Ricoh LCIT RT5060 Manual de servicio
Technical Bulletin PAGE: 1/1
Model: LCIT RT5060 (D516) Date: 20-Jun-11 No.: RD516001
Subject: Firmware Release Note: LCIT RT5060 Prepared by: K.Tsutsui
From: PPBG Service Planning Dept.
Classification: Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other (Firmware) Tier 2
This RTB has been issued to announce the firmware release information for the LCIT.
Version Program No. Effective Date Availability of RFU
01.030:04 D5165510B 1st Mass production Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version Modified Points or Symptom Corrected
01.030:04 1st Mass production
Technical Bulletin PAGE: 1/2
Model: Aegis-C1 (D016) Date: 23-Jan-12 No.: RD016018
Subject: Part Changes; Handle assembly and Shoe Prepared by: A. Takada
From: PP Tech Service Dept., 1st PP Tech Service Sect.
Classification: Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Change: Shape of the Handle assembly and Shoe
Reason: To enable usage of common parts with different products
Changed parts
A：Shoe: Handle: Release
Shape of the Shoe was partially modified.
B：Handle: Ass’y
Handle was also modified in accordance with the shape change of the Shoe.
(Shape of the plate was also modified.)
Technical Bulletin PAGE: 2/2
Model: Aegis-C1 (D016) Date: 23-Jan-12 No.: RD016018
Model
：
Aegis-C1 (D016)
Old Part
Number New Part
Number Description Q’ty Int Page Index Note
D3553566 D3553567 Handle:Ass’y 2 X/O 287 11 -
- D5163847 Shoe:Handle:Release 4 287 17 -
・ If the unit is now installed with D3553566, replace with D3553567. D5163847 is not
needed.
・ D5163847 can be attached ONLY to D3553567.
・ The modification described in this bulletin also applies to Aries C-1.5 (D095), LCT
RT5020 (D355), LCIT RT5050 (D532), and LCIT RT5060 (D516).
Technical Bulletin PAGE: 1/1
Model: Taurus-C1/P1 (D074/D075/M044) Date: 15-Feb-12 No.: RD516002
Subject: Parts Number Information (Tray Heater for
Taurus-C1/P1 LCIT RT5060) Prepared by: T. Komori
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification: Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
The tray heater kit has been registered with the following part number.
This tray heater can be used in both 230V and 120V areas.
D4530900 (HEATER:DEHUMIDIFIER:230V:KIT)
For the installation procedure, refer to the following section of the Field Service Manual:
2. Installation > A3/DLT LCIT > LCIT (D516) Tray Heaters
Technical Bulletin PAGE: 1/1
Model: Large Capacity Tray RT5060 (D516) Date: 26-Mar-12 No.: RD516003
Subject: Part Changes (Slide Rails) Prepared by: S. Sasaki
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Classification: Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Please apply the following part number modifications to your Large Capacity Tray RT5060
(D516) parts catalog.
Main Frame (D516)
Details
The part numbers of the rails for the 1k trays (Trays 3 and 5) have changed. Part number
of the rails for the 2k tray (Tray 4) remains the same.
Note
Rails for both sides of the tray must be replaced as a set. Replace [A] & [B] as a set, and
[C] & [D] as a set.
Old Part
Number New Part
Number Description Q’ty Int Page Index Note
D5161145 D5161125 SLIDE RAIL:LEFT:1K:ASS'Y 2 -
D5161155 D5161135 SLIDE RAIL:RIGHT:1K:ASS'Y 2
O /O
As a
set -
[A] [B]
[C] [D]
T
echnical
B
ulletin PAGE: 1/5
Model:
Large Capacity Tray RT5060 (D516)
Date:
22-May-2012
No.:
RD516004
Subject:
Post card fence attachment procedure
Prepared by:
K. Tsutsui
From:
1st PP Tech Service Section, PP Tech Service Dep.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
General
Procedure for installing the auxiliary “post card” fences onto the A3/DLT LCIT (RT5060) –
for feeding short edge paper stocks such as post cards– is missing in the current Taurus
Users Manual.
If installation of the post card fences is requested by the customer, please provide
instructions on how to install/remove the post card fences by referring to the procedure in
this bulletin.
Procedure: Installing the auxiliary “post card” fences in the LCIT (RT5060)
1. Open the front door.
T
echnical
B
ulletin PAGE: 2/5
Model:
Large Capacity Tray RT5060 (D516)
Date:
22-May-2012
No.:
RD516004
2. Pull to remove the snap-fit retainer ring.
3. Lift up to clear the auxiliary post card fences from the 2 shafts.
Remove the fences
(
x4
)
one at a time.
4. Unscrew to remove the green knob screws (x4).
T
echnical
B
ulletin PAGE: 3/5
Model:
Large Capacity Tray RT5060 (D516)
Date:
22-May-2012
No.:
RD516004
5. Check that the removed parts are as shown below.
6. Apply the short fences for Trays 3 or 5, and the long fences for Tray 4.
Attachment procedures are identical for all trays. The fences are attached to
Tra
y
3 in the followin
g
procedure.
Tray 3 (1,000 sheets)
Tray 4 (2,000 sheets)
Tray 5 (1,000 sheets)
Post card fence -REAR
Post card fence -FRONT
Distinguish the fences
by locating the
cushion piece which
is attached only on
the REAR fence.
T
echnical
B
ulletin PAGE: 4/5
Model:
Large Capacity Tray RT5060 (D516)
Date:
22-May-2012
No.:
RD516004
7. Attach the U-shaped hook to the bolt located at the bottom of the side plate (rear).
8. Fix the post card fence by aligning the boss and screwing the green knob screw.
Align the hole on the fence with the boss on the side plate.
T
echnical
B
ulletin PAGE: 5/5
Model:
Large Capacity Tray RT5060 (D516)
Date:
22-May-2012
No.:
RD516004
9. Check that the post card fence is installed as shown in the photos below.
NOTE: To remove the post card fences, follow the above steps in the reverse order.
Install the opposing fence (front) similarly.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de impresora de Ricoh
Ricoh
Ricoh Scan CX v1 Manual de servicio
Ricoh
Ricoh TK1090 Guía de inicio rápido
Ricoh
Ricoh Aficio 1018 Manual de usuario
Ricoh
Ricoh D392 Guía de instalación
Ricoh
Ricoh Aficio CL3000 Manual de usuario
Ricoh
Ricoh 3800C Series Manual de usuario
Ricoh
Ricoh Aficio 3030 Manual de usuario
Ricoh
Ricoh InfoPrint 75 Manual de usuario
Ricoh
Ricoh ADF DF7010 Guía de inicio rápido
Ricoh
Ricoh D109 Manual
Ricoh
Ricoh Aficio AP4510 Manual de lista de piezas
Ricoh
Ricoh M018 Manual
Ricoh
Ricoh Aficio AP400 Manual de usuario
Ricoh
Ricoh Aficio SG 3110DN Manual de usuario
Ricoh
Ricoh M15 Guía de inicio rápido
Ricoh
Ricoh CH-C1 Manual de servicio
Ricoh
Ricoh D014 Manual de usuario
Ricoh
Ricoh Container Stacker Manual
Ricoh
Ricoh D1 Manual de usuario
Ricoh
Ricoh Priport DX 4640PD Manual de usuario
