Ruijie RG-S6510-48VS8CQ Manual de instalación y funcionamiento

Ruijie RG-S6510-48VS8CQ Switch

Hardware Installation and Reference Guide

DocumentVersion:V1.0

Date: 2022.06.09

All rights are reservedin this documentandthis statement.

Any reproduction,excerption,backup,modification,transmission,translationorcommercial useofthis document

orany portionofthis document,in anyform orby anymeans,withoutthepriorwrittenconsentofRuijieNetworks

is prohibited.

Trademark and are ownedby RuijieNetworks.

All othertrademarks orregisteredtrademarksmentioned inthisdocumentareowned bytheirrespectiveowners.

Disclaimer

The products,services,orfeatures you purchasearesubjecttocommercialcontracts andterms. Some orallof

the products,services or features describedin this documentmaynot be withinthe scopeof your purchaseor

use.Unless otherwiseagreedin thecontract,RuijieNetworks does notmakeanyexpress or implied statement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time.RuijieNetworks reserves therightto modifythe content of the documentwithoutanynotice or prompt.

This manual is for referenceonly. Ruijie Networks endeavors to ensurecontent accuracyand will not shoulder

any responsibilityfor lossesand damagescausedduetocontent omissions,inaccuracies orerrors.

Preface

IntendedAudience

This documentis intendedfor:

Networkengineers

Technicalsupportand servicing engineers

Networkadministrators

Technical Support

Ruijie Networks Website:https://www.ruijienetworks.com/

TechnicalSupportWebsite:https://ruijienetworks.com/support

CasePortal:https://caseportal.ruijienetworks.com

Community:https://community.ruijienetworks.com

TechnicalSupportEmail:service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands,commandoptions,andkeywords arein bold font.

Italicfont

Arguments for which you supplyvalues are in italicfont.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are groupedin braces and separatedby

vertical bars.

[ x | y | z ]

Optional alternative keywords are groupedin brackets and

separatedbyvertical bars.

&<1-n>

The argumentbeforethesign(&) can be inputfor consecutive 1- n

times.

Double slashes atthe beginningofa lineof code indicate a

commentline.

2. Signs

The signs usedin this documentaredescribedas follows:

Warning

An alert that calls attention to importantrules and information thatif not understood orfollowed can resultin

data loss orequipmentdamage.

Caution

An alert that calls attention to essential information thatifnot understood orfollowed can resultin function

failure or performancedegradation.

Note

An alert that contains additional orsupplementaryinformation thatifnot understood orfollowed will notleadto

serious consequences.

Specification

An alert that contains a description ofproductor version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purposeonly.Incaseofany discrepancyorinconsistencybetween themanualand theactualversion,

the actual versionprevails.

Hardware Installation and Reference Guide Product Overview

- 4 -

1 Product Overview

RG-S6510-48VS8CQis ahigh density10GE/25GEdatacenteraccess switch,featuring25GE/100GEaccess,low latency,

and complete data center features. The RG-S6510-48VS8CQ switch, with up to 48 25GE ports and eight 100GE ports,

can be usedwiththe RG-N18000-X/RG-S6500-4Cswitchtocomposea high-performance and high-reliabilitydatacenter

network.

Model

100GE

QSFP28

Ethernet

Port

25GE/10GE

SFP28 Ethernet

Port

10GBase-T

Ethernet

Port

Expansion

Module Slot

Fan

Redundancy

Power Supply

Redundancy

RG-S6510-

48VS8CQ

N/A

3+1

1+1

An SFP28 port is compliantwith25G/10Gbase-Rbutnotcompliantwith 1000base-X.

A QSFP28 port supports both100GE/40GEmodeand 4x 25GE/4 x 10GE mode.

Specifications

Model

RG-S6510-48VS8CQ

CPU

Quad-coreprocessor,1.2GHz

BOOT ROM

8 MB

FLASH Memory

16 GB

SDRAM

DDR44 GB (Compatible:8GB)

Expansion

Module Slot

Unsupported

Expansion

Module

Unsupported

Fan Slot

4 (3+1 redundancy.At leastthree fan modulesare required.)

Fan Module

M6510-FAN-F and M6510-FAN-R

Power Supply

Slot

2 (1+1 redundancy)

Power Module

RG-PA550I-F, RG-PA550I-R, RG-PD800I-F, and RG-PHD550I-F

Power Supply

Input

AC input

Rated voltage range: 100 V AC to 240 VAC

Maximum voltage range: 90 V AC to 264V AC

Frequency: 50 Hz to 60 Hz

Rated current: 3.5 Ato 7.2A

HVDC input

Rated voltage range: 192 V DC to 288 V DC

Rated current: 3.6 A

HVDC input

Rated voltage range: 180 V DC to 400 V DC

Ratedvoltage: 336V DC

Rated current: 1.7 A

DC input

Rated voltage range: -42 V DC to -72 V DC

Ratedvoltage: -48V DC

Rated current: 23 A

Hardware Installation and Reference Guide Product Overview

- 5 -

Power

Consumption

Less than300 W

Optical Module

See Appendix.

The supported module type is subject to change without prior notification. Contact Ruijie

Networks for details.

SFP28 Port

Supported

QSFP28 Port

Supported

FC Port

Unsupported

10GBASE-T Port

Unsupported

Temperature

Alarming

Temperature alarming andover-temperatureprotection.

EMC Standards

GB9254-2008CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°Cto 45°C (32°F to 113°F)

Storage

Temperature

–40°C to +70°C(–40°F to +158°F)

Working Humidity

10% to 90% RH (non-condensing)

Net Weight

8 kg (17.64lbs., with4 fan modules and2 powermodules)

Dimensions

(W x D x H)

442mmx 387mmx 44 mm(17.40 in. x 15.24 in. x 1.73 in.), 1 RU

RG-S6510-48VS8CQ switch is a class A product. Operation of this equipment in a residential environment could

causeradiointerference,in which casethe usermayberequiredto take adequatemeasures.

The 25GE/100GE Ethernetport of the RG-S6510-48VS8CQswitchsupports DAC.For details,see Appendix.

Product Appearance

RG-S6510-48VS8CQhardwareincludes achassis,apowersupplysystem and aheat dissipation system.

Power supplysystem:Provides two power supplyslots,supporting1+1powersupplyredundancy. You are advised

to configure powersupplyredundancy.

Heatdissipation system:Provides four fan moduleslots,supporting3+1fan redundancy.You are advised to configure

all fans to implementredundancy.

Figure1-1 RG-S6510-48VS8CQSwitch Appearance

Hardware Installation and Reference Guide Product Overview

- 6 -

Front Panel

Figure 1-2 Front Panel

1. System Status LED

2. LocatorLED

3. SFP28 Port

4. SFP28 Port LED

5. QSFP28 Port

6. QSFP28 Port LED

The S6510-48VS8CQswitchsupports the 100GEQSFP28 moduleand 25GESFP28 module.

Back Panel

Figure1-3 Back Panel

1. PowerModule Slot

2. Fan Module Slot

3. LocatorLED

4. MGMT Port

5. USB 2.0 Port

6. Grounding Stud

7. AssetTag

8. System Status LED

9. Console Port

Asset Tag

Hardware Installation and Reference Guide Product Overview

- 7 -

The assettag is inthe bottom rightcornerof the back panel.The tag is movable and can be removed from the switch.You

can markthe information such as assetname,category, codeandregistrationdateon the tag for inventory control.

Figure1-4 AssetTag

Ports

The RG-S6510-48VS8CQswitchprovides the followingports:

Universal serial bus (USB)port:This port is connectedwitha USB flashdrive to save logs,software version,alarm

and other diagnosismessages.

To protect dataand avoid equipmentdamage,use aqualifiedUSBflashdrive.The USB portis compatible withmost

USB flashdrives and mayfail to identify somebrands.

The RG-S6510-48VS8CQ switch supports commissioning, configuration, maintenance, management and program

uploadingthrough theconsoleport.

Console port:The console portis anRS-232 port that uses an RJ45 connector.This port is used to connecta PC

directly to the switch for commissioning,configuration,maintenance,managementand program loading.

MGMT port: This is an out-bandEthernet port that uses anRJ45connector.This port is connectedto an Ethernet

port of a PC for program downloading.You can manageand maintain the switchremotely byconnecting the

managementportto the Ethernet port of a PC with an Ethernet cable.

SFP28 port: There are 48 25GE SFP28 ports,which supportoptical transceivers and DAC cables (10GBASE-X

compatible).

