Ricoh M018 Manual
1
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 1
Service Training
M018/M019
Product Overview
PE-MF2b/PE-MF2c
Version 1.0
This training course explains the differences between the PE-MF2 series and
the older PE-MF1 series.
2
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 2
What Models are there in the Series?
PE-MF2b (M018)
20 ppm (color and b/w)
No optional memory
DDST (GDI)
Duplex built-in
Fax built-in
Optional 500-sheet paper tray
PE-MF2c (M019)
20 ppm (color and b/w)
Optional 256MB memory available
PCL/PS
Duplex built-in
Fax built-in
Optional 500-sheet paper tray
No additional notes
3
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 3
Appearance
These machines have a built-in ADF.
4
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 4
Product Positioning
PE-MF2 is the successor model to PE-MF1.
Model PE-MF1 b and c were enhanced and will be launched as PE-MF2b
and PE-MF2c.
PE-MF1a will continue to be sold as the cheapest A4 LP-based MF in the
company’s line-up, and selling for this product will be focused in low
H/W price oriented channels.
It is intended to sell PE-MF1a as long as possible, but it will be
necessary to review the balance between marketability and profitability,
because competition in this segment is expected to increase.
PL-MF1
31/8ppm
3-in-one
4-in-one
GDI
GDI
PE-MF1b
21/21ppm
PE-MF1c
21/21ppm
PE-MF1a
16.5/16.5ppm
GDI
PCL/PS
4-in-one
4-in-one
PE-MF2b
21/21ppm
PE-MF2c
21/21ppm
GDI
PCL/PS
4-in-one
4-in-one
2006 2007 2008
3-in-one: Copier, Printer, Scanner
4-in-one: Copier, Printer, Scanner, Fax
5
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 5
Operation Panel
There is a User Tools button to make initial setup easier.
Service mode is the same as the PE-MF1. It is not necessary to use a PC,
like it was for the PE-P1.
6
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 6
Uses an AIO Cartridge
The OPC, charge roller, and development unit are all in an AIO
cartridge.
AIO: All-in-one
The cartridge can be removed with one hand.
The AIO cartridge for the PE-MF2 is different from the AIO
cartridge for the PE-MF1.
It is the same as the AIO cartridge that is used with the MD-P1.
No additional notes
7
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 7
Two Types of AIO (Print) Cartridge
Starter
1 k prints per cartridge
Short Yield
2.5 k prints per cartridge
Long (High Yield)
6.5 k prints per cartridge (BK)
6.0 k prints per cartridge (CMY)
» Method was changed: From 5% chart & 50% color to
ISO19798
» Yield based on ISO 19798 (ISO chart, continuous prints)
Waste Toner Tank
Approximately 25 k prints per tank
No additional notes
8
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 8
Standard Equipment
This equipment is built-in for both models.
35-sheet automatic document feeder
250-sheet paper feed unit
1-sheet bypass feed
Duplex (for printing and copying)
» PE-MF1: Duplex is for printing only
Ethernet: 10Base-T/100base-TX
USB 2.0
Fax
Memory
RAM: 128 MB (Main board: PE-MF2b & PE-MF2c)
» PE-MF2c also has 128MB on its PDL board (built-in), with an empty
slot which can be upgraded with an optional 256MB board, for a
maximum of 384MB on the PDL board (in addition to the main board's
128MB)
– Note: As the memory for the main board and the memory for the
PDL board serve different functions, the 128MB of the Main Board
and the maximum of 384MB on the PDL board should not be
thought of as additive for a total of 512MB.
No hard disk (built-in or optional) for either model
Memory
¾PE-MF2b (GDI model): The memory on the main board is used for
printing.
¾PE-MF2c (PDL/PS model): The memory on the PDL board is used for
printing. Raster data in the memory on the PDL board is sent to the
memory on the main board. However, the memory on the main board is
not used for printing processing; it is only a temporary holding area. So
the 128 MB on the main board cannot be included in the total printer
memory spec.
9
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 9
Optional Equipment
Memory Unit Type F 256MB, G891 (PE-MF2c only)
TK1010 Paper Feed Unit, G849 (PE-MF2b and PE-
MF2c)
Both of these are also used in the PE-MF1.
No additional notes
10
RicohCo.Ltd.http://www.ricoh.com/
M018/M019
PE-MF2b/PE-MF2c
Slide 10
Improvements to Basic Features
Faster warm-up time
Improved from 51 s to 48 s
Higher yield for the AIO Cartridge
Improved from 2k to 6.5k (black) and 6k (CMY)
Improved copying functions
“Duplex Copy”, for example.
In the PE-MF1, duplex printing is available but not duplex copying.
PC-Fax is added
Improvement of “Dual Access Capability”
This means that there are more cases in which the machine can
do two jobs at the same time (for example, scanning and printing a
fax at the same time).
Additional security features, such as “Locked Print” and “User
Restriction”.
Improved operation panel
A User Tools key was added.
No additional notes
Otros manuales para M018
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios de impresora de Ricoh
Ricoh
Ricoh Container Stacker Manual
Ricoh
Ricoh LCIT RT3030 Guía de inicio rápido
Ricoh
Ricoh Aficio 3030 Manual de usuario
Ricoh
Ricoh 3800C Series Manual de usuario
Ricoh
Ricoh SR3130 Guía de inicio rápido
Ricoh
Ricoh Aficio SG 3110DN Manual de usuario
Ricoh
Ricoh 3532 Manual de usuario
Ricoh
Ricoh PB2030 Guía de inicio rápido
Ricoh
Ricoh DU5040 Guía de inicio rápido
Ricoh
Ricoh TK2000 Manual de usuario
Ricoh
Ricoh 3800C Series Manual de usuario
Ricoh
Ricoh PJ WXC1210 Manual de usuario
Ricoh
Ricoh Aficio SG 3110DN Manual de usuario
Ricoh
Ricoh D699 Guía de inicio rápido
Ricoh
Ricoh GR III Manual de usuario
Ricoh
Ricoh A-P3 Manual de usuario
Ricoh
Ricoh DF56 Manual de usuario
Ricoh
Ricoh D109 Manual
Ricoh
Ricoh PB1080 Guía de inicio rápido
Ricoh
Ricoh 140F Manual de usuario
