RS PRO RS 1107-UT Manual de usuario

H88.0.2X.DK2RS-1.0

Operating Manual

RS 1107-UT Stock number: 205-0963

RS 1113-UT Stock number: 205-0964

rspro.com

page 2 of 24 Operating Manual RS 1107, RS 1113 
rspro.com 
Table of contents 
About this documentation......................................................4 
1 Purpose of the document................................................................4 
2 Legal notices..................................................................................4 
3 Further information.........................................................................4 
Safety.......................................................................................5 
1 Explanation of safety symbols ........................................................5 
2 Foreseeable misuse .......................................................................5 
3 Safety instructions..........................................................................6 
4 Intended use...................................................................................6 
The product at a glance..........................................................7 
1 The RS 1100 manometer series.....................................................7 
2 Display elements............................................................................7 
3 Operating elements........................................................................8 
4 Connections ...................................................................................9 
Operation...............................................................................10 
1 Opening the configuration menu...................................................10 
2 Open the adjustment menu...........................................................12 
Measurement Basics.............................................................13 
1 Special functions ..........................................................................13 
1.1 NVLL Tare function.........................................................................14 
1.2 F,NE High-resolution measurement with 0.1 Pa (RS 1107)............14 
1.3 F,NE High-resolution measurement with 1 Pa (RS 1113)...............15 
1.4 AVR0:02 / AVR0:05 / AVR0: 10........................................................16 
Operation and maintenance.................................................17 
1 Operating and maintenance notices..............................................17 
2 Battery..........................................................................................17 

Operating Manual RS 1107, RS 1113 page 3 of 24

6.2.1 Battery indicator............................................................................17

6.2.2 Changing battery..........................................................................17

7 Error and system messages.................................................18

8 Technical data .......................................................................20

8.1 RS 1107.......................................................................................20

8.2 RS 1113.......................................................................................22

9 Service ...................................................................................24

9.1 Manufacturer................................................................................24

page 4 of 24 Operating Manual RS 1107, RS 1113

rspro.com

1 About this documentation

1.1 Purpose of the document

–This document is intended as a quick reference option.

1.2 Legal notices

This document is entrusted to the recipient for personal use only. Any impermissible

transfer, duplication, translation into other languages or excerpts from this operating

manual are prohibited.

The manufacturer assumes no liability for print errors.

1.3 Further information

Software version of the product:

–V1.1 or later

For the exact product name, refer to the type plate on the rear side of the product.

Operating Manual RS 1107, RS 1113 page 5 of 24

2 Safety

2.1 Explanation of safety symbols

DANGER

This symbol warns of imminent danger, which can result in death, severe bodily injury,

or severe property damage in case of non-observance.

CAUTION

This symbol warns of potential dangers or harmful situations, which can cause damage

to the device or to the environment in case of non-observance.

NOTE

This symbol indicates processes, which can have a direct influence on operation or

can trigger an unforeseen reaction in case of non-observance.

2.2 Foreseeable misuse

The fault-free function and operational safety of the product can only be guaranteed if

applicable safety precautions and the device-specific safety instructions for this docu-

ment are observed.

If these notices are disregarded, personal injury or death, as well as property damage

can occur.

DANGER

Incorrect area of application!

In order to prevent erratic behaviour of the product, personal injury and property

damage, the product must be used exclusively as described in the chapter Description

in the operating manual.

–The product is not suitable for use in explosion-prone areas!

–The product must not be used for diagnostic or other medical purposes on pa-

tients!

–For measurements requiring devices that are subject to authorisation or special

approvals, this product is not a substitute for such products and can only be used

as an aid in preparatory or comparison measurements!

page 6 of 24 Operating Manual RS 1107, RS 1113

rspro.com

2.3 Safety instructions

NOTE

This product does not belong in children's hands!

2.4 Intended use

The device is designed as a manometer and measures even the smallest pressure

differential pressures of up to ±200 hPa with a maximum resolution of up to 0.1 Pa in

air or in non-corrosive/non-ionising gases between the two pressure connections.

RS 1107

RS 1113

Differential pressure

±200 hPa

±2000 hPa

Max. resolution

0.1 Pa

1 Pa

Usual applications include precise measurements of filter condition, gas flow pressure,

draught, leak integrity, dynamic pressure flow speed.

The pressure connection is made at the supplied interchangeable pressure connection

ports with suitable hoses.

The product must only be used under the conditions and for the purposes for which it

was designed.

It must be handled with care and used according to the technical data (do not throw,

strike, etc.). Suitable measures must be used to protect the pressure connections and

be protected from dirt and moisture.

Operating Manual RS 1107, RS 1113 page 7 of 24

3 The product at a glance

3.1 The RS 1100 manometer series

LCD Display

Front view

Top view

3.2 Display elements

Display

Battery indicator

Evaluation of the battery status

Unit display

Display of the units or Min/Max/Hold information

text

Main display

Measurement of the current pressure or value for

min/max/hold

Auxiliary display

Measurement of the current pressure in

Min/Max/Hold mode

Bar graph

Trend display with the special function F,NE

page 8 of 24 Operating Manual RS 1107, RS 1113

rspro.com

3.3 Operating elements

On / Off button

Press briefly

Switch on the product

Activate / deactivate lighting

Long press

Switch off the product

Reject changes in a menu

Up / Down button

Press briefly

Display of the min/max value

Change value of the selected parameter

Long press

Reset the min/max value of the current measure-

ment

Both simultaneously

Rotate display, overhead display

Operating Manual RS 1107, RS 1113 page 9 of 24

Function key

Press briefly

Freeze measurement (Hold)

Return to measurement display

Call up next parameter

Long press, 2s

Start menu configuration, (ONF appears in the

display

Close menu, changes are saved

Long press, 4s

Depending on the selected special function: Activa-

tion of the Tare function NVLL, high-resolution

measurement F,NE or rapid measurement with

mean value AVR

3.4 Connections

Universal connection

Interchangeable pressure connection via G1/8"

thread.

page 10 of 24 Operating Manual RS 1107, RS 1113

rspro.com

4 Operation

4.1 Opening the configuration menu

1. Press the Function key for 2 seconds to open the Configuration menu.

2. (ONF appears in the display. Release the Function key.

Parameter

Values

Meaning

Display unit

UN,T

(only at RS 1107 )

HPa

mBaR

BaR

(only at RS 1113 )

PSI

mmKG

Activatable special functions

NVLL

Tare function available

F,NE

High-resolution measurement with 0.1 Pa (RS

1107) or 1 Pa (RS 1113) activatable

AVR 0:02 / AVR

0:05 / AVR 0: 10

Rapid measurement with mean value over 2 s / 5 s

/ 10 s activatable

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de RS PRO

RS PRO

RS PRO RS-9968BT Manual de usuario

RS PRO

RS PRO RS-1150 Manual de usuario

RS PRO

RS PRO ILOM-508A Manual de usuario

RS PRO

RS PRO RS-9985 Manual de usuario

RS PRO

RS PRO 1389 Manual de usuario

RS PRO

RS PRO RS-95 Manual de usuario

RS PRO

RS PRO 623-883 Manual

RS PRO

RS PRO RS-5322 Manual de usuario

RS PRO

RS PRO RS-3893 Manual de usuario

RS PRO

RS PRO ILM 1332A Manual de usuario

RS PRO

RS PRO RS-96 Manual de usuario

RS PRO

RS PRO RS-960 Manual de usuario

RS PRO

RS PRO SLM 1353M Manual de usuario

RS PRO

RS PRO RSDPB5000 Series Manual de usuario

RS PRO

RS PRO HS-608 Manual de usuario

RS PRO

RS PRO RS 1400 Series Manual de usuario

RS PRO

RS PRO RS-320B Manual de usuario

RS PRO

RS PRO RS-90 Manual de usuario

RS PRO

RS PRO IPM 3600N Manual de usuario

RS PRO

RS PRO ILM 1335 Manual de usuario

RS PRO

RS PRO RS-136 Manual de usuario

RS PRO

RS PRO IM-194 Manual de usuario

RS PRO

RS PRO RS-135 Manual de usuario

RS PRO

RS PRO RSSA3000X Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario