Sauter LB Manual de usuario

Sauter GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel.: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.sauter.eu

Instruction Manual

Digital Length Measuring Device

SAUTER LB

Ver. 1.2

01/2018

GB

LB-BA-e-1812

PROFESSIONAL MEASURING

2 LB-BA-e-1812

GB

SAUTER LB

V. 1.2 01/2018 Instruction Manual

Digital Length Measuring Device

Summarize:

1Dimensions .................................................................................................... 3

2Funktionen ..................................................................................................... 3

3Maintenance................................................................................................... 4

4Fixing Instructions......................................................................................... 4

LB-BA-e-1812 3

1 Dimensions

Small window behind the battery = Data output for printer

Battery: UCAR Mod. CR2032 3Volt- already inserted

2 Funktionen

1. Right Button R: press to switch on

4 LB-BA-e-1812

2. Right Button R: press and release rapidly for zeroing the Length measuring device

3. Right Button R: press and hold for a longer time to switch off

4. Left button L: press and release rapidly change of units from mm to inch values

and vice versa

5. Left button L: press and hold, then REF 1 is ready to HOLD. Measurement is

locked by pressing and rapidly releasing the R button. To return to normal values,

HOLD has to be taken off by pressing R and exit from REF 1 by pressing L.

6. Left button L: With REF the device is ready for the PRESET. By pressing and

holding button L, PRESET appears. Then L has to be pressed and rapidly released

to select the desired box, go to button R to set the value and L has to be pressed to

exit from the selection.

7. Left button L: With REF 1, button L has to be pressed once to go to REF 2 or vice

versa for setting any two values.

3 Maintenance

a) The working surface should be kept clean and dry.

Prevent liquids from getting from outside into the frame, lest because the electronics

might be damaged. In case that liquid have entered, the frame has to be screwed,

taken apart and dried at a temperature below 60°C.

b) The body of the device has to be cleaned with a soft fabric and optionally with a

liquid soap. Do not use petroleum based lacquer thinner, industrial alcohol or

petroleum spirits. Organic solutions are also not allowed for cleaning.

c) Never apply any power pressure against any part of the scale lest it might damage

the housing.

4 Fixing Instructions

Check before to see whether the length measuring device has been damaged in any

way. If so, please contact the technical service department of our SAUTER GmbH

immediately, to look for further proceedings.

Annotation:

To have a look at the CE Declaration of Conformity, please click onto the following

link: https://www.kern-sohn.com/shop/de/DOWNLOADS/

Tabla de contenidos

Otros manuales de Instrumento de medición de sauter

sauter

sauter FK 50 Manual de usuario

sauter

sauter LA Manual de usuario

sauter

sauter FL series Manual de usuario

sauter

sauter SW 1000 Manual de usuario

sauter

sauter modu840 Manual de usuario

sauter

sauter FK 10 Manual de usuario

sauter

sauter FH Series Manual de usuario

sauter

sauter SU Manual de usuario

sauter

sauter TVP-L Manual de usuario

sauter

sauter TN-US Manual de usuario

sauter

sauter TO-EE Manual de usuario

sauter

sauter HBA 100-0 Manual de usuario

sauter

sauter FP Series Manual de usuario

sauter

sauter FH-M Manual de usuario

sauter

sauter CD P2 Manual de instrucciones

sauter

sauter SW 1000 Manual de usuario

sauter

sauter FS Series Manual de usuario

sauter

sauter TF 1250-1.1FN Manual de usuario

sauter

sauter MFS-3202 Manual de usuario

sauter

sauter TPE-N Manual de usuario

sauter

sauter FT 1K Manual de usuario

sauter

sauter CE WT1-Y1 Manual de usuario

sauter

sauter SP 200K Manual de usuario

sauter

sauter TE 1250-0.1F Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario