in accordance with the directive at the end of their useful life.

The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this

product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements

International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a

designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical

and electronic equipment.

For more information on Approved Authorised Treatment Facilities (AATF) within the UK please consult the

government website www.gov.uk

For users outside of the UK EEE should be disposed of in accordance with the local policy on the recycling of Waste

Electrical and Electronic Equipment.

BatteryRecyclingStatement.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on

the environment and encourage the recovery of the materials they contain. To achieve increased collection and

recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and

importers of portable, industrial and automotive batteries.

The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates

they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used

batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority

oce.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

vii

TABLE OF CONTENTS

INTRODUCTION iii

1HANDLING PRECAUTIONS 1

2 PRECAUTIONS REGARDING INSTALLATION 4

3 PRECAUTIONS REGARDING OPERATION 8

3-1 BEFORE OPERATION 8

3-2 PAYING ATTENTION TO CUSTOMERS 10

4PART DESCRIPTIONS 12

5ACCESSORIES 13

6 ASSEMBLY AND INSTALLATION 14

6-1 INSTALLING THE CABINET 15

6-2 FIXATION TO SITE 19

6-3 POWER SUPPLY AND OTHER CONNECTIONS 21

6-4 TURNING ON THE POWER 22

6-5 CONFIRMATION OF ASSEMBLY 24

6-6 APPLYING WARNING LABELS (EPILEPTIFORM SEIZURES) 25

7PRECAUTIONS WHEN MOVING THE MACHINE 26

7-1 PRECAUTIONS WHEN MOVING FROM SITE 27

8GAME DESCRIPTION 28

8-1 HOW TO PLAY 28

8-2 GAME SCREENS 28

8-3 RELOADING 29

8-4 SWITCHING SHOOTING MODE 29

8-5 RTO (REAL TIME TACTICAL ORDER) 30

8-6 ITEMS 30

8-7 EVENTS 31

8-8 BATTLES WITH BOSSES 31

8-9 GAME OVER 32

8-10CONTINUE PLAY BONUS 33

viii

9EXPLANATION OF TEST AND DATA DISPLAY 34

9-1 SWITCH UNIT AND COIN METER. 35

9-2 SYSTEM TEST MODE 36

9-3 GAME TEST MODE 37

9-4 SYSTEM INFORMATION 48

9-5 STORAGE INFORMATION 50

9-6 JVS TEST 51

9-7 MONITOR TEST 54

9-8 SPEAKER TEST 55

9-9 COIN ASSIGNMENTS 56

9-10CLOCK SETTINGS 60

9-11NETWORK TEST 62

9-12EXIT 64

10 CONTROLLERUNIT(S) 65

10-1 REMOVING THE CONTROLLER UITS 67

10-2 REMOVING THE CONTROLLER SUPPORT 69

10-3 REMOVING THE SCOPE 70

10-4 REMOVING THE MICROSWITCH 72

10-5 REPLACING THE SOLENOID 74

11 GRAPHICS DISPLAY 76

11-1 PRECAUTIONS WHEN HANDLING THE LCD DISPLAY 76

11-2 CLEANING THE SCREEN SURFACE 77

11-3 SCREEN ADJUSTMENT 78

12 COIN HANDLING 82

12-1 CLEANING THE COIN SELECTOR 82

12-2 FAULT FINDING 85

12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 86

12-4 ADJUSTING THE PRICE OF PLAY (VTS) 87

13 LAMPS AND LIGHTING 88

13-1 COIN DOOR LAMP 88

13-2 START BUTTON LAMP REPLACEMENT 89

13-3 SCREEN LED STRIP REPLACEMENT 90

14 PERIODIC INSPECTION 92

15 TROUBLESHOOTING 94

15-1

TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) 94

16 GAME BOARD 96

16-1HANDLING PRECAUTIONS 97

16-2PARTS DETAILS 98

16-3RINGWIDE COMPONENTS 102

16-4ERROR CODES DISPLAY 103

16-5REPLACING THE BUTTON BATTERY 114

16-6CLEANING RINGWIDE 116

16-7GAME BOARD (RINGWIDE) LOCATION AND REMOVAL 118

17 FUSES AND FUSE REPLACEMENT 121

17-1 CONTROLLER AND LED FUSE REPLACEMENT 121

17-2 MAIN FUSE REPLACEMENT 123

17-3 AC DISTRIBUTION FUSE BD 124

18 DESIGN-RELATED PARTS 125

19 PARTS LIST 127

20 WIRE COLOUR CODE TABLE 137

Tabla de contenidos

Otros manuales de Máquina de juego arcade de Sega

Sega

Sega SOUL SURFER Manual de usuario

Sega

Sega The House Of The Dead 4 29"STD Manual de usuario

Sega

Sega Bass Fishing STD Manual de usuario

Sega

Sega House of the Dead Manual de usuario

Sega

Sega OutRun2SP Manual de usuario

Sega

Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Guía de aplicación

Sega

Sega VIRTUA COP Manual de usuario

Sega

Sega F355 Challenge Instrucciones de instalación y funcionamiento

Sega

Sega Club Kart Prize Manual de usuario

Sega

Sega Virtua Tennis 3 Manual de usuario

Sega

Sega CAPTO CRANE Manual de usuario

Sega

Sega MIB Manual de usuario

Sega

Sega Ford Racing Full Blown Deluxe Manual de usuario

Sega

Sega Dinosaur King Manual de usuario

Sega

Sega Future Tone ProjectDIVA Arcade Manual de usuario

Sega

Sega NAOMI Manual de usuario

Sega

Sega PIRATES of MONSTER ISLAND Manual de usuario

Sega

Sega House Of The Dead Scarlet Dawn Manual de usuario

Sega

Sega BEJEWELED Manual de usuario

Sega

Sega HOUSE OF THE DEAD 4 SUPER DELUXE Manual de usuario

Sega

Sega Olle King Manual de usuario

Sega

Sega Cows Might Fly Manual de usuario

Sega

Sega Daytona USA Manual de usuario

Sega

Sega Triple Play Manual de instrucciones

Manuales populares de Máquina de juego arcade de otras marcas

Universal Space

Universal Space COCONUT BASH Manual de usuario

Bay-Tek

Bay-Tek EVOLVE Manual de usuario

Global VR

Global VR America's Army Instrucciones de instalación y funcionamiento

Atronic

Atronic Cashline Manual de usuario

Universal Space

Universal Space Checky Monkey Manual de usuario

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manual de usuario

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manual de usuario

Family Fun Companies

Family Fun Companies Reactor Guía de inicio rápido

Universal Space

Universal Space FRUIT MANIA Extreme Manual de usuario

falgas

falgas CARRUSEL FIESTA Manual de usuario

Konami

Konami DanceDanceRevolution Manual de usuario

Bay-Tek

Bay-Tek quik drop Manual de usuario

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manual de usuario

Adrenaline

Adrenaline Flying Tickets Instrucciones de instalación y funcionamiento

Swinks

Swinks Stern Pinball Ghostbusters Manual de usuario

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manual de usuario

jakar

jakar SPEED CARS Manual de usuario

Carmelli

Carmelli HAT TRICK NG1015H Manual de usuario