Ruijie RG-S6520 Series Manual de instalación y funcionamiento

Ruijie RG-S6520 Series Switches

Hardware Installation and Reference Guide

DocumentVersion:V1.0

Date: 2022.06.09

All rights are reservedin this documentandthis statement.

Any reproduction,excerption,backup,modification, transmission,translationorcommercial use ofthis document

orany portion ofthis document,inanyform orby anymeans,withoutthe priorwritten consentofRuijie Networks

is prohibited.

Trademark and are ownedby Ruijie Networks.

All othertrademarks orregisteredtrademarksmentioned inthisdocumentareownedbytheirrespectiveowners.

Disclaimer

The products,services,orfeatures you purchasearesubjecttocommercialcontracts andterms. Someorall of

the products,services or features describedinthis documentmaynot be withinthe scopeof your purchaseor

use.Unless otherwiseagreedin thecontract,RuijieNetworks does notmake anyexpress or impliedstatement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time.RuijieNetworks reserves therightto modifythe content of the documentwithoutanynotice or prompt.

This manual is for referenceonly. RuijieNetworks endeavors to ensure content accuracyand will not shoulder

any responsibilityfor lossesand damagescausedduetocontent omissions,inaccuracies orerrors.

Preface

IntendedAudience

This documentis intendedfor:

Networkengineers

Technical supportand servicing engineers

Networkadministrators

Technical Support

Ruijie Networks Website:https://www.ruijienetworks.com/

TechnicalSupportWebsite:https://ruijienetworks.com/support

CasePortal:https://caseportal.ruijienetworks.com

Community:https://community.ruijienetworks.com

TechnicalSupportEmail:service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands,commandoptions,andkeywords are in bold font.

Italicfont

Arguments for whichyou supplyvalues arein italicfont.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are groupedinbraces andseparated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are groupedinbrackets and

separatedbyvertical bars.

&<1-n>

The argumentbeforethesign (&) can be inputfor consecutive1- n

times.

Double slashes atthe beginningofa lineof code indicate a

commentline.

2. Signs

The signs usedin this documentaredescribedas follows:

Warning

An alert that calls attention to importantrules and information thatif not understood orfollowed can resultin

data loss orequipmentdamage.

Caution

An alert that calls attention to essential information thatifnot understood orfollowed can resultin function

failure or performancedegradation.

Note

An alert that contains additional orsupplementaryinformation thatifnot understood orfollowed will notlead to

serious consequences.

Specification

An alert that contains a description ofproductor version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicativepurpose only.Incaseofany discrepancyorinconsistencybetweenthe manualandthe actual version,

the actual version prevails.

Hardware Installation and Reference Guide Product Overview

- 4 -

1 Product Overview

RG-S6520 switches are data center oriented high density40G/100G access switches, providing 40G/100G access, low

latency, and completedata center features.RG-S6520-64CQswitches,with up to 64 100G ports, can be usedwith RG-

N18000-X/RG-S6500-4Cswitchestocomposea high-performance andhigh-reliabilitydata center network.

The RG-S6520Series Switches:

Model

100G QSFP28

Ethernet Port

25G/10G

SFP28

Ethernet Port

10GBase-T

Ethernet Port

Extension

Module Slot

Redundant

Fan

Redundant

Power Supply

RG-

S6520-

64CQ

N/A

2+1

1+1

An SFP28 port supports 25G/10Gbase-R anddoes notsupport1000base-X.

A QSFP28 port supports both100G/40Gmodeand 4x25G/4x10G mode.

Specifications

Model

RG-S6520-64CQ

CPU

Quad-coreprocesser,1.5GHz

BOOT ROM

8MB

FLASH Memory

8GB

SDRAM

DDR44GB (Compatibility:8GB)

Extension Module

Slot

Unsupported

Extension Module

Unsupported

Fan Slot

3 (support2+1 redundancy, configure at least2 fan modules in one switch)

Fan Module

M6520-FAN-F

Power Supply

Slot

2 (support1+1 redundancy)

Power Module

RG-PA800I-F

Power Supply

Input

AC input

Rated voltage range: 100V AC to 240VAC

Maximum voltage range: 90V AC to 264VAC

Frequency: 50 Hz to 60 Hz

Rated current: 5A to 10A

High voltage direct current(HVDC) input:

Input voltage range:192V DC to 288VDC

Input current range:4.5A

Power

Consumption

Less than600 W

Optical Module

Refer toAppendix B

The supportedmodulesupdateatany time,contact Ruijie Networks fordetails.

Hardware Installation and Reference Guide Product Overview

- 5 -

SFP28 Port

Unsupported

QSFP28 Port

Supported

FC Port

Unsupported

10GBASE-T Port

Unsupported

Temperature

Warning

Supporttemperaturewarningandover-temperatureprotection.

EMC Standards

GB9254-1998FCC CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°Cto 45°C (32°F to 113°F)

Storage

Temperature

-40°Cto 70°C(-40°Fto 158°F)

Working Humidity

10% to 90% RH (non-condensing)

Weight

Net weight:20 kg (including3 fan modules and2 powermodules)

Dimensions

(L x W x H)

442mmx 450mmx 88.1 mm,2RU

RG-S6520-64CQswitchis a class A product. In a domesticenvironment,this productmaycauseradio interference

in which casetheusermaybe requiredto take adequatemeasures.

The 100GEthernet port of the RG-S6520-64CQswitchsupports DAC.For a detailedmodeland specification,refer

to Appendix B.

Product Appearance

The hardwareof the S6520-64CQincludes thechassis,thepowersupplysystem and theheat dissipationsystem.

The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy. It is

recommended users configure powersupplyredundancy.

The heatdissipation system:Provides three fan module slots,which support2+1fan redundancy.It is recommended

users configure allfans redundancy.

Figure 1-1 Appearance of the S6520-64CQ

Front Panel

Figure 1-2 Front Panel of the S6520-64CQ

Hardware Installation and Reference Guide Product Overview

- 6 -

2 4

3 5

Notes:

1. Switch status indicator

2. Switch locatorindicator

3. Consoleport

4. MGMT port

5. USB 2.0 port

6. QSFP28 port

7. QSFP28 port status indicator

The S6520-64CQsupports 100GQSFP28 module and 40GQSFP+ module.

Back Panel

Figure 1-3 Back Panel of the S6520-64CQ

Notes:

1. Powersupplymodule slot

2. Fan moduleslot

3. Assetlabel

4. Fan status indicator

5. Grounding point

Asset Management Label

The assetmanagementlabel is next to the switchstatus indicatorof the switchbackpanel.The labelis movable and can

be withdrawn from the device. Users can markthe information such as assetname,category, code and registration date

on the labelwhich helps to improveassetmanagementaccuracyand efficiency.

Figure 1-4 AssetManagementLabel of the RG-S6520-64CQ

Hardware Installation and Reference Guide Product Overview

- 7 -

External Ports

The RG-S6520-64CQprovides the followingports:

Universal serial bus (USB)port:This port can connect withUSB memoryto save logs,hostversions,warnings and

other diagnosticmessages.Therefore,it is moreconvenientto upgradethesoftware versionof the switchonline

and save the log information.

To protect the data and avoid device damage,usequalifiedUSBflashdisks of good brands.At the sametime,the

local USB port is compatiblewithmostofthe USB controllers exceptsomeUSBflash disks.

RG-S6520-64CQseries switches support debugging, configuration, maintenance, management and host software

uploadingofConsoleports.

Console port:Use RS-232interfaceelectricallevel and standardRJ45 connector.This interfaceis connectedwith

the serial portof terminalPC to perform system debugging,configuration,maintenance,management,andhost

software uploading.

MGMT port: This is an out-bandEthernet port, which uses standardRJ45 connector.This interface is connected

with Ethernetport of a PC to perform program downloading.

QSFP28 port: There are 64 100G QSFP28 ports,which supportoptical modulesand DACcopper cables. Some

ports (port 1-5, 17-21,33-37and 49-53)can workin 4x25G mode.

Indicator

Panel

Identification

Status

Meaning

Switch status indicator

Status

Off

The system is notpoweredup.

Hardware Installation and Reference Guide Product Overview

- 8 -

(Front panel/Back

panel)

Solid red

1) One of the modules ofthe system fails.

2) There are less than2 fans.

3) The internal or partialtemperature exceeds the

warning working temperature,andtheswitching

service resets.

Blinking green.

The system is initializing.

Solid green

The system is operational.

Solid yellow

1) The temperature gets tothe warningthreshold.

2) Only 2 fans are in the position.

3) One of the dual powers is not connected withthe

AC powercord.

Switch locatorindicator

(Front panel/Back

panel)

Off

Device location is disabled.

Solid blue

Device location is enabled.

MGMT port indicator

MGMT

Off

The port is not connected.

Green

The port is connectedat 10M/100M/1000Mbps.

Blinking

The port is transmitting orreceiving data.

QSFP28 port status

indicator

1F-64F

Off

The port is not connected.

Solid green

The port is connected at 40G/100Gbps.

Blinking green

The port is transmitting or receiving data at

40G/100Gbps.

Power Supply

The RG-S6520-64CQseries switchessupportpowersupplythe RG-PA800I-F. The smartpowersupplymodule supports

powermanagement,and the hostcan read input power,inputcurrent, and temperature in real time. The powersupply

modulesupports hotswapping.

The RG-S6520-64CQseries switchessupport1+1 powersupplyredundancy. To improve the stabilityandreliability

of the entire system, it is recommended to configure 1+1 power supply redundancy. When the two power supply

modules worknormally,theswitchis in the status of currentsharing.

It requires at least one power supplymodule to work normally. Filler panels need to be installed in the unoccupied

powersupplymodule slots toensureventilationand heatdissipationandavoiddusts.

Heat Dissipation

The working temperature ofthe RG-S6520-64CQswitches is 0°Cto45°C,or 32°F to 113°F, and the heatdissipation

design needs toensurethe stability,safetyand maintainabilityin such environment.The RG-S6520-64CQseries

switches adoptfanventilationand forcedconvection to ensure the device can work normallyinspecifiedenvironment.

Dustthe device every three months to avoid blocking theventilationopenings.

The RG-S6520-64CQsupports fan module M6520-FAN-Fand provides fan speedregulation,fanfailurewarning,and

fan hot swapping.

Figure 1-5 Ventilation and Heat Dissipation ofthe RG-S6520-64CQ

Hardware Installation and Reference Guide Product Overview

- 9 -

Leave sufficientspacein the front and at the back of the chassis (atleast20cm)for ventilation.

It requires atleasttwo fan modules toworknormally.Fillerpanels needtobe installed inthe unoccupied fanmodule

slots toensure ventilation andheat dissipationand avoid dusts.

Tabla de contenidos

Otros manuales de Cambiar de Ruijie

Ruijie

Ruijie RG-S5300-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6000C-48GT4XS-E Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6510 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS83-24GT4XS-PD Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-ES126S-P V2 Manual de usuario

Ruijie

Ruijie S8600E Series Instrucciones de funcionamiento

Ruijie

Ruijie RG-NBS5200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6220-H Series Manual de usuario

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Manual de usuario

Ruijie

Ruijie RG-S2915-L Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S7600 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S29 Series Manual de instalación

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5750-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS86 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5760C-X Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6100 Series Cómo utilizar

Ruijie

Ruijie 5310-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6220-48XS6QXS-H Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NIS3100 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S3250E Series Manual de usuario

Ruijie

Ruijie RG-ES109DS Manual de usuario

Ruijie

Ruijie RG-NBS1805C-P Manual de usuario

Ruijie

Ruijie RG-NIS3100 Series Manual de instalación y funcionamiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario