Rose electronics MultiVideo HDMI MDM-4T2HD-A1MultiVideo HDMI... Manual de usuario

MultiVideo

HDMI

1×4 Multi

-head KVM Switch • HDMI • USB2.0 • Audio

Installation

and

Operation Manual

10707 Stancliff Road

Houston, Texas 77099

Phone: (281) 933-7673

[email protected]

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

manual-multivideo-hdmi-2018-04-21

Rose Electronics®warrants the MultiVideo HDMI KVM Switch to be in good working order for one year from

the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good

working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or

replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All

replaced parts become the property of Rose Electronics. This limited warranty does not include service to

repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,

including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

TABLE OF CONTENTS

Contents

Disclaimer 1

System Introduction 1

Features 1

Package Contents 2

Additional Items that may be required 2

MultiVideo HDMI Models 3

Installing the MultiVideo HDMI Switch 5

Operation 6

Controlling the Multivideo HDMI 6

Front Panel Control 6

Hotkey Commands 6

Control using the RS-232 port 7

Establish a connection to the Multivideo HDMI switch 7

EDID Learning and Programming 8

Safety 9

Maintenance and Repair 10

Technical Support 10

Figures

Figure 1. MultiVideo HDMI Dual Front Panel 3

Figure 2. MultiVideo HDMI Dual Rear Panel 3

Figure 3. MultiVideo HDMI Quad Front Panel 4

Figure 4. MultiVideo HDMI Quad Rear Panel 4

Figure 5. MultiVideo HDMI Dual typical application 5

Figure 6. Front Panel Buttons 6

Figure 7. Examples of 9 pin RS-232 Straight Through and Crossed Cables 7

Figure 8. Identifying Serial Ports on Window Device Manager 7

Tables

Table 1. Keyboard hotkey and RS-232 serial port commands 6

Appendices

Appendix A —Specifications 11

Appendix B —Part Numbers 12

INTRODUCTION

MultiVideo HDMI KVM Switch Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting

from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, circuitry of the product, and manual content at any time without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product (See limited warranty).

System Introduction

Thank you for choosing the MultiVideo HDMI. It is the result of Rose Electronics commitment to providing

state-of-the-art solutions for today’s demanding workplace. It is capable of switching up to four dual-head or

quad-head HDMI computers through a single user console.

The MultiVideo HDMI is HDMI compliant, and supports screen resolutions up to 4K Ultra-HD (3840x2160 @

30Hz). Up to four USB 2.0 devices can be connected to the unit, which can be switched in tandem with the

video or separately. The switch can be controlled through the front panel buttons, keyboard hoot-key

commands, or from a computer through an RS-232 interface. A separate analog audio interface can also be

switched in tandem or independently. The HDMI signal also passes the embedded audio with no restriction.

EDID pass-through and full USB and mouse emulation of all connected monitors, keyboards and mice allow for

smooth switching.

Features

■Quad-head or dual-head HDMI video input

■Resolutions up to 3840×2160 @ 30 Hz

■HDMI 1.4a compliant

■Full USB keyboard and mouse emulation to all computers provides switching without interruption

■Independent switching of KVM, peripheral USB devices, and audio

■Unit can be controlled using front panel push buttons, keyboard hot key commands, or RS-232 commands

from an external controller

■Front panel LEDs indicate the active computer connection

■Can be used with any major operating system: Windows, Linux, MAC OS

■EDID pass-through enables smooth and efficient switching

■Mounts in a standard 19 inch rack

MultiVideo HDMI KVM Switch Manual 2

Package Contents

The package contents consist of the following items:

■MultiVideo HDMI Switch

■External power supply

■Power cable

■User Manual

Additional Items that may be required

■USB Type A to USB Type B M/M cable

■HDMI to HDMI M/M cable

■Stereo 3,5mm audio M/M cable

■Serial DB9 M/F cable

These cables can be ordered separately from Rose Electronics.

MultiVideo HDMI KVM Switch Manual 3

MultiVideo HDMI Models

The MultiVideo HDMI comes as a dual-head or quad-head KVM switch.

Figure 1. MultiVideo HDMI Dual Front Panel

Figure 2. MultiVideo HDMI Dual Rear Panel

MultiVideo HDMI KVM Switch Manual 4

Figure 3. MultiVideo HDMI Quad Front Panel

Figure 4. MultiVideo HDMI Quad Rear Panel

MultiVideo HDMI KVM Switch Manual 5

Installing the MultiVideo HDMI Switch

Installation of the MultiVideo HDMI is very simple.

Figure 5. MultiVideo HDMI Dual typical application

Ensure that power is disconnected from MultiVideo HDMI.

1. Connect HDMI cables and USB type A to type B cables between each computer and its respective

ports on the MultiVideo HDMI.

2. If desired, use 3.5mm stereo jack audio cables (male to male) to connect the computers’ analog audio

line out ports to their respective audio input ports on the switch.

3. Optionally connect a serial control cable from an external controller to the DB9 connector.

4. Connect the console displays to the video output connectors.

5. Connect the USB keyboard and mouse to the unit’s console keyboard and mouse connectors located

at the lower right hand side of the rear panel.

6. Optionally connect analog audio output equipment to the 3.5mm analog output stereo jack.

7. Optionally connect up to two USB 2.0 devices (flash drive, printer, etc.) to the USB 2.0 connectors.

8. Apply power to the MultiVideo HDMI.

MultiVideo HDMI KVM Switch Manual 6

Operation

Controlling the Multivideo HDMI

The computers on the Multivideo HDMI can be switched using the buttons on the Front Panel, through

keyboard hot-key commands, or RS-232 commands. The video, keyboard, and mouse can all be switched

simultaneously or independently of each other. Each of these is described below.

Front Panel Control

To switch ports using the front panel, press the ▲button to navigate up and ▼button for down.

Figure 6. Front Panel Buttons

Hotkey Commands

A Hotkey command is a keyboard sequence used to trigger an action on the Multivideo HDMI through the use

of the keyboard connected on the USB port of the Multivideo HDMI. To activate the hotkey sequence, press

the CTRL key twice and then enter the desired hotkey commands.

Commands Hotkeys RS-232 Control

Switch all devices (KVM, USB 2.0, and

Audio) [CTRL] [CTRL] m [port#] [ENTER] //m[port #][cr]

Switch KVM only [CTRL] [CTRL] c [port#] [ENTER] //c[port #][cr]

Switch audio only [CTRL] [CTRL] a [port#] [ENTER] //a[port #][cr]

Switch USB2.0 only [CTRL] [CTRL] u [port#] [ENTER] //u[port #][cr]

Switch analog audio only [CTRL] [CTRL] a [port#] [ENTER] //a[port #][cr]

EDID learning [CTRL] [CTRL] e [ENTER] //e[cr]

Same as front panel ▲button [CTRL] [CTRL]

↑

(up arrow key) n/a

Same as front panel ▼button [CTRL] [CTRL] ↓ (down arrow key) n/a

Reset [CTRL] [CTRL] r //r

Reset to factory defaults [CTRL] [CTRL] f //f

Table 1. Keyboard hotkey and RS-232 serial port commands

MultiVideo HDMI KVM Switch Manual 7

Control using the RS-232 port

Controlling the Multivideo HDMI via RS-232 requires an RS-232 card installed on your computer or a USB to

RS-232 adapter. Below are instructions on how to create an RS-232 connection between a PC and the

Multivideo HDMI switch.

Use a terminal client software to connect the host PC or notebook to the switch. Make sure to use

communication settings 9600 bps, N, 8, 1 No flow control.

Check the device and your PC to determine if you need a male to male or a male to female cable and how long

it needs to be. The Multivideo HDMI requires a straight through cable. You can use a Null Modem Adapter to

convert a crossed cable to a straight through cable. Examples of crossed and straight thorough cable pin-outs

are shown below. The standard maximum length for an RS-232 cable is 50 feet (15 meters).

Figure 7. Examples of 9 pin RS-232 Straight Through and Crossed Cables

Establish a connection to the Multivideo HDMI switch

1. Connect an RS-232 cable to the RS-232 connector on the PC.

2. Connect the other end of the cable to the RS-232 port of the Multivideo HDMI.

3. On Windows, use the Windows Control Panel / Device Manager to identify the COM port number. See

instructions and Figure 8. below.

4. Power on the device.

Figure 8. Identifying Serial Ports on Window Device Manager

Tabla de contenidos

Otros manuales de Cambiar de Rose electronics

Rose electronics

Rose electronics Video Easyware Manual del propietario

Rose electronics

Rose electronics UltraMatrix AV Manual de usuario

Rose electronics

Rose electronics UltraView Manual de usuario

Rose electronics

Rose electronics UltraLink UL-V3 Manual de usuario

Rose electronics

Rose electronics ORION lc Manual de usuario

Rose electronics

Rose electronics RP2-1R2X16U Manual de usuario

Rose electronics

Rose electronics RE2-1R2X16U Manual de usuario

Rose electronics

Rose electronics Xtensys Manual de instrucciones

Rose electronics

Rose electronics ServeView Pro Manual de usuario

Rose electronics

Rose electronics switch/hub Manual de usuario

Rose electronics

Rose electronics QuadraVista Manual de usuario

Rose electronics

Rose electronics VISTA DVI Manual de usuario

Rose electronics

Rose electronics B - Chassis Manual del propietario

Rose electronics

Rose electronics Vista KVL-4PCA Manual de usuario

Rose electronics

Rose electronics Orion X OXS-CH288-00 Manual de usuario

Rose electronics

Rose electronics x series Manual de usuario

Rose electronics

Rose electronics UltraMatrix EE2-1X16U/E Manual de usuario

Rose electronics

Rose electronics Ultraview Pro UKT-KVM-1U08-Z Manual de usuario

Rose electronics

Rose electronics Porter PO-4P Manual de usuario

Rose electronics

Rose electronics KVM-4THD/4K Manual de usuario

Rose electronics

Rose electronics Ultraview Remote 2 Manual de usuario

Rose electronics

Rose electronics SuperSwitch SS-9 Manual de usuario

Rose electronics

Rose electronics UltraMatrix EE2-1X16U/E Instrucciones de funcionamiento y seguridad

Rose electronics

Rose electronics MasterSwitch MS-5P Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario