Robertshaw RS8210 Manual de usuario

R S 8210

Operation Manual

Caution

RS8210

Table of Contents 1

Thermostat Operation 2-3

Thermostat Quick Reference 4-6

Programming 7

Installer Setup Menu 8-10

Terminal Designations 11

DO NOT SWITCH SYSTEM TO

COOL IF THE TEMPERATURE

IS BELOW 50°F (10°C). THIS

CAN DAMAGE THE AIR

CONDITIONING SYSTEM AND

CAUSE PERSONAL INJURY.

Table of Contents Page

LCD Screen

Fan Switch

System Switch

Temperature Set-Point Buttons

User Buttons

THERMOSTAT OPERATION

Mon

Room

Set At

SLEEP

FAN

ON AUTO

HEAT

COOL

OFF

EMH

THERMOSTAT OPERATION

LCD Screen

See page 4 for details about this

display read out.

Fan Switch

Select ON or AUTO. ON will

runthe fan continuously.

AUTOwill cycle the fan on only

when the heating or cooling

system is running.

System Switch

Selects the HEAT or COOL for

your HVAC system. Selecting

HEAT turns on the heat mode.

Selecting COOL turns on the

cool mode. Selecting OFF turns

both heating and cooling off.

Selecting EMH (for heat pumps

with auxiliary heat) will lockout

the compressor and control

emergency/auxiliary heat.

Temperature Set-Point

Buttons

Press the or to select

the desired temperature.

Use these buttons to set up

programming options.

User Buttons

Set At

Low Battery

Indicator:

Replace batteries

when indicator is

shown.

System Operation

Indicators:

The , or

icon will display

when the COOL,

HEAT, or (FAN)

is on.

Hold: Is displayed

when thermostat

program is

overridden.

NOTE: If these icons

are ashing, there is

a 5-minute delay for

compressor protection.

Days of the week

and time.

Displays the user

selectable set-point

temperature.

This thermostat has 4

programmable time periods per

day.

Indicates the current

room temperature.

Tech Set

Next Step

Set Time

Run Sched

Hold Filter

Done WAKE LEAVE RETURN SLEEP

Set Sched

Hold

Prev Step

Button Options

Programmable Time Periods:

Min Com On

Com Delay He at

Cool Swing

Room

Sun Mon Tue Wed Thu Fri Sat

Set At

+1 +2

THERMOSTAT QUICK REFERENCE

Battery Door Information

THERMOSTAT QUICK REFERENCE

Install two

AAA Alkaline

batteries

into battery

compartment.

Be sure to

match positive (+) ends of batteries with positive (+)

battery terminals in the battery compartment.

Press the lower portion of

the thermostat to open the

easy access battery door.

When the battery icon appears, replace the alkaline AAA batteries

immediately to avoid damage to your HVAC system. Freezing or

overheating could occur

Caution:

Filter Change Reminder

The thermostat can be congured to remind you when the air lter needs to

be changed. The lter change reminder can be adjusted to up to 2000 hours

in 50 hour increments.

If the installer congured the thermostat to issue this reminder, FILTER will be

displayed when it is time to change the air lter. When FILTER is displayed,

you should change the air lter and reset the Filter Change Reminder by

holding down the second button from the top left side of the thermostat for

3 seconds.

Hold down button for

3 seconds to reset

lter reminder.

Mon

Room

Set At

SLEEP

FAN

ON AUTO

OFF HEAT

EHM

COOL

THERMOSTAT QUICK REFERENCE

Set Time

Set temperature

1. Press the MENU button.

2. Press SET TIME.

3. Day of the week will be ashing. Use or to select the

current day of the week.

4. Press NEXT STEP.

5. The current hour will be ashing. Use or to select the

current hour. Note the correct a.m. or p.m. indicator is selected.

6. Press NEXT STEP.

7. The minutes will be ashing. Use or to select the

current minutes.

8. Press DONE when completed.

1. Use or to select set temperature.

PROGRAMMING

1. Press MENU.

2. Press and hold TECH SET for 3 seconds.

3. Congure the installer options as desired using the table below.

4. Use and to change settings and the NEW STEP or PREV STEP to

move from one option to another.

Note: Only press DONE when you want to exit the Installer Setup Options.

Feature Filter Change

Reminder

Room

Temperature

Calibration

Minimum

Compressor On

Time

Compressor

Short Cycle

Delay

Cooling

Differential

Heating

Differential

Adjustment

Options

The lter change

reminder can

be adjusted

from OFF to

2000 hours

in 50 hour

increments.

The room

temperature

display can

be adjusted

to read 3°

above or below

the factory

calibrated

temperature.

The minimum

compressor

run time can be

adjusted from

OFF to 3, 4, or 5

minutes. If 3, 4,

or 5 is selected,

the compressor

will run for at least

the selected time

before turning off

(although the fan

may continue to

run for a short time).

The

compressor

short cycle

delay setting

can be

removed by

selecting OFF.

The cooling

differential

setting is

adjustable from

0.2°F to 2°F

The heating

differential

setting is

adjustable from

0.2°F to 2°F.

INSTALLER SETUP MENU

Otros manuales para RS8210

Tabla de contenidos

Otros manuales de Termostato de Robertshaw

Robertshaw

Robertshaw 9615 Manual de usuario

Robertshaw

Robertshaw RS4110 Manual de usuario

Robertshaw

Robertshaw 9801I Manual de usuario

Robertshaw

Robertshaw 8601 Manual de usuario

Robertshaw

Robertshaw 9600 Manual de usuario

Robertshaw

Robertshaw 200-403 Manual de usuario

Robertshaw

Robertshaw 9415 Manual de usuario

Robertshaw

Robertshaw 9720 Manual de usuario

Robertshaw

Robertshaw 9615 Manual de usuario

Robertshaw

Robertshaw 8625 Manual de usuario

Robertshaw

Robertshaw 5300 Series Guía de instalación y uso

Robertshaw

Robertshaw RS3110 Manual de usuario

Robertshaw

Robertshaw 8425 Manual de usuario

Robertshaw

Robertshaw 9915i Manual de usuario

Robertshaw

Robertshaw 9700i Manual de usuario

Robertshaw

Robertshaw RS9210 Manual de usuario

Robertshaw

Robertshaw 9520 Manual de usuario

Robertshaw

Robertshaw Uni-Kit 4350 Series Guía de instalación y uso

Robertshaw

Robertshaw 9701i2 Manual de usuario

Robertshaw

Robertshaw RS4110 Manual de usuario

Robertshaw

Robertshaw 9801i2 Manual de usuario

Robertshaw

Robertshaw 8401 Manual de usuario

Robertshaw

Robertshaw 7610 Manual de usuario

Robertshaw

Robertshaw RS5110 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario