Riva RC3302HD-5344 Manual de usuario

www.rivatech.de

Quick Installation Guide

This manual provides instructions for quick installation and basic configuration of your IP device.

www.rivatech.de

Step1. Connect cables to IP device

Connect required cables to the device including the power cable, LAN cable, and other

optional cables. To see the correct positions of all connectors, refer to the following image

below.

The device is polarity sensitive. Incorrect power

connection may cause malfunction or damage to

the IP device.

Caution

Power Adaptor Connector (DC

12V)

* Models herein and their appearance are subject to change without any prior notice.

LAN Cable

Reset Button

Pan/Tilt and Lens

control buttons

Power

Cable

PAL, NTSC

button

ETHERNET AC24V

DC12V

USB

DO DI

Out In

AUDIO

C1 1

Pressing the button cycles

through PAL, NTSC, and no

video output mode:

No video

output -> PAL->NTSC

.Video

out is used only for installation

and works for 3 minutes when

PAL/NTSC button is pushed.

www.rivatech.de

Step2. Install IP device

1) Place the installation template

that is provided in the package on

the desired position of installation.

2) Drill four holes on the template

and insert anchor blocks into the

holes. Fasten the camera with

screws.

3) Insert the camera body to the

installation surface and match three

alignment holes with three anchor

blocks.

4) Tighten the surface anchor studs.

5) Make sure the cables are properly

connected.

6) Adjust the lens position by

referring to the Step 3.

7) Put the dome cover on the main

body of the camera. Make sure the

main body and the cover fit each

other into place.

8) Fasten the cover with screws.

When assembling the main body of the camera and its dome cover,

make sure they fit each other into place.

The camera may fall off the ceiling even after the proper installation and

mounting. To prevent any accident, make sure the ceiling is firm and

stable enough to support the camera. If any reinforcement is needed,

consult with your safety personnel and proceed with the installation.

Caution

www.rivatech.de

Step3. Set the lens position

1) Remove the dome cover.

2) Pan and tilt the lens to the desired position by pressing buttons on the body in the

following directions. Rotate the lens by moving after loose screw behind the lens as

marked below and fasten the screw after finish the rotation.

Connect to the web page of the device to see its real-time image. Refer to

step

Setting IP address

for details about using its web page.

B. Pan the lens bottom

holder

C. Tilt the lens

A. Rotate the lens

Rotation

Screw

When installing the camera, it is

important to pay careful attention to the

orientation of the camera housing.

Although the camera can pan almost

360 degrees, best performance will be

achieved if the housing is oriented

properly such that the lens is facing the

scene. Please refer to the diagram

www.rivatech.de

Step4. Set up network environment

The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of

the device from converting the MAC address’s hexadecimal numbers, which is attached to the

device. Be sure that the device and PC are on a same area network before running the

installation.

Generic IP Environment

In case of generic private network environment where IP address 192.168.XXX.XXX are

used, users may view the live streaming images on a web page using the device’s default IP

address:

1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal

Conversion Chart at the end of the manual.

(The MAC address of the device is attached on the side or bottom of the device.)

2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.

3. Web streaming and device configurations are supported through ActiveX program. When

the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe.

Custom IP Environment

IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de

homepage.

MAC address = 00-13-23-01-14-B1 →IP address = 192.168.20.177

Convert the last two set of hexadecimal numbers to decimal numbers.

www.rivatech.de

IPAdminTool is a management tool, which automatically scans all of the network products for

users to perform administrative tasks, which includes network configurations, firmware update,

device reboot, and device organizations.

To modify the device’s default IP address for customized network area;

1. Find the device from the IPAdminTool’s list and highlight the device’s name.

2. Right-click the mouse and select “IP Address”; IP Setup window appears.

PC environment Info

Give new unique IP address in

last two sets and mirror other

information in other boxes

www.rivatech.de

3. In the IP Setup’s window, information under ‘Local Network information’ displays the

user/PC’s network area information. Those information need to be incorporated to the

IP Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP

Address, which are to be the unique numbers for the device. Refer to the image above

for the setting

4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user

name and password, enter the default value for the administrator account (case-

sensitive) as below:

ID:

root

Password:

pass

Step5. View video on web page

Once the device has the proper IP address, users can view the live streaming images

through a web browser.

The default username and password is

root / pass

1. When the device’s web address is accessed, the browser asks to install the ActiveX.

Click Allow.

www.rivatech.de

Caution

2. Setup.exe installation link or pop-up window appears, depends on Microsoft® Internet

Explorer version. Proceed with rest of setup installation.

3. Follow the instructions of the dialog boxes and complete the installation. Once the

installation is complete, start the web browser again and check if video stream is

displayed in the main view frame.

If “

This software requires the Microsoft XML Parser V6 or higher.

Please download MSXML6 from the Microsoft website to continue.

Error code: Cannot create XMLDOMDocument.

” message appears,

download and install the Microsoft Core XML Services (MSXML)

6.0.

www.rivatech.de

Rebooting

Perform the following procedures to reset your device:

1. While the device is on, press the reset button for 1~2 seconds.

2. Wait for the system to reboot.

Resetting to the Factory Default Settings

When reset the device to the factory default setting, all parameters including the IP address

will be initialized.

To proceed back to the Factory Default reset:

1. While the device is on, press reset button and hold.

2. Release the Reset button after about 5 seconds when green LED blinks at rate of 200ms.

3. Wait for the system to reboot.

More Information

To learn more about using other features of your devices, refer to the manuals as “Web

Interface Manual” or “VCAsys _Online_Help”, which is available on USB stick or on

www.rivatech.de homepage.

www.rivatech.de

Hexadecimal-Decimal Conversion Table

Refer to the following table when you convert the MAC address of your device to IP address.

Hex

Dec

Hex

Dec

Hex

Dec

100

101

102

103

104

105

106

107

108

109

110

Hex

Dec

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

Hex

Dec

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

Hex

Dec

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

Hex

Dec

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

Otros manuales para RC3302HD-5344

Tabla de contenidos

Otros manuales de Cámara de seguridad de Riva

Riva

Riva RC5510 Manual de usuario

Riva

Riva RC3502HD-5211 Manual de usuario

Riva

Riva RC302HD-5117 Manual de usuario

Riva

Riva RC4602SV01-2017-A Manual de usuario

Riva

Riva RC3402HD-6311IR Manual de usuario

Riva

Riva RC362HD Manual de usuario

Riva

Riva RC3402HD-6211R Manual de usuario

Riva

Riva RC302SV-5117 Manual de usuario

Riva

Riva RC3202HD-6111 Manual de usuario

Riva

Riva RC6802HD-6217 Manual de usuario

Riva

Riva RC6602HD-5311 Manual de usuario

Riva

Riva RC3502HD-5211IR Manual de usuario

Riva

Riva RC4100-IN Manual de usuario

Riva

Riva RC3402HD-6211IR Manual de usuario

Riva

Riva RC4602HD-6416 Manual de usuario

Riva

Riva RC3500M Manual de usuario

Riva

Riva RC4602SV-7416A-30 Manual de usuario

Riva

Riva RC6702HD-6211 Manual de usuario

Riva

Riva RC3102HD-5311 Manual de usuario

Riva

Riva RC6702SV-7311 Manual de usuario

Riva

Riva RC3102HD-5211 Manual de usuario

Riva

Riva RC3202HD-6111 Manual de usuario

Riva

Riva RC100 Manual de usuario

Riva

Riva RC5502HD-6415-05 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario