Roland DWP-80S Manual de usuario
User's Manual
Roland DG Corporation has developed a special website introducing dental solutions.
For the latest information regarding this machine (including manuals), see Roland DG
Corporation’s special Easy Shape website (http://www.rolandeasyshape.com).
2
Chapter 1 Getting Started ................................................................................................... 4
Layered Projection Technology Printing.....................................................................................................5
Advantages of Using Layer Exposure Method to Print Objects One Layer at a Time ...............5
Modeling Machine ...............................................................................................................................................6
Quick Denta ............................................................................................................................................................8
Start-up ..................................................................................................................................................................10
Status Indicated by LED Lamp on Power Button ..................................................................................11
Optimizing the Display Settings for the Machine ................................................................................11
Shutdown ............................................................................................................................................................. 13
Using the Storage ..............................................................................................................................................13
Chapter 2 Output ............................................................................................................... 14
Output Procedure ............................................................................................................................................. 15
Importable File Formats ..................................................................................................................................15
Step 1: Check that the Liquid Material Vat is Not Dirty ......................................................................16
Step 2: Install the Liquid Material Vat in the Machine ........................................................................ 17
Step 3: Verify that the Printing Platform is Not Dirty ...........................................................................20
Step 4: Adjust the Initial Printing Height (Z0) ........................................................................................ 20
Step 1: Prepare the 3D Model Data ............................................................................................................23
Step 2: Create the Printing File .....................................................................................................................23
Step 1: Add Resin to the Liquid Material Vat ..........................................................................................28
Step 2: Send the Print Data ............................................................................................................................ 30
Step 3: Remove the Job .................................................................................................................................. 31
Step 4: Post-print Processing ........................................................................................................................33
Maintenance after Use .................................................................................................................................... 36
Print Multiple Objects Simultaneously ..................................................................................................... 41
Increase or Decrease the Number of Supports .....................................................................................41
Correct Errors when Importing STL Data .................................................................................................42
Fine-tuning the Print Conditions ................................................................................................................ 43
Check the Actual Printing Status ................................................................................................................. 44
Showing the Estimated Cost .........................................................................................................................45
Add/Delete Supports .......................................................................................................................................46
Determine the Angle when Importing STL Files ...................................................................................49
Align Object to Platform ................................................................................................................................. 50
Chapter 3 Maintenance ..................................................................................................... 51
Check That the Liquid Material Vat Is Not Cloudy ................................................................................53
Contents
Contents
Replace Liquid Material Vat ........................................................................................................................... 54
Replace the Projector ....................................................................................................................................... 54
Chapter 4 Appendix ........................................................................................................... 55
The Machine Doesn't Work ...........................................................................................................................56
Printing Fails ........................................................................................................................................................ 56
Installing the DWP-80S Driver Separately ...............................................................................................59
Installing the Projector Driver Separately ................................................................................................60
Installing Quick Denta or the Manuals Separately ............................................................................... 64
DWP-80S Driver Installation Is Impossible ...............................................................................................66
Uninstalling the DWP-80S Driver ................................................................................................................ 67
Driver for the Projector Does Not Operate Correctly ..........................................................................68
Uninstalling the Driver for the Projector ..................................................................................................70
Correct Installation of the DWP-80S Driver Is Impossible (Listed as “Unspecied”) ...............70
Checking the Quick Denta Version .............................................................................................................72
Location of Power Rating and Serial Number Label ............................................................................75
External Dimensions .........................................................................................................................................76
Specications ...................................................................................................................................................... 77
System Requirements for USB Connection .............................................................................................77
Windows®is a registered trademarks or trademarks of Microsoft®Corporation in the United States and/or other
countries.
Other company names and product names are trademarks or registered trademarks of their respective holders.
Copyright © 2016 Roland DG Corporation http://www.rolanddg.com/
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The contents of this operation manual and the specications of this product are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you nd any misprint
or error, please inform Roland DG Corporation.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may occur
through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may occur with
respect to any article made using this product.
• At the time of purchase, verify that the provided warranty is axed with the dealer's signature, address, and
purchase date. Keep this warranty in a safe location.
3
Chapter 1 Getting Started
Features of This Machine ..................................................................................................................5
Layered Projection Technology Printing.........................................................................5
Advantages of Using Layer Exposure Method to Print Objects One Layer at a Time ......5
Part Names.............................................................................................................................................6
Modeling Machine..................................................................................................................6
Quick Denta...............................................................................................................................8
Basic Operation................................................................................................................................. 10
Start-up .................................................................................................................................... 10
Status Indicated by LED Lamp on Power Button...................................................... 11
Optimizing the Display Settings for the Machine .................................................... 11
Shutdown................................................................................................................................ 13
Using the Storage................................................................................................................. 13
4
Chapter 1 Getting Started
Features of This Machine
Layered Projection Technology Printing
The DWP-80S is a 3D printer that uses layered projection technology.
This machine uses photo-curable resin (referred to simply as "resin" in this manual), a uid that hardens (cures)
when exposed to light (UV rays), and a projector with a UV LED light source to print an object based on 3D data.
"P.14 "Chapter 2 Output"
Advantages of Using Layer Exposure Method to Print Objects One Layer at a Time
The printing method whereby a le for printing is sliced into layers at regular intervals, each of which is exposed
(irradiated with light) by a projector one layer at a time, is referred to as the layer exposure method.
This printing method makes it possible to print multiple jobs simultaneously and to print complex shapes with
undercuts.
"P.41 "Print Multiple Objects Simultaneously"
5
Chapter 1 Getting Started
Modeling Machine
Exterior
USB
No. Name Explanation
Front cover
Before starting operation and during operation, close
the front cover.
The front cover is orange to make it dicult for UV
rays to pass through.
Power button (P.10)
Storage The storage can be used to store the level gauge
and wrenches.
Rubber feet (×4, with height adjustment
screws) Used to adjust the tilt of the machine.
Power-cord connector
WARNING Do not use any electrical power supply that does not meet
the ratings displayed on the AC adapter.
Doing so may result in re or electrical shock.
WARNING Never use any AC adapter or power cord other than those
included with the machine.
Doing so may result in re or electrical shock.
WARNING Handle the AC adapter, power cord, plug, and electrical
outlet correctly and with care. Never use any article that is
damaged.
Using a damaged article may result in re or electrical shock.
USB connector
CAUTION For the USB cable, use the included cable.
The computer may not be able to communicate with the
computer correctly.
Part Names
6
Chapter 1 Getting Started
Inside the Front Cover
No. Name Explanation
Z-axis unit (inside red box) The Z-axis unit moves the printing platform.
Printing platform retaining screw The printing platform retaining screw secures the
printing platform.
Z0 adjustment screw When setting the initial printing height (Z0), loosen the
Z0 adjustment screw.
Printing platform The printing platform is where the job is created. The job
is printed while the printing platform is raised.
Shutter lever
By installing the liquid material vat, the UV irradiation
outlet shutter on the bottom of the liquid material vat is
opened.
UV irradiation outlet (with shutter) When the shutter opens, UV rays are emitted from the
machine.
Liquid material vat stopper
The liquid material vat stopper secures the liquid
material vat in place. When the stopper is disengaged,
the liquid material vat moves forward.
Liquid material vat retaining screws The liquid material vat retaining screws secure the liquid
material vat holder.
Liquid material vat The liquid material vat is the container to which resin for
modeling is added.
Liquid material vat holder The liquid material vat holder is a frame for securing the
liquid material vat.
Part Names
7
Chapter 1 Getting Started
Quick Denta
This section provides an overview of the Quick Denta screens. For details, see the Quick Denta help.
Title bar
Displays the le name and the resin model number. The title bar
contains buttons to maximize or minimize the screen, to return the
screen to its original size, and to close the screen.
Function tab Displays the four main functions of Quick Denta. Clicking a function
opens that function's tab.
Operation palette Displays the operation buttons and settings on the Function tab.
Main view Displays imported 3D model data. The content displayed diers
depending on the selected function tab.
Toolbar
Displays the operation buttons for changing the position and view
status of objects displayed in the main view. Hovering the mouse
pointer above a button will display that button’s functions.
Status bar
Displays the status of operations performed using Quick Denta,
including the estimated print time and estimated job volume for the
resin.
Coordinate axis Displays the direction of the XYZ axes.
Objects Objects are imported 3D data. The view status can be changed
through the operations of the function tab and tool bar.
Part Names
8
Chapter 1 Getting Started
How to View Help 1
Click (lower right part of the screen) in the tool bar.
How to View Help 2
Procedure
A Click .
B Click [Help].
Part Names
9
Chapter 1 Getting Started
Basic Operation
Start-up
Procedure
A Close the front cover.
B Press the power button on the printing machine.
The initial operation starts. When the light on the power button stops ashing and remains steadily lit,
initial operation is complete.
USB
C Start Quick Denta.
Windows 10
1
Click [Start] .
2
Click [All apps].
3
Click the [Quick Denta] icon under [Quick Denta].
Windows 8.1
1
On the [Start] screen, click .
2
On the [Apps] screen, click [Quick Denta].
Windows 7
1
Click [Start] .
2
Click the [All Programs] (or [Programs]).
3
Click the [Roland DWP-80S] folder, and then click [Quick Denta].
10
Tabla de contenidos
Otros manuales de Impresora 3D de Roland
Roland
Roland MDX-40A Manual de usuario
Roland
Roland monoFab ARM-10 Manual de usuario
Roland
Roland monoFab ARM-10 Manual de usuario
Roland
Roland monoFabARM-10 Manual de usuario
Roland
Roland monoFab ARM-10 Guía de configuración
Roland
Roland Modela MDX-40 Manual de usuario
Roland
Roland iModela Instrucciones de funcionamiento
