REED R6001 Manual de usuario

www.REEDINSTRUMENTS.com

Thermo-

Hygrometer

Instruction

Manual

R6001

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

Table of Contents

Introduction ................................................................................................ 2

Product Quality........................................................................................... 3

Safety ......................................................................................................... 3

Features...................................................................................................... 3

Specications..........................................................................................3-4

Included...................................................................................................... 4

Instrument Description ............................................................................... 4

Display Description .................................................................................... 5

Operating Instructions.............................................................................5-7

Unit of Measure Selection (Temperature)............................................... 5

Data Hold ............................................................................................... 5

Relative Function ................................................................................... 5

MAX/MIN Function ................................................................................ 6

Auto Power Off ...................................................................................... 6

Humidity Calibration Procedure..........................................................6-7

Restoring Factory Settings .................................................................... 7

Battery Replacement.................................................................................. 7

Accessories and Replacement Parts ......................................................... 7

Applications................................................................................................ 8

Product Care .............................................................................................. 8

Product Warranty ....................................................................................... 8

Product Disposal and Recycling ................................................................ 9

Product Support......................................................................................... 9

Introduction

Thank you for purchasing your R6001 Thermo-Hygrometer. Please read the

following instructions carefully before using your instrument. By following the

steps outlined in this manual your meter will provide years of reliable service.

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

Product Quality

This product has been manufactured in an ISO9001 facility and has been

calibrated during the manufacturing process to meet stated product

specications. If a certicate of calibration is required please contact the

nearest authorized REED distributor or authorized Service Center. Please

note an additional fee for this service will apply.

Safety

Never attempt to repair or modify your instrument. Dismantling your

product, other than for the purpose of replacing batteries, may cause

damage that will not be covered under the manufacturer's warranty.

Servicing should only be provided by an authorized service center.

Features

• Easy-to-use,intuitivedesign

• DualLCDreadoutdisplaystemperatureandhumidity

• Userselectable°F/°C

• HighSamplingRateof2.5times/sec

• Datahold,Min/MaxandRelativefunctions

• Lowbatteryindicatorandautoshut-off

Specifications

Temperature

MeasuringRange: -4to140°F(-20to60°C)

Accuracy: ±1.6°F(0.8°C)

Resolution: 0.1°F/°C

Humidity

MeasuringRange: 0to100%RH

Accuracy: ±3%RH

Resolution: 0.1%RH

General Speciﬁcations

Display: DualDisplay,LCD

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

DataHold: Yes

Min: Yes

Max: Yes

RelativeFunction: Yes

SamplingRate: 2.5times/sec.

AutoShut-off: Yes(30mins/off)

LowBatteryIndicator: Yes

PowerSupply: 9Vbattery

ProductCertications: CE

OperatingTemperature: -4to140°F(-20to60°C)

StorageTemperature: 14to140°F(-10to60°C)

OperatingHumidityRange: 10to80%

Dimensions: 9.5x2.1x1.3"(240x54x34mm)

Weight: 6.4oz(180g)

Included

• CarryingCase

• Battery

Instrument Description

1. Sensor Protective Cap

2. LCDDisplay

3. Power Button

4. MAX/MINButton

5. Data Hold Button

6. Relative Function Button

7. UnitofMeasureButton

8. Battery Cover

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

Display Description

Data Hold Indicator Relative Indicator

Humidity Measurement

Temperature Display

Unit Indicator

Minimum Indicator

Maximum Indicator

Low Battery Indicator

Auto Power Off Indicator

Indication de la fonction de

conservation de la lecture

Indication de l'unité de mesure

Indication de la valeur de lecture minimum

Indication de pile faible

Indication du mode d'arrêt automatique

Indication de la valeur de lecture maximum

Indication du mode de relativisation

Mesure d'humidit

Operating Instructions

PresstheON/OFFbuttontoturnthemeterONorOFF.

Unit of Measure Selection (Temperature)

When the meter is powered on press the °C/°F button to toggle between

Celsius and Fahrenheit.

Note:ThedefaultunitofmeasureisCelsius(°C).Themeterwillautomati-

cally save the last selected unit of measure when turned off.

Data Hold

Press the HOLD button to freeze the current reading on the display. Press

the button again to resume normal operation.

Note:WhentheDataHoldfunctionisenabledtheREL,MAX/MIN,and

°C/°Fbuttonsaredisabled.

Relative Function

Press the REL button to store the current measurement. The meter will

display the difference between any new measurement and the stored

measurement. Press the RELbuttonagaintoexitRelativeFunction

mode and resume normal operation.

continued...

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

MAX/MIN Function

Press the MAX/MINbuttontoaccessMaximumandMinimummodes.

2. When pressing the MAX/MINbuttononce,theMAXIndicatorwill

appearonthedisplay.Themaximumtemperatureandmaximum

humidity values are displayed and will automatically update when

newmaximumdatavaluesaremeasured.

3. Press the MAX/MINbuttonagainandtheMINindicatorappearson

the display. The minimum temperature and minimum humidity values

are displayed and will automatically update when new minimum data

values are measured.

4. Press the MAX/MINbuttonathirdtimeandboththeMAXandMIN

indicatorswillblinkcontinuously.TheMaximum&Minimumvalues

willautomaticallyupdateintheMax/Minmemorywhilethecurrent

temperature and humidity measurements are displayed. To view

theMax/MinmeasurementsduringthismodepresstheMAX/MIN

button at any time to toggle through stored measurements.

5. ToexitMAX/MINmodeandresumenormaloperation,pressandhold

the MAX/MIN button for two seconds.

Note:WheninMAX/MINmode,theRELand°C/°Fbuttonsaredisabled.

Auto Power Off

To preserve battery life, the meter is programmed to turn itself off after

30 minutes of inactivity. To disable this feature, press and hold the HOLD

button while powering on the meter. When the meter turns on, release both

buttons simultaneously. The Auto Power Off indicator will not appear on

the display, conrming this feature is now disabled. If the meter is turned

offthenbackon,the"AutoPowerOff"featurewillbeenabledagain.

Humidity Calibration Procedure

In order to calibrate the meter humidity calibration standards are required

(REEDR9933,R9975orR9980).Ifthemeterhasbeenexposedto

extremeconditionsorithasnotbeenusedinalongperiodoftimethe

meter should be calibrated by following steps 1 through 6 below.

1. Turn the meter off.

PresstheHOLD,°C/°F,andpowerbuttonssimultaneouslyandrelease.

continued...

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

3. WhentheLCDashes,pressthe REL button to enter calibration

mode.Thiswillbeindicatedby"CAL1"ontheLCD.

Insertthetipofthemeterintothe33%RHHumidityCalibrationStandard

(REEDR9933)thenpresstheMAX/MIN button to start the adjustment.

The calibration adjustment will be conrmed by a long beep.

Themeterwillthendisplay"CAL2"tocalibratethesecondcalibration

point.Insertthetipofthemeterintothe75%RHHumidityCalibration

Standard(REEDR9975)thenpressMAX/MIN button to start the adjust-

ment. The calibration adjustment will be conrmed by a long beep.

6. After both calibrations are complete, the meter will resume normal

operation.

Note: The calibration steps can be cancelled at any point by pressing the

ON/OFFbutton.

Restoring Factory Settings

1. Turn the meter off.

PresstheHOLD,°C/°F,andpowerbuttonsimultaneously,thenrelease.

3. WhentheLCDashes,presstheMAX/MIN button to restore factory

default settings.

4. A long beep will conrm factory settings have been restored. The

meter will then resume normal operation.

Battery Replacement

When the low battery indicator appears on the display, the battery should be

replaced.Removethebatterycoveronthebackandinsertanew9Vbattery.

Accessories and Replacement Parts

CA-05A Soft Carrying Case

R993333%HumidityCalibrationStandard

R997575%HumidityCalibrationStandard

R998033%and75%HumidityCalibrationKit

Don't see your part listed here? For a complete list of all accessories and

replacement parts visit your product page on www.reedinstruments.com.

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

Applications

• Environmentalstudies

• Fooddistribution

• HVAC/Rsysteminstallation

• Greenhousesandindustrialspaces

• Saunas

• Humidors

• Museums

• LabMonitoring

Product Care

Tokeepyourinstrumentingoodworkingorderwerecommendthefollowing:

• Storeyourproductinaclean,dryplace.

• Changethebatteryasneeded.

• Ifyourinstrumentisn'tbeingusedforaperiodofonemonthorlonger

please remove the battery.

• Cleanyourproductandaccessorieswithbiodegradablecleaner.Donot

spraythecleanerdirectlyontheinstrument.Useonexternalpartsonly.

Product Warranty

REED Instruments guarantees this instrument to be free of defects in

materialorworkmanshipforaperiodofone(1)yearfromdateofshipment.

During the warranty period, REED Instruments will repair or replace, at no

charge, products or parts of a product that proves to be defective because

of improper material or workmanship, under normal use and maintenance.

REED Instruments total liability is limited to repair or replacement of the

product. REED Instruments shall not be liable for damages to goods,

property, or persons due to improper use or through attempts to utilize

theinstrumentunderconditionswhichexceedthedesignedcapabilities.

In order to begin the warranty service process, please contact us by email

at 1-877-849-2127 or info@reedinstruments.com to discuss the claim and

determine the appropriate steps to process the warranty.

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

Product Disposal and Recycling

Please follow local laws and regulations when disposing or recycling your

instrument.Yourproductcontainselectroniccomponentsandmustbe

disposed of separately from standard waste products.

Product Support

If you have any questions on your product, please contact your authorized

REED distributor or REED Instruments Customer Service by phone at

1-877-849-2127 or by email at info@reedinstruments.com.

Please visit www.REEDINSTRUMENTS.com for the most

up-to-date manuals, datasheets, product guides and software.

Product specifications subject to change without notice.

this manual is strictly prohibited without prior written permission

from REED Instruments.

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

www.REEDINSTRUMENTS.com

TEST & MEASURE

WITH CONFIDENCE

CHECK OUT OUR LATEST PRODUCTS!

1.800.561.8187info@REED-Direct.ca REED-Direct.ca

Otros manuales para R6001

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario