Rointe SYGMA STN030SEB2 Guía de configuración

SYGMA

INSTRUCTIONS MANUAL

SYGMA DIGITAL

ELECTRIC TOWEL RAIL

MOUNTING, INSTALLATION,

STARTING AND OPERATION

SYGMA

WELCOME

Dear Customer,

Thank you for choosing the SYGMA digital electric towel rail, with an

exclusive electronic temperature programmer and made with the

highest quality materials especially for you.

The SYGMA digital electric towel rail have exceeded the most

stringent quality controls in order to comply with the most rigorous

requirements for safety.

Before using the SYGMA digital electric towel rail, we recommend

that you read this instruction manual in order to ensure correct

operation.

IMPORTANT

THIS MANUAL SHOULD BE LEFT WITH THE PRODUCT AFTER

INSTALLATION

TABLE OF CONTENTS

1. DESCRIPTION OF THE SYGMA TOWEL RAIL.............................. 4

1.1. Front Panel Parts ................................................................. 4

1.2. Switching On & Off (stand-by) .............................................. 5

1.3. Setting the day and time....................................................... 6

1.4. Locking the Control Panel.................................................... 7

1.5. Temperature Selection......................................................... 7

1.6. Manual/Automatic Mode ...................................................... 7

1.7. Two-hour Boost Mode (2H)................................................... 8

1.8. Open windows function......................................................... 8

1.9. Screen brightness function .................................................. 9

2. PROGRAMMING THE SYGMA TOWEL RAIL .............................. 10

3. MOUNTING INSTRUCTIONS ..................................................... 12

4. CONNECTING INSTRUCTIONS ................................................. 13

4.1. SYGMA Towel Rail Technical Characteristics .................... 15

4.2. Specific Regulations for Bathrooms .................................. 17

5. MAINTENANCE & CLEANING................................................... 17

5.1. Safety .................................................................................. 18

6. GUARANTEE.............................................................................. 18

ENGLISH

ATTENTION:

If you are the owner of a model bought in the UK or Éire, please refer

ONLY to its manual as the specifications of the towel rails are different.

SYGMA

TFT DISPLAY

CONTROL PANEL

1. DESCRIPTION OF THE SYGMA TOWEL RAIL

1.1. Front panel parts

1.1.1. TFT display symbols

SEGMENT INDICATION

1PROGRAMMING

2DAYS OF THE WEEK

3TIME OF DAY

4TEMPERATURE SELECTED

5OPEN WINDOW FUNCTION

6TOWEL RAIL HEATING

7MANUAL / AUTOMATIC FUNCTION

8COMFORT / ECO / ANTI-FROST MODE

9LOCKING THE CONTROL PANEL

1.2. Switching On & Off (stand-by)

By pressing the key , we switch the towel rail on or off. The following

SYGMA

image will appear on the screen when switched on:

The screen will automatically go into sleep mode if no button is pushed

for 10 seconds. By pushing the button again the towel rail will go into

standby mode with the word “Standby” appearing followed by the

Rointe logo.

1.3. Setting the day and time

In order to adjust the time and day of the week, please follow the

steps below. First we choose the hour, then the minutes, then the

day of the week.

To enter the time and day adjust mode, press and hold the button

for 3 seconds.The hours will start flashing.

Select the hour using the and buttons to move the hour up or

down. Press once and the minutes will start to flash.

In the same way as with the hours, use and to increase or

decrease the minutes to select the correct time.

Once the minutes are correct press again so that the day flashes.

This represents Monday. With the button we can advance through

to day 2 (Tuesday), day 3 (Wednesday), etc. until we reach the required

day. Press again to confirm the day and to leave the time and date

adjust mode.

1.4. Locking the Control Panel

By pressing the keys and at the same time for 3 seconds, we

lock the control panel. The control panel symbol is activated and

the keys will not respond when pressed. If one key is pressed this

image will appear in the screen of the towel rail:

To unlock, press the and keys again, at the same time for 3

seconds.

1.5. Temperature Selection

By pressing or we change the temperature. When the room

temperature is lower than the set temperature, the electric towel rail

will begin to generate heat and the symbol will appear.

1.6. Manual / Automatic Mode

By pressing we change between the Manual and Automatic mode.

When the manual mode is selected, the symbol appears on the

display. When the automatic mode is selected, the symbol appears

on the display.

1.6.1. Manual Mode

This enables you to choose between the CONFORT, ECO and

ANTI-FROST modes of operation, changing the temperature as

indicated in Section 1.5.

ICON MODE TEMPERATURE RANGE

COMFORT 20ºC-30ºC

ECO 15ºC -19,5ºC

ANTI-FROST 8ºC

SYGMA

1.6.2. Automatic mode

This mode activates the programming set on the heated towel rail.

1.7. Two-hour Boost Mode (2H)

By pressing the key , the heated towel rail will work for two hours

at maximum power, regardless of any other mode. This mode takes

priority over any other.

When the heated towel rail is set on the two-hour mode, the screen

will show this image: for a few seconds.

Once the towel rail is set on the two-hour mode, and until the two

hours have finished or the key is pressed again, the display will

show this image:

1.8. “Open Window” function

This function is activated when the sensor detects a reduction of 4ºC

in respect of the set temperature during 30 minutes.

On activation, the following image will appear on the towel rail display

for 5 seconds:

When the “Open Window” function is activated, the following screen

will appear showing that the anti-frost mode is activated:

This function will be active for 2 hours. If the button is pushed

during this period the towel rail will switch off. Pushing the button

again will switch on the towel rail without the “Open Window”

function being switched on.

1.9. Screen brightness function

You can change the brightness of the screen by pushing the button

for 3 seconds when the product is in manual mode. Entering this

mode you will see the following screen:

In ON mode you can increase or decrease the brightness of the

screen by using the and buttons.

SYGMA

You can change the “Standby” mode brightness by pushing the button

to move the frame to the “STAND-BY” position. You can then adjust the

brightness by pushing the same and keys.

To finish the programming wait for 10 seconds without pressing any

buttons.

2. PROGRAMMING THE SYGMA TOWEL RAIL

IMPORTANT NOTICE: PLEASE READ THE INSTRUCTIONS FULLY

BEFORE STARTING THE PROGRAMMING TO ENSURE A GOOD

UNDERSTANDING OF THE PROCESS.

It is possible to programme the towel rail using the control panel.

In order to start the programming please ensure that the screen

shows automatic mode with the symbol .

If the screen shows an symbol, please press the button to

change modes.

By pressing and holding for 3 seconds the button we enter

programming mode.

The first thing you will see is the sun symbol flashing, representing

the comfort mode. The comfort mode temperature will also be

displayed.

Using the and buttons we can increase and decrease the

temperature desired within the comfort mode, from 20ºC to 30ºC.

This temperature will be applied later when programming an hour with

the comfort mode setting.

Once the comfort mode temperature is selected, press the button

so that the moon symbol appears flashing. This symbol represents

the economy (eco) mode. The economy mode temperature will also

be displayed.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Calentador de Rointe

Rointe

Rointe KYROS KTI030SE 3 Series Manual de usuario

Rointe

Rointe SYGMA BAS SRF1100RADC2 Manual de usuario

Rointe

Rointe Giza PRO 400 Manual de usuario

Rointe

Rointe Kyros Manual de usuario

Rointe

Rointe TN030SEB Manual de usuario

Rointe

Rointe ecodeisgn SYGMA SRF0500RAD2 Manual de usuario

Rointe

Rointe Torino electric OVAL 500 Manual de usuario

Rointe

Rointe KYROS KRI0330RAD3 Manual de usuario

Rointe

Rointe Palaos 1000RAD Hoja de datos

Rointe

Rointe Belize 1100RADC Manual de usuario

Rointe

Rointe Elba OVAL 400 Manual de usuario

Rointe

Rointe K series Manual de usuario

Rointe

Rointe ecodeisgn KYROS 0330RAD3 Manual de usuario

Rointe

Rointe Belize 0330RAD Manual de usuario

Rointe

Rointe Kyros Manual de usuario

Rointe

Rointe Kyros Manual de usuario

Rointe

Rointe Lyon electric pro Manual de usuario

Rointe

Rointe Napoli aqua Manual de usuario

Rointe

Rointe ecodesign D Series Manual de usuario

Rointe

Rointe Kyros Instrucciones de funcionamiento

Rointe

Rointe SYGMA Manual de usuario

Rointe

Rointe Elba PRO 400 Manual de usuario

Rointe

Rointe Loira electric OVAL 432 Manual de usuario

Rointe

Rointe ecodesign BELIZE Manual de usuario

Manuales populares de Calentador de otras marcas

oventrop

oventrop Regucor Series Manual de usuario

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manual de usuario

ELMEKO

ELMEKO ML 150 Manual de usuario

BN Thermic

BN Thermic 830T Manual de usuario

KING

KING K Series Guía

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guía de inicio rápido

Well Straler

Well Straler RC-16B Manual de usuario

EUROM

EUROM 333299 Manual de usuario

Heylo

Heylo K 170 Manual de usuario

Eterna

Eterna TR70W Manual de usuario

Clarke

Clarke GRH15 Manual de instrucciones

IRSAP

IRSAP The Radiator Company Ovali Manual de usuario

Empire Heating Systems

Empire Heating Systems WCC65 Manual de usuario

Wetekom

Wetekom 92 86 43 Manual de usuario

Desa

Desa SPC170-F Manual de usuario

Watlow

Watlow Watrod Electric Tubular Heaters Manual de usuario

Haverland

Haverland ECO-DRY GPS Series Manual de lista de piezas

Stelpro

Stelpro ASILVC2060 Series Manual de usuario