QSFP28 port: There are eight100GE QSFP28 ports,which supportoptical transceivers and DAC cables.These

ports can alsoworkin 4 x 25GE mode.

LED

Panel

Identification

Status

Meaning

System Status LED

Status

Off

System is not powered on.

Hardware Installation and Reference Guide Product Overview

- 8 -

(front panel/back

panel)

Solid red

1. System or any module fails.

2. The chassisis equippedwithless than three fan

modules.

3. The temperature exceeds thethreshold,and the

switchingservice resets.

Blinking green

System is beinginitialized.

Solid green

System is operatingnormally.

Solid yellow

1. The temperature exceeds the threshold.

2. The chassisis equippedwiththreefan modules.

3. One of the dual powers is not connected withthe

AC powercord.

LocatorLED

(front panel/back

panel)

Off

System is not being located.

Solid blue

System is beinglocated.

MGMT Port LED

MGMT

Off

No linkis detectedfor this port.

Green

The port has made a successful 10/100/1000 Mbps

link.

Blinking

The port is sending andreceiving dataat10/100/1000

Mbps.

SFP28 Port LED

1F-48F

Off

No linkis detectedfor this port.

Solid green

The port has made asuccessful 10/25Gbps link.

Blinking green

The port is sending andreceiving dataat 10/25Gbps.

QSFP28 Port LED

49F-56F

Off

No linkis detectedfor this port.

Solid green

The port has made asuccessful 40/100 Gbps link.

Blinking green

Theportis sending andreceiving dataat40/100 Gbps.

Power Supply

The RG-S6510-48VS8CQswitchsupports powermodulesRG-PA550I-Fand RG-PA550I-R. The smartpowermodules

supportpower management.The system canread outputpower, outputcurrent, and temperature in real time. The power

modules supporthotswapping.

The RG-S6510-48VS8CQ switch supports 1+1 power supplyredundancy. To improve the stabilityand reliabilityof

theentiresystem,youare advisedtoconfigure1+1powersupplyredundancy.When bothpowermodulesare working,

the switchis in the status of current sharing.

At leastone powermodule is required.Ifany slotis unoccupied,install afillerpaneltoenableproperairflow.

Heat Dissipation

The working temperature ofthe RG-S6510-48VS8CQswitchranges from 0°Cto 45°C(32°F to 113°F).The heat

dissipation design needs toensure equipmentstability,safety and maintainabilityinsuch an environment.TheRG-

S6510-48VS8CQswitchadopts fan ventilation and enforcedconvection to ensure the equipmentcanworknormallyin

the specifiedenvironment.Dustthe equipmentevery three months toavoid blockingthe ventilationopenings.

The RG-S6510-48VS8CQswitchsupports fanmodulesM6510-FAN-Fand M6510-FAN-R. The fan modules feature

speed regulation,failure alarming,and hotswapping.

Figure1-5 Airflow Direction

Hardware Installation and Reference Guide Product Overview

- 9 -

Maintain a minimum clearanceof20cm (7.87 in.) aroundthe chassisforventilation.

At least three fan modules are required. If any slot is unoccupied, install a filler panel to enable proper airflow and

avoid dust.

The powermodules and fanmoduleswithdifferentairflow directions cannotbeusedtogether.

Otros manuales para RG-S6510-48VS8CQ

Tabla de contenidos

Otros manuales de Cambiar de Ruijie

Ruijie

Ruijie RG-S2900 Series Manual de usuario

Ruijie

Ruijie Reyee RG-NBS7006 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6580-24DC8QC Manual de instalación y funcionamiento

Ruijie

Ruijie RG-N18000-XH Series Manual de instalación y funcionamiento

Ruijie

Ruijie 5310-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-ES126S-LP Manual de usuario

Ruijie

Ruijie RG-S1808 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5750-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S1920 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S7800 Series Manual

Ruijie

Ruijie RG-S6220-48XS6QXS-H Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6510-48VS8CQ Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6980-64QC Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS83-24GT4XS-PD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5000-24GT4MS-E Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6930-2C Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Manual de usuario

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Manual de usuario

Ruijie

Ruijie RG-N18000-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-PF2920-DPBOX-P Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NBS1805C-P Manual de usuario

Ruijie

Ruijie RG-CS83 Series Manual de usuario

Ruijie

Ruijie RG-S6510-32CQ Manual de instalación y funcionamiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario