Rose electronics X series Manual de usuario

UltraMatrix Single unit Installation

The following installation procedure features the 4XE model. Installation for

other models (2, 4, or 8 computers) follow the same basic procedure.

It is recommended that power to all monitors, computers, and UltraMatrix be off

until all connections have been made.

The below illustration shows the basic cable connections for UltraMatrix and the

installation steps to properly connect the cables, computers, and KVM stations

to UltraMatrix.

1. Connect a KVM station to the KVM 1 DB25F connector using the

appropriate KVM adapter cable. Depending on the model, connect other

KVM stations to the KVM x DB25F connector.

2. Connect the computers to UltraMatrix using the appropriate CPU adapter

cable. Connect the keyboard, monitor, and mouse computer ports to the

corresponding connectors on the CPU adapter cable. Connect the DB25M

connector to the CPU DB25F connector on UltraMatrix.

3. Connect other computers (4, 8, 12, or 16 depending on model)

4. With all cabling in place, power on all monitors, the UltraMatrix switch, and

boot the computers last.

Please refer to the Installation and Operations manual for the installation

procedure for an expanded system.

KVM Station

KVM adapter

cable

CPU adapter

cable

Operating Instructions

With all cabling in place and power applied to all equipment, the video monitor

connected to KVM port #1 should display the video from computer #1 (default).

Switching to other computers is accomplished by:

1. Keyboard commands (press and release left Ctrl key + CPU #)

(LCtrl + 3 switches to port #3)

2. On-Screen-Display list of computers (Left Ctrl + Esc key)

3. Remotely using the RS232 port and sending switching commands from a

remotely connected computer using a communication program like

HyperTerminal. (Sending K2C8S, enter, switches KVM #2 to CPU port #8)

Additional keyboard commands are available for other switching methods,

invoking the scan mode, and others. See Table 1 for a list of keyboard

commands and their functions.

The OSD provides a visual interface to the features, set-up and additional

functions. The OSD is invoked by pressing and releasing the left Ctrl key, then

the F12 key. The below menu will display for configuring the System,

Computers, KVM. User, Profile, Group, and Language. Refer to the Installation

and Operations manual for a detailed description of each menus features and

options.

To navigate through the menu system, use the arrow keys to select the

configuration menu needed and press [Enter]. When you press [Enter] that

menu will display, an input box will display for a new value, or a list of

supported choices will display. Enter or select the information needed and

press [Enter]. To return to the previous page or abort an input, press the [Esc]

key.

No part of this publication may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission of

Rose Electronics.

Rose Electronics Part # QS-UME

Printed In the United States of America

Keyboard commands

The following table describes the available keyboard commands. The [Ctrl] key

sequence is a press and release of the left control key. Commands following

[Ctrl] must be entered within 2 seconds.

Command

Key sequence

Description

Main Menu

[Ctrl] [F12]

Displays main menu

CPU List

[Ctrl] [Esc]

Displays CPU selection list

Direct CPU

connect

[Ctrl] n [Enter]

Connects directly to the specific

CPU number “n”.

Connect

Back

[Ctrl] [Backspace]

Connects to the previous CPU

Connect

Down

[Ctrl] [Minus sign]

Connects to the previous CPU

in a Group.

Connect Up

[Ctrl] [Plus sign]

Connects to the next sequential

CPU in a group

KVM Status

[Ctrl] D

Displays / Removes status box.

Logout

[Ctrl] L

Logs user out if the KVM station

is configured for user logins.

Disconnect

[Ctrl] Q

Disconnects the current CPU

Reset

Keyboard/

mouse

[Ctrl] R

Resets / enables keyboard and

mouse; enables PS/2 mouse on

connected CPU

Send Null

Byte

[Ctrl] N

Sends a null byte to the CPU’s

PS/2 mouse port. Use this

command if the PS/2 mouse

gets “out of sync”.

Reset Mouse

(NT or Unix

systems only)

[Ctrl] O (not zero)

Resets the currently selected

NT or Unix computers PS/2

mouse. Also switches the NT

mouse driver to “wheel” mode.

Start Scan

[Ctrl] S

Sequentially steps through all

connected CPUs in a group.

Stop Scan

[Ctrl] X

Turns scan “Off”

Table 1 - Keyboard Commands

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Rose electronics

Rose electronics

Rose electronics Xtensys Manual de instrucciones

Rose electronics

Rose electronics MultiStation Manual de usuario

Rose electronics

Rose electronics UltraView Pro Manual de usuario

Rose electronics

Rose electronics UltraView Manual de usuario

Rose electronics

Rose electronics ServeView 2X Manual de usuario

Rose electronics

Rose electronics Vista L SERIES Manual de usuario

Rose electronics

Rose electronics UltraMatrix AV Manual de usuario

Rose electronics

Rose electronics QuadraVista Manual de usuario

Rose electronics

Rose electronics MultiVideo Manual de usuario

Rose electronics

Rose electronics QuadraVista Manual de usuario

Rose electronics

Rose electronics QuadraVista Manual de usuario

Rose electronics

Rose electronics Video Easyware Manual del propietario

Rose electronics

Rose electronics Vista KVL-4PCA Manual de usuario

Rose electronics

Rose electronics Xtensys XTS-V16x64D16-L Manual de usuario

Rose electronics

Rose electronics Vista LC DVI Manual de usuario

Rose electronics

Rose electronics ServeView Pro SEB-8UB Manual de usuario

Rose electronics

Rose electronics UltraLink UL-DV3 Manual de usuario

Rose electronics

Rose electronics Vista KVL-4PCA Manual de usuario

Rose electronics

Rose electronics ORION lc Manual de usuario

Rose electronics

Rose electronics UEB-8UB Manual

Rose electronics

Rose electronics Caretaker Plus Automatic Switch Manual de usuario

Rose electronics

Rose electronics Vista DVI Plus Manual de usuario

Rose electronics

Rose electronics UltraView Pro Professional Series Manual de usuario

Rose electronics

Rose electronics Ultraview Pro UKT-KVM-1U08-Z Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Rose electronics x series Manual de usuario

Manuales populares de Cambiar de otras marcas