Securam SafeLogic Basic Manual de usuario

SafeLogic Basic

Operating Instructions (Manager)

Open the safe lock.

Change Manager Code.

Add or delete the User Code.

Enable or disable the User Code.

In some instances, the Manager Code and associated Operating Instructions

are not issued to the End User. In this case, simply remove this insert from the

Operating Instruction.

Manufacturer default codes

The Manager Code is set to 1-1-1-1-1-1

The User Code is set to 1-2-3-4-5-6

MANAGER PROGRAMMING

Always perform operations with the safe lock system unlock and the safe door open. Before

closing the door, make sure all of the program changes are correct. 

The system will not allow the User Code to be set to six zeros.

To Change the Manager Code

Enter “0” six times. Two beeps will sound on the final “0” indicating the entry is valid and the

system is awaiting the code change.

Enter the existing six (6) digit code. Two beeps will sound on the final digit indicating the entry

is valid.

Enter the new six (6) digit code. One final beep will sound, indicating the entry is valid.

Re-enter the new six (6) digit code. One final beep will sound indicating the code changing

process is successful.

Notes:

If Three Beeps sound, the code change process has been unsuccessful and the existing code

is still valid. Repeat code change steps above.

Verify the new code at least 3 times to ensure the code has been programmed correctly.

The system will revert to standby status if there is no key press within 10 seconds. Standby

status is indicated by two short beeps.

To Add the User Code

The lock will be set on a default code of 1 2 3 4 5 6

If the user code has been deleted, follow these steps to add the User Code:

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “1”. One beep will sound, indicating that the system is ready to receive the new

User Code 

Enter a six digit code. Two beeps will sound. 

Repeat the six digit code. One beep will sound, indicating that the six digit codes entered were

the same and the addition of the User Code was successful. 

If 3 beeps sound, the programming attempt was unsuccessful. Repeat the steps above. 

Notes:

If Three Beeps sound, the code change process has been unsuccessful and the existing code

is still valid. Repeat code change steps above.

Verify the new code at least 3 times to ensure the code has been programmed correctly.

The system will revert to standby status if there is no key press within 10 seconds. Standby

status is indicated by two short beeps.

To Disable the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “2”. One beep will sound, indicating that the system has disabled the User Code.

To Enable the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “1”. One beep will sound, indicating that the system has enabled the User Code 

To Delete the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “3”. One beep will sound, indicating that the system has deleted the existing User

Code

Now follow the “To Add the User Code “instruction if you wish to program a user

Default User Code

1 2 3 4 5 6

Default Manager Code

1 1 1 1 1 1

Your User Code

Your Manager code

Tabla de contenidos

Otros manuales de Cerrar de Securam

Securam

Securam ScanLogic Optical Manual de instalación

Securam

Securam SafeLogic Basic Manual de usuario

Securam

Securam ProLogic L02-C Manual de usuario

Securam

Securam SH-WB01 Manual de usuario

Securam

Securam ProLogic B22 Manual de usuario

Securam

Securam SafeLogic C10 D-Drive Manual de usuario

Securam

Securam SafeLogic Basic Manual de usuario

Securam

Securam ProLogic L22 Manual de usuario

Securam

Securam SafeLogic Xtreme Manual del propietario

Securam

Securam ScanLogic D66 Manual de usuario

Securam

Securam EM-1701A-R Manual de usuario

Securam

Securam ProLogic L66 Manual de usuario

Securam

Securam V8 Manual técnico

Securam

Securam SafeLogic TopLit Series Manual de usuario

Securam

Securam SCANLOGIC FPC-1808-II-MB Manual de usuario

Securam

Securam FPC-0601A-D22 Manual de usuario

Securam

Securam SafeLogic Xtreme Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Securam

Securam ProLogic B01 Manual de usuario

Securam

Securam D Series Manual de usuario

Securam

Securam SafeLogic Basic Series Manual de usuario

Securam

Securam SH-TB01 Manual de usuario

Securam

Securam ProLogic L22 Manual de usuario

Securam

Securam MANAGER Series Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario

Metra Electronics

Metra Electronics Door Access Terminal Combo Manual de usuario