Rose electronics VISTA DVI Manual de usuario

Vista DVI

Quick Start Guide

Setup

The 8-Port DVI USB KVM Switch requires no user settings or unit configuration.

Simply connect up to 8 computers and a local KVM station as outlined in the

following steps.

Computer Connections



Connect each computer to a numbered port (1-8) using a DVI-I MM video

cable.



Connect a USB Type A to Type B cable from your computers USB Type A

port to the USB Type B port on the unit.



Optionally, connect two audio cables between the Speaker or line out port

and the MIC port on the computer to the corresponding ports on the unit.

NOTE: If you are using a computer with analog video, a VGA to DVI adapter will

be needed at the switch DVI-I port

Console Connections



Connect a DVI monitor to the corresponding DVI console port on the unit



Connect a USB keyboard and USB mouse to the USB console ports with the

appropriate Icon



Optionally connect a pair of powered speakers and a microphone to the

corresponding ports on the unit.



Connect any shared USB 2.0 device (USB drive, tablet, etc.) to the USB hub

port on the switch.

NOTE: Do not connect a keyboard or mouse into the USB ports labeled “Hub;”

These ports are for optional USB shared devices.

Only one connection is necessary if using an integrated USB keyboard

and mouse.

Powering Up the System



Connect the supplied power adapter to the unit and apply power



Turn on the KVM monitor and Boot up each computer one by one



Turn on all USB peripherals

Controlling the Unit

The unit can be controlled by using keyboard hotkey sequences or the front

panel switches. Hotkey sequences provide greater control flexibility than the front

panel switches. The following table shows a complete list of the hotkey

commands and front panel switch functions.

Command Hotkeys Description

Select PC channel 1ScrLk + ScrLk + (x)

x is top row numeric key

from 1 - 8

Select the active PC channel

(joint select PC port/hub port/audio

& mike, if binding enabled

Select Hub port control 1ScrLk + ScrLk + (Fx)

Fx is Function key

F1 - F8

Select the PC channel that

controls all USB hub ports

Select audio & mike

channel 2ScrLk + ScrLk + A + (y)

y is top row numeric key

from 1 - 8

Select the active audio & mike

channel

Binding PC and hub port

control switching ScrLk + ScrLk + Z

Enable the binding of PC port and

hub port control switching. Once

enabled, any PC and/or hub

switching is bound together

(factory default).

Unbind PC and hub control

switching ScrLk + ScrLk + X

Disable the binding of PC port and

hub switching control

Binding PC audio/mike

switching ScrLk + ScrLk + Q

Enable the binding of PC port and

audio & mike control switching.

Once enabled, any PC and/or

audio/mike switching is bound

together (factory default).

Unbind PC audio/mike

control switching ScrLk + ScrLk + W

Disable the binding of PC port and

hub switching control

Next lower PC channel 1, 2 ScrLk + ScrLk + arrow up

Select the next lower PC channel

Next higher PC channel 1, 2

ScrLk + ScrLk + arrow

down Select the next lower PC channel

Previous PC channel ScrLk + ScrLk +

backspace Toggle between the previous

channel and current channel

Beep sound on/off ScrLk + ScrLk + B Toggle on/off the beep sound

while scanning

Define Hokey preceding

sequence ScrLk + ScrLk + H + (y)

y = scroll lock, caps, esc,

F12, or numlock

Select the hotkey preceding

sequence from five alternatives

Autoscan ScrLk + ScrLk + S Scan though every connected

channel. Scan delay is 5 seconds.

Autoscan with

programmable delay time ScrLk + ScrLk + S + (z)

z = top numeric keys 1 - 0

Autoscan with a user-defined

delay time from 10 -100 seconds

(1 = 10 seconds, 2 = 20 seconds,

etc.)

Stop autoscan Press any keyboard key

Front panel switch functions

Command Switch Description

Select PC channel 1Press the corresponding

button to select the active PC

channel

Select the active PC channel

(joint select PC port/hub

port/audio & mike, if binding

enabled

Select Hub port control 1Press the corresponding

button to select the active PC

channel

Select the PC channel that

controls all USB hub ports

Define Hokey preceding

sequence ScrLk + ScrLk + H + (y)

y = scroll lock, caps, esc,

F12, or numlock

Select the hotkey preceding

sequence from five

alternatives

Stop autoscan Press any button

NOTES:

1. If you have defined a different hotkey sequence other than the default

ScrLk + ScrLk, use the re-defined hotkey sequence in place of the default.

2. When the binding of the PC and the USB hub port control switching is

enabled by the hotkey sequence ScrLk + ScrLk + Z, the PC and hub will be

bound and switched together. For example, switching from PC 1 to PC 2 will

connect the KVM console to PC 2 as well as the shared USB hub. Any USB

devices on the hub will now be connected to PC 2. To remove this binding,

use ScrLk + ScrLk + X.

3. When the binding of PC, Audio & mike port control switching is enabled by

the hotkey sequence ScrLk + ScrLk + Q, the PC, audio and mike will be

bound and switch together. For example, switching from PC 1 to PC 2 will

connect the KVM console to PC 2 as well as the audio and mike. To remove

this binding, use ScrLk + ScrLk + W

4. Hotkey sequences consist of at least three specific keystrokes. Each

keystroke must be completed within 2 seconds; otherwise, the hotkey

sequence command will be aborted.

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Otros manuales para VISTA DVI

Otros manuales de Cambiar de Rose electronics

Rose electronics

Rose electronics MultiVideo MEB-4U2V Manual de usuario

Rose electronics

Rose electronics UltraView DVI Manual de usuario

Rose electronics

Rose electronics Caretaker Plus Automatic Switch Manual de usuario

Rose electronics

Rose electronics ORION Manual de usuario

Rose electronics

Rose electronics Ultraview Pro KVM SWITCH WITH ON-SCREEN... Manual de usuario

Rose electronics

Rose electronics UltraMatrix EE2-1X16U/E Instrucciones de funcionamiento y seguridad

Rose electronics

Rose electronics Vista KVL-4PCA Instrucciones de funcionamiento y seguridad

Rose electronics

Rose electronics Vista KM III/A1 Manual de usuario

Rose electronics

Rose electronics UltraLink UL-V3 Manual de usuario

Rose electronics

Rose electronics MASTER SWITCH Manual de usuario

Rose electronics

Rose electronics MultiStation Manual de usuario

Rose electronics

Rose electronics Vista DVI Plus Manual de usuario

Rose electronics

Rose electronics ServeView Pro SEB-8UB Manual de usuario

Rose electronics

Rose electronics RP2-1R2X16U Manual de usuario

Rose electronics

Rose electronics UEB-8UB Manual de usuario

Rose electronics

Rose electronics UltraView Manual de usuario

Rose electronics

Rose electronics switch/hub Manual de usuario

Rose electronics

Rose electronics Vista Remote 2 Manual de usuario

Rose electronics

Rose electronics Porter PO-4P Manual de usuario

Rose electronics

Rose electronics UltraView Pro Manual de usuario

Rose electronics

Rose electronics UltraConsole Remote UCR-1R1X04U Manual de usuario

Rose electronics

Rose electronics ORION lc Manual de usuario

Rose electronics

Rose electronics UltraMatrix Remote 2 Manual de usuario

Rose electronics

Rose electronics UltraMatrix AV DVI Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario