Robertshaw RS9210 Manual de usuario

RS9210

Operation Manual

Table of Contents 1

Thermostat Operation 2-3

Thermostat Quick Reference 4-7

Programming 8-10

Installer Setup Menu 11-15

Terminal Designations 16

DO NOT SWITCH SYSTEM TO COOL

IF THE TEMPERATURE IS BELOW

50°F (10°C). THIS CAN DAMAGE THE

AIR CONDITIONING SYSTEM AND

CAUSE PERSONAL INJURY.

Caution

RS9210

Table of Contents Page

THERMOSTAT OPERATION

LCD Screen Temperature Set-Point Buttons

User ButtonsFan Switch

System Switch

Mon

Room

Set At

SLEEP

FAN

ON AUTO

HEAT

COOL

OFF

EMH

THERMOSTAT OPERATION

LCD Screen

See page 4 for detailed information.

Fan Switch

Select ON or AUTO. ON will run

the fan continuously. AUTO will cycle

the fan on only when the heating or

cooling system is on.

System Switch

Selects HEAT or COOL for your

HVAC system. Selecting HEAT turns

on the heat mode. Selecting COOL

turns on the cool mode. Selecting OFF

turns both heating and cooling off.

Selecting EMH (for heat pumps

with auxiliary heat) will lockout the

compressor andcontrol emergency/

auxiliary heat.

Temperature Set-Point

Buttons

Press or to select the

desired temperature.

User Buttons

Use these buttons to set up

programming options.

Days of the week

and time.

Button Options

Programmable Time Periods:

This thermostat has 4 programmable time

periods per day.

Indicates the current room

temperature.

Displays the user selected

set-point temperature. Hold: Is displayed

when thermostat

program is overridden.

Low Battery

Indicator:

Replace batteries when

indicator is shown.

System Operation

Indicators:

The , or icon

will display when the

COOL, HEAT, or

(fan) is on.

NOTE: If these icons

are ashing, there is

a 5-minute delay for

compressor protection.

Tech Set

Next Step Min Com On

Com Delay Heat

Cool Swing

Room

Sun Mon Tue Wed Thu SatFri

Set Time

Run Sched

Set Sched

Hold

Prev Step

Done WAKE LEAVE RETURN SLEEP

Hold Filter

Set At

+1 +2

THERMOSTAT QUICK REFERENCE

Battery Door Information

Install two AAA

Alkaline batteries

into battery

compartment.

Be sure to match

positive (+) ends

of batteries with positive (+) battery

terminals in the battery compartment.

Press the lower portion of

the thermostat to open the

easy access battery door.

THERMOSTAT QUICK REFERENCE

Caution:

When the battery icon appears, replace the alkaline AAA batteries immediately to avoid

damage to your HVAC system. Freezing or overheating could occur.

Temperature Adjustment (if Using a Program Schedule)

Temporary Adjustment: You may temporarily change the desired temperature

set-point by pressing either or .

The temperature will remain at this set-point

until the next programmed WAKE, LEAVE, RETURN, or SLEEP event.

The program schedule will then resume.

Program Schedule Hold: The thermostat will display HOLD and RUN

SCHED on the left of the screen when you press either or . You may

hold the temperature at a xed temperature set-point and override the program

schedule by pressing HOLD. The thermostat will display HOLD below the

temperature set-point to notify you that the program schedule hold is in effect.

To Return to Programming: Press RUN SCHED to return to the

program schedule.

THERMOSTAT QUICK REFERENCE

Filter Change Reminder

The thermostat can be congured to remind you when the air lter needs to

be changed. The lter change reminder can be adjusted to up to 2000 hours in

50 hour increments.

If the installer congured the thermostat to issue this reminder, FILTER will be

displayed when it is time to change the air lter. When FILTER is displayed, you

should change the air lter and reset the Filter Change Reminder by holding down

the second button from the top left side of the thermostat for 3 seconds.

Hold down button for

3 seconds to reset lter

reminder.

Mon

Room

SLEEP

FAN

ON AUTO

OFF HEAT

EHM

COOL

Set At

THERMOSTAT QUICK REFERENCE

Set Time of Day and Day of Week

1. Press the MENU button.

2. Press SET TIME.

3. Day of the week will be ashing. Use or to select the current

day of the week.

4. Press NEXT STEP.

5. The current hour will be ashing. Use or to select the current hour.

Note the correct a.m. or p.m. indicator is selected.

6. Press NEXT STEP.

7. The minutes will be ashing. Use or to select the current minutes.

8. Press DONE when completed.

PROGRAMMING

Otros manuales para RS9210

Tabla de contenidos

Otros manuales de Termostato de Robertshaw

Robertshaw

Robertshaw 9505 Manual de usuario

Robertshaw

Robertshaw RS311N Manual del propietario

Robertshaw

Robertshaw 9915i Manual de usuario

Robertshaw

Robertshaw RS9220 Manual de usuario

Robertshaw

Robertshaw DSL-520P Manual

Robertshaw

Robertshaw 9610 Manual de usuario

Robertshaw

Robertshaw RS8210 Manual de usuario

Robertshaw

Robertshaw RS2210 Series Manual de usuario

Robertshaw

Robertshaw RS4220C Manual de usuario

Robertshaw

Robertshaw 8625 Manual de usuario

Robertshaw

Robertshaw RS4000C Series Manual de usuario

Robertshaw

Robertshaw RS2110C Series Manual de usuario

Robertshaw

Robertshaw 9405 Manual de usuario

Robertshaw

Robertshaw 9700i Manual de usuario

Robertshaw

Robertshaw RS321P Manual de usuario

Robertshaw

Robertshaw 8400 Manual de usuario

Robertshaw

Robertshaw RS9110 Manual de usuario

Robertshaw

Robertshaw 9801I Manual de usuario

Robertshaw

Robertshaw RS4110 Manual de usuario

Robertshaw

Robertshaw RS9110 Manual de usuario

Robertshaw

Robertshaw 9400 Manual de usuario

Robertshaw

Robertshaw 9615 Manual de usuario

Robertshaw

Robertshaw Smart Sense SMART 1000 Manual de usuario

Robertshaw

Robertshaw RS4220C Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario