Rose electronics QuadraVista Manual de usuario

QUADRAVISTA™ QUAD VIDEO KVM SWITCH

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.CO

Quick Installation Guide

QuadraVista Quick Start Guide

The QuadraVista has been designed to take the guesswork out of the installation

process. The auto-sensing features will determine the type of video monitor

each of the four connected computer has, digital or analog. QuadraVista also will

determine the type of keyboard (USB, PC1, PC2, PC3) and mouse (USB, PS/2,

PS/2 wheel). With these features, you will be up and running in no time.

First, make sure that power is off on QuadraVista and all computers being

connected. Next, connect your KVM user station as shown below. Connect a

USB mouse and USB keyboard to the corresponding USB ports. If a PS/2

keyboard and mouse are used, a PS/2 to USB converter must be used. Next,

connect a VGA or DVI monitor to the DVI-I port. If a VGA monitor is used, a VGA

to DVI converter cable must be used.

Connect up to four computers to the corresponding video (DVI-I),

keyboard/mouse ports on the QuadraVista as shown below.

If a VGA (HD15F) connector is on the computer, a VGA to DVI cable must be

used. If the keyboard and mouse are PS/2, use a PS/2 "Y" cable.

Apply power to the QuadraVista, then computers and user

station monitor. The KVM user stations monitor will display

in the quad mode, all connected computers video.

Refer to the Installation and Operations manual for

additional information about the on-screen menus and other

configurations that can be performed.

KVM user station

QuadraVista Quick Start Guide

Keyboard commands

(Default "HOTKEY" is the CTRL + ALT keys pressed at the same time

followed by the needed command)

Command* Description

"HOTKEY" + Q Change display to quad mode

"HOTKEY" + F Change display to full screen mode

"HOTKEY" + P Change display to PIP function

"HOTKEY" + 1 Switch to computer 1 (Full Screen)

"HOTKEY" + 2 Switch to computer 2 (Full Screen)

"HOTKEY" + 3 Switch to computer 3 (Full Screen)

"HOTKEY" + 4 Switch to computer 4 (Full Screen)

"HOTKEY" + F1 Switch to quad mode and activate channel 1

"HOTKEY" + F2 Switch to quad mode and activate channel 2

"HOTKEY" + F3 Switch to quad mode and activate channel 3

"HOTKEY" + F4 Switch to quad mode and activate channel 4

"HOTKEY" + O Invoke the on-screen menu system

"HOTKEY" + I PIP menu

"HOTKEY" + V Reset video resolution to default setting

(640 x 480 @ 60 Hz)

The QuadraVista has been designed to take the guesswork out of the

installation process. The auto-sensing features will determine the type of

video monitor each of the four connected computer has, digital or analog.

QuadraVista also will determine the type of keyboard (USB, PC1, PC2, PC3)

and mouse (USB, PS/2, PS/2 wheel). With these features, you will be up and

running in no time.

First, make sure that power is off on QuadraVista and all computers being

connected. Next, connect your KVM user station as shown below. Connect

a USB mouse and USB keyboard to the corresponding USB ports. If a PS/2

keyboard and mouse are used, a PS/2 to USB converter must be used.

Next, connect a VGA or DVI monitor to the DVI-I port. If a VGA monitor is

used, a VGA to DVI converter cable must be used.

Connect up to four computers to the corresponding video (DVI-I),

keyboard/mouse ports on the QuadraVista as shown below.

If a VGA (HD15F) connector is on the computer, a VGA to DVI cable must be

used. If the keyboard and mouse are PS/2, use a PS/2 "Y" cable.

KVM user station

QuadraVista Quick Start Guide

Apply power to the QuadraVista, then computers and

user station monitor. The KVM user stations monitor will

display in the quad mode, all connected computers

video.

Refer to the Installation and Operations manual for

additional information about the on-screen menus and

other configurations that can be performed.

Keyboard commands

(Default "HOTKEY" is the CTRL + ALT keys pressed at the same time

followed by the needed command)

Command* Description

"HOTKEY" + Q Change display to quad mode

"HOTKEY" + F Change display to full screen mode

"HOTKEY" + P Change display to PIP function

"HOTKEY" + 1 Switch to computer 1 (Full Screen)

"HOTKEY" + 2 Switch to computer 2 (Full Screen)

"HOTKEY" + 3 Switch to computer 3 (Full Screen)

"HOTKEY" + 4 Switch to computer 4 (Full Screen)

"HOTKEY" + F1 Switch to quad mode and activate channel 1

"HOTKEY" + F2 Switch to quad mode and activate channel 2

"HOTKEY" + F3 Switch to quad mode and activate channel 3

"HOTKEY" + F4 Switch to quad mode and activate channel 4

"HOTKEY" + O Invoke the on-screen menu system

"HOTKEY" + I PIP menu

"HOTKEY" + V Reset video resolution to default setting

(640 x 480 @ 60 Hz)

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Otros manuales para QuadraVista

Tabla de contenidos

Otros manuales de Cambiar de Rose electronics

Rose electronics

Rose electronics ORION lc Manual de usuario

Rose electronics

Rose electronics UltraMatrix Remote 2 Manual de usuario

Rose electronics

Rose electronics UltraMatrix AV HD Manual de usuario

Rose electronics

Rose electronics ServeView 2X Manual de usuario

Rose electronics

Rose electronics Vista L SERIES Manual de usuario

Rose electronics

Rose electronics UltraLink UL-V3 Manual de usuario

Rose electronics

Rose electronics Xtensys Manual de usuario

Rose electronics

Rose electronics QuadraVista Manual de usuario

Rose electronics

Rose electronics UltraMatrix EE2-1X16U/E Manual de usuario

Rose electronics

Rose electronics UltraLink 2 Manual de usuario

Rose electronics

Rose electronics UltraView Manual de usuario

Rose electronics

Rose electronics Vista Remote 2 Manual de usuario

Rose electronics

Rose electronics Vista AV Manual de usuario

Rose electronics

Rose electronics UltraMatrix AV Manual de usuario

Rose electronics

Rose electronics UltraConsole Remote UCR-1R1X04U Manual de usuario

Rose electronics

Rose electronics ServeView Pro SEB-8UB Manual de usuario

Rose electronics

Rose electronics Vista KVL-4PCA Instrucciones de funcionamiento y seguridad

Rose electronics

Rose electronics Vista L SERIES Manual de usuario

Rose electronics

Rose electronics MultiStation Manual de usuario

Rose electronics

Rose electronics Ultraview Pro UKT-KVM-1U08-Z Manual de usuario

Rose electronics

Rose electronics UltraConsole UC1-1X16U Manual de usuario

Rose electronics

Rose electronics UltraLink UL-DV3 Manual de usuario

Rose electronics

Rose electronics UltraLink 2 Manual de usuario

Rose electronics

Rose electronics MultiStation ML-2U Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